lerobot/tests/robots/test_so100_follower.py

#!/usr/bin/env python

# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from contextlib import contextmanager
from unittest.mock import MagicMock, patch

import pytest

from lerobot.robots.so_follower import (
    SO100Follower,
    SO100FollowerConfig,
)


def _make_bus_mock() -> MagicMock:
    """Return a bus mock with just the attributes used by the robot."""
    bus = MagicMock(name="FeetechBusMock")
    bus.is_connected = False

    def _connect():
        bus.is_connected = True

    def _disconnect(_disable=True):
        bus.is_connected = False

    bus.connect.side_effect = _connect
    bus.disconnect.side_effect = _disconnect

    @contextmanager
    def _dummy_cm():
        yield

    bus.torque_disabled.side_effect = _dummy_cm

    return bus


@pytest.fixture
def follower(tmp_path):
    bus_mock = _make_bus_mock()

    def _bus_side_effect(*_args, **kwargs):
        bus_mock.motors = kwargs["motors"]
        motors_order: list[str] = list(bus_mock.motors)

        bus_mock.sync_read.return_value = {motor: idx for idx, motor in enumerate(motors_order, 1)}
        bus_mock.sync_write.return_value = None
        bus_mock.write.return_value = None
        bus_mock.disable_torque.return_value = None
        bus_mock.enable_torque.return_value = None
        bus_mock.is_calibrated = True
        return bus_mock

    with (
        patch(
            "lerobot.robots.so_follower.so_follower.FeetechMotorsBus",
            side_effect=_bus_side_effect,
        ),
        patch.object(SO100Follower, "configure", lambda self: None),
    ):
        cfg = SO100FollowerConfig(port="/dev/null", calibration_dir=tmp_path)
        robot = SO100Follower(cfg)
        yield robot
        if robot.is_connected:
            robot.disconnect()


def test_connect_disconnect(follower):
    assert not follower.is_connected

    follower.connect()
    assert follower.is_connected

    follower.disconnect()
    assert not follower.is_connected


def test_get_observation(follower):
    follower.connect()
    obs = follower.get_observation()

    expected_keys = {f"{m}.pos" for m in follower.bus.motors}
    assert set(obs.keys()) == expected_keys

    for idx, motor in enumerate(follower.bus.motors, 1):
        assert obs[f"{motor}.pos"] == idx


def test_get_observation_uses_read_retries(follower):
    # Feetech buses can intermittently fail a sync_read; the follower should forward the configured
    # retry count so transient failures don't abort the control loop (see #3131).
    follower.config.num_read_retries = 7
    follower.connect()
    follower.get_observation()

    follower.bus.sync_read.assert_called_once_with("Present_Position", num_retry=7)


def test_send_action_uses_read_retries(follower):
    follower.config.max_relative_target = 10.0
    follower.config.num_read_retries = 7
    follower.connect()

    action = {f"{motor}.pos": value * 10 for value, motor in enumerate(follower.bus.motors, 1)}
    follower.send_action(action)

    follower.bus.sync_read.assert_called_once_with("Present_Position", num_retry=7)


def test_send_action(follower):
    follower.connect()

    action = {f"{m}.pos": i * 10 for i, m in enumerate(follower.bus.motors, 1)}
    returned = follower.send_action(action)

    assert returned == action

    goal_pos = {m: (i + 1) * 10 for i, m in enumerate(follower.bus.motors)}
    follower.bus.sync_write.assert_called_once_with("Goal_Position", goal_pos)


def test_configure_writes_position_pid_coefficients():
    bus_mock = _make_bus_mock()
    bus_mock.motors = ["shoulder_pan"]
    robot = MagicMock()
    robot.bus = bus_mock
    robot.config = SO100FollowerConfig(
        port="/dev/null",
        position_p_coefficient=32,
        position_i_coefficient=1,
        position_d_coefficient=16,
    )

    SO100Follower.configure(robot)

    bus_mock.write.assert_any_call("P_Coefficient", "shoulder_pan", 32)
    bus_mock.write.assert_any_call("I_Coefficient", "shoulder_pan", 1)
    bus_mock.write.assert_any_call("D_Coefficient", "shoulder_pan", 16)


@pytest.mark.parametrize(
    "gripper_closed_pos, expected_drive_mode",
    [
        (2035, 0),  # closed position at range_min -> raw increases when opening -> not inverted
        (3528, 1),  # closed position at range_max -> raw increases when closing -> inverted
    ],
)
def test_calibrate_detects_gripper_drive_mode(follower, gripper_closed_pos, expected_drive_mode):
    """Regression test for #3942: the follower gripper can be mounted mirrored with respect to the
    leader's, in which case its raw position increases when closing. Calibration must detect this
    and set drive_mode=1 so that normalized values follow the 0=closed/100=open convention."""
    follower.connect()

    motors = list(follower.bus.motors)
    follower.bus.set_half_turn_homings.return_value = dict.fromkeys(motors, 0)
    follower.bus.record_ranges_of_motion.return_value = (
        dict.fromkeys(motors, 2035),
        dict.fromkeys(motors, 3528),
    )
    follower.bus.read.return_value = gripper_closed_pos

    with (
        patch("builtins.input", return_value=""),
        patch.object(type(follower), "_save_calibration", lambda self: None),
    ):
        follower.calibration = {}
        follower.calibrate()

    follower.bus.read.assert_called_with("Present_Position", "gripper", normalize=False)
    assert follower.calibration["gripper"].drive_mode == expected_drive_mode
    for motor in motors:
        if motor != "gripper":
            assert follower.calibration[motor].drive_mode == 0