chore(docs): update code block syntax to specify python for clarity (#2770)

docs/source/phone_teleop.mdx

@@ -44,7 +44,7 @@ Modify the examples to use `PhoneOS.IOS` or `PhoneOS.ANDROID` in `PhoneConfig`.
 
 Teleoperation example:
 
-```36:43:examples/phone_so100_teleop.py
+```python
 from lerobot.teleoperators.phone.config_phone import PhoneConfig, PhoneOS
 
 teleop_config = PhoneConfig(phone_os=PhoneOS.IOS)  # or PhoneOS.ANDROID
@@ -103,7 +103,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - Kinematics are used in multiple steps. We use [Placo](https://github.com/Rhoban/placo) which is a wrapper around Pinocchio for handling our kinematics. We construct the kinematics object by passing the robot's URDF and target frame. We set `target_frame_name` to the gripper frame.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   kinematics_solver = RobotKinematics(
     urdf_path="./SO101/so101_new_calib.urdf",
     target_frame_name="gripper_frame_link",
@@ -114,7 +114,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `MapPhoneActionToRobotAction` step converts the calibrated phone pose and inputs into target deltas and gripper commands, below is shown what the step outputs.
 
-  ```src/lerobot/teleoperators/phone/phone_processor.py
+  ```python
   action["enabled"] = enabled
         action["target_x"] = -pos[1] if enabled else 0.0
         action["target_y"] = pos[0] if enabled else 0.0
@@ -127,7 +127,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `EEReferenceAndDelta` step converts target deltas to an absolute desired EE pose, storing a reference on enable, the `end_effector_step_sizes` are the step sizes for the EE pose and can be modified to change the motion speed.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   EEReferenceAndDelta(
       kinematics=kinematics_solver,
       end_effector_step_sizes={"x": 0.5, "y": 0.5, "z": 0.5},
@@ -138,7 +138,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `EEBoundsAndSafety` step clamps EE motion to a workspace and checks for large ee step jumps to ensure safety. The `end_effector_bounds` are the bounds for the EE pose and can be modified to change the workspace. The `max_ee_step_m` are the step limits for the EE pose and can be modified to change the safety limits.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   EEBoundsAndSafety(
       end_effector_bounds={"min": [-1.0, -1.0, -1.0], "max": [1.0, 1.0, 1.0]},
       max_ee_step_m=0.10,
@@ -147,7 +147,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `GripperVelocityToJoint` step turns a velocity‑like gripper input into absolute gripper position using the current measured state. The `speed_factor` is the factor by which the velocity is multiplied.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   GripperVelocityToJoint(speed_factor=20.0)
   ```
 
@@ -157,7 +157,7 @@ We use different IK initial guesses in the kinematic steps. As initial guess eit
 
 - Closed loop (used in record/eval): sets `initial_guess_current_joints=True` so IK starts from the measured joints each frame.
 
-  ```examples/phone_to_so100/record.py
+  ```python
   InverseKinematicsEEToJoints(
       kinematics=kinematics_solver,
       motor_names=list(robot.bus.motors.keys()),
@@ -167,7 +167,7 @@ We use different IK initial guesses in the kinematic steps. As initial guess eit
 
 - Open loop (used in replay): sets `initial_guess_current_joints=False` so IK continues from the previous IK solution rather than the measured state. This preserves action stability when we replay without feedback.
 
-  ```examples/phone_to_so100/replay.py
+  ```python
   InverseKinematicsEEToJoints(
       kinematics=kinematics_solver,
       motor_names=list(robot.bus.motors.keys()),

docs/source/processors_robots_teleop.mdx

@@ -30,7 +30,7 @@ Each of these pipelines handle different conversions between different action an
 
 Below is an example of the three pipelines that we use in the phone to SO-100 follower examples:
 
-```69:90:examples/phone_so100_record.py
+```python
 phone_to_robot_ee_pose_processor = RobotProcessorPipeline[RobotAction, RobotAction]( # teleop -> dataset action
     steps=[
         MapPhoneActionToRobotAction(platform=teleop_config.phone_os),
@@ -84,7 +84,7 @@ Dataset features are determined by the keys saved in the dataset. Each step can
 
 Below is and example of how we declare features with the `transform_features` method in the phone to SO-100 follower examples:
 
-```src/lerobot/robots/so100_follower/robot_kinematic_processor.py
+```python
     def transform_features(
         self, features: dict[PipelineFeatureType, dict[str, PolicyFeature]]
     ) -> dict[PipelineFeatureType, dict[str, PolicyFeature]]:
@@ -103,7 +103,7 @@ Here we declare what PolicyFeatures we modify in this step, so we know what feat
 
 Below is an example of how we aggregate and merge features in the phone to SO-100 record example:
 
-```121:145:examples/phone_so100_record.py
+```python
 features=combine_feature_dicts(
         # Run the feature contract of the pipelines
         # This tells you how the features would look like after the pipeline steps