chore(docs): update code block syntax to specify python for clarity (#2770)

docs/source/phone_teleop.mdx

@@ -44,7 +44,7 @@ Modify the examples to use `PhoneOS.IOS` or `PhoneOS.ANDROID` in `PhoneConfig`.
 
 Teleoperation example:
 
-```36:43:examples/phone_so100_teleop.py
+```python
 from lerobot.teleoperators.phone.config_phone import PhoneConfig, PhoneOS
 
 teleop_config = PhoneConfig(phone_os=PhoneOS.IOS)  # or PhoneOS.ANDROID
@@ -103,7 +103,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - Kinematics are used in multiple steps. We use [Placo](https://github.com/Rhoban/placo) which is a wrapper around Pinocchio for handling our kinematics. We construct the kinematics object by passing the robot's URDF and target frame. We set `target_frame_name` to the gripper frame.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   kinematics_solver = RobotKinematics(
     urdf_path="./SO101/so101_new_calib.urdf",
     target_frame_name="gripper_frame_link",
@@ -114,7 +114,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `MapPhoneActionToRobotAction` step converts the calibrated phone pose and inputs into target deltas and gripper commands, below is shown what the step outputs.
 
-  ```src/lerobot/teleoperators/phone/phone_processor.py
+  ```python
   action["enabled"] = enabled
         action["target_x"] = -pos[1] if enabled else 0.0
         action["target_y"] = pos[0] if enabled else 0.0
@@ -127,7 +127,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `EEReferenceAndDelta` step converts target deltas to an absolute desired EE pose, storing a reference on enable, the `end_effector_step_sizes` are the step sizes for the EE pose and can be modified to change the motion speed.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   EEReferenceAndDelta(
       kinematics=kinematics_solver,
       end_effector_step_sizes={"x": 0.5, "y": 0.5, "z": 0.5},
@@ -138,7 +138,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `EEBoundsAndSafety` step clamps EE motion to a workspace and checks for large ee step jumps to ensure safety. The `end_effector_bounds` are the bounds for the EE pose and can be modified to change the workspace. The `max_ee_step_m` are the step limits for the EE pose and can be modified to change the safety limits.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   EEBoundsAndSafety(
       end_effector_bounds={"min": [-1.0, -1.0, -1.0], "max": [1.0, 1.0, 1.0]},
       max_ee_step_m=0.10,
@@ -147,7 +147,7 @@ Additionally you can customize mapping or safety limits by editing the processor
 
 - The `GripperVelocityToJoint` step turns a velocity‑like gripper input into absolute gripper position using the current measured state. The `speed_factor` is the factor by which the velocity is multiplied.
 
-  ```examples/phone_to_so100/teleoperate.py
+  ```python
   GripperVelocityToJoint(speed_factor=20.0)
   ```
 
@@ -157,7 +157,7 @@ We use different IK initial guesses in the kinematic steps. As initial guess eit
 
 - Closed loop (used in record/eval): sets `initial_guess_current_joints=True` so IK starts from the measured joints each frame.
 
-  ```examples/phone_to_so100/record.py
+  ```python
   InverseKinematicsEEToJoints(
       kinematics=kinematics_solver,
       motor_names=list(robot.bus.motors.keys()),
@@ -167,7 +167,7 @@ We use different IK initial guesses in the kinematic steps. As initial guess eit
 
 - Open loop (used in replay): sets `initial_guess_current_joints=False` so IK continues from the previous IK solution rather than the measured state. This preserves action stability when we replay without feedback.
 
-  ```examples/phone_to_so100/replay.py
+  ```python
   InverseKinematicsEEToJoints(
       kinematics=kinematics_solver,
       motor_names=list(robot.bus.motors.keys()),