feat(motors): add RobStride CAN implementation (#2821)

* feat(motors): add initial implementation of robstride

Co-authored-by: Virgile <virgilebatto@gmail.com>

* chore(motors): solve some linter

* remove kp/kd attribute

* code uniformisation between damiao and robstride

* remove normalization warning

* remove non valid baudrates and small docstring update

* remove all useless files. Only keeping robstride.py and table.py

* typing for mypy

* reduce NameOrId usage

* align signature with damiao

* put the same helper than in the damiao implementation

* bug correction : expect a response after each bus.send

---------

Co-authored-by: Virgile <virgilebatto@gmail.com>

src/lerobot/motors/robstride/__init__.py

@@ -0,0 +1,18 @@
+#!/usr/bin/env python
+
+# Copyright 2026 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from .robstride import RobstrideMotorsBus
+from .tables import *

src/lerobot/motors/robstride/tables.py

@@ -0,0 +1,120 @@
+# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Configuration tables for Damiao motors."""
+
+from enum import IntEnum
+
+
+# Motor type definitions
+class MotorType(IntEnum):
+    O0 = 0
+    O1 = 1
+    O2 = 2
+    O3 = 3
+    O4 = 4
+    O5 = 5
+    ELO5 = 6
+    O6 = 7
+
+
+class CommMode(IntEnum):
+    PrivateProtocole = 0
+    CANopen = 1
+    MIT = 2
+
+
+# Control modes
+class ControlMode(IntEnum):
+    MIT = 0
+    POS_VEL = 1
+    VEL = 2
+
+
+# Motor limit parameters [PMAX, VMAX, TMAX]
+# PMAX: Maximum position (rad)
+# VMAX: Maximum velocity (rad/s)
+# TMAX: Maximum torque (N·m)
+MOTOR_LIMIT_PARAMS: dict[MotorType, tuple[float, float, float]] = {
+    MotorType.O0: (12.57, 33, 14),
+    MotorType.O1: (12.57, 44, 17),
+    MotorType.O2: (12.57, 33, 20),
+    MotorType.O3: (12.57, 33, 60),
+    MotorType.O4: (12.57, 33, 120),
+    MotorType.O5: (12.57, 50, 5.5),
+    MotorType.ELO5: (12.57, 50, 6),
+    MotorType.O6: (112.5, 50, 36),
+}
+
+# Motor model names
+MODEL_NAMES = {
+    MotorType.O0: "O0",
+    MotorType.O1: "O1",
+    MotorType.O2: "O2",
+    MotorType.O3: "O3",
+    MotorType.O4: "O4",
+    MotorType.O5: "O5",
+    MotorType.ELO5: "ELO5",
+    MotorType.O6: "O6",
+}
+
+# Motor resolution table (encoder counts per revolution)
+MODEL_RESOLUTION = {
+    "O0": 65536,
+    "O1": 65536,
+    "O2": 65536,
+    "O3": 65536,
+    "O4": 65536,
+    "O5": 65536,
+    "ELO5": 65536,
+    "O6": 65536,
+}
+
+# CAN baudrates supported by Robstride motors
+AVAILABLE_BAUDRATES = [
+    1000000,  # 4: 1 mbps (default)
+]
+DEFAULT_BAUDRATE = 1000000
+
+# Default timeout in milliseconds
+DEFAULT_TIMEOUT_MS = 0  # disabled by default, otherwise 20000 is 1s
+
+
+# Data that should be normalized
+NORMALIZED_DATA = ["Present_Position", "Goal_Position"]
+
+
+# MIT control parameter ranges
+MIT_KP_RANGE = (0.0, 500.0)
+MIT_KD_RANGE = (0.0, 5.0)
+
+# CAN frame command IDs
+CAN_CMD_ENABLE = 0xFC
+CAN_CMD_DISABLE = 0xFD
+CAN_CMD_SET_ZERO = 0xFE
+CAN_CMD_CLEAR_FAULT = 0xFB
+
+
+CAN_CMD_QUERY_PARAM = 0x33
+CAN_CMD_WRITE_PARAM = 0x55
+CAN_CMD_SAVE_PARAM = 0xAA
+
+# CAN ID for parameter operations
+CAN_PARAM_ID = 0x7FF
+
+
+RUNNING_TIMEOUT = 0.001
+PARAM_TIMEOUT = 0.01
+
+STATE_CACHE_TTL_S = 0.02

src/lerobot/scripts/lerobot_setup_can.py

@@ -152,6 +152,7 @@ def test_motor(bus, motor_id: int, timeout: float, use_fd: bool):
     )
     try:
         bus.send(disable_msg)
+        bus.recv(timeout=0.1)  # Clear any pending responses
     except Exception:
         print(f"Error sending message to motor 0x{motor_id:02X}")