feat(config): add MIT control mode ReBot

- Add configurable arm control mode (mit default, pos_vel fallback) with tunable mit_kp / mit_kd
- Add optional gripper control mode (force_pos default, mit optional) with gripper_mit_kp / gripper_mit_kd
- Update tests for MIT arm routing, gripper mode routing, and revised joint limits

src/lerobot/robots/bi_rebot_b601_follower/bi_rebot_b601_follower.py

@@ -52,7 +52,13 @@ class BiRebotB601Follower(Robot):
             cameras=config.left_arm_config.cameras,
             motor_can_ids=config.left_arm_config.motor_can_ids,
             pos_vel_velocity=config.left_arm_config.pos_vel_velocity,
+            control_mode=config.left_arm_config.control_mode,
+            mit_kp=config.left_arm_config.mit_kp,
+            mit_kd=config.left_arm_config.mit_kd,
+            gripper_control_mode=config.left_arm_config.gripper_control_mode,
             gripper_torque_ratio=config.left_arm_config.gripper_torque_ratio,
+            gripper_mit_kp=config.left_arm_config.gripper_mit_kp,
+            gripper_mit_kd=config.left_arm_config.gripper_mit_kd,
             joint_limits=config.left_arm_config.joint_limits,
         )
 
@@ -67,7 +73,13 @@ class BiRebotB601Follower(Robot):
             cameras=config.right_arm_config.cameras,
             motor_can_ids=config.right_arm_config.motor_can_ids,
             pos_vel_velocity=config.right_arm_config.pos_vel_velocity,
+            control_mode=config.right_arm_config.control_mode,
+            mit_kp=config.right_arm_config.mit_kp,
+            mit_kd=config.right_arm_config.mit_kd,
+            gripper_control_mode=config.right_arm_config.gripper_control_mode,
             gripper_torque_ratio=config.right_arm_config.gripper_torque_ratio,
+            gripper_mit_kp=config.right_arm_config.gripper_mit_kp,
+            gripper_mit_kd=config.right_arm_config.gripper_mit_kd,
             joint_limits=config.right_arm_config.joint_limits,
         )
 

src/lerobot/robots/rebot_b601_follower/config_rebot_b601_follower.py

@@ -65,12 +65,27 @@ class RebotB601FollowerConfig:
         }
     )
 
-    # Target velocity for joints running in POS_VEL mode, in degrees/s. A scalar is
-    # applied to every joint; a list provides one value per joint (in motor order).
-    pos_vel_velocity: float | list[float] = field(default_factory=lambda: [150.0] * 7)
+    # Max speed (deg/s) per joint for POS_VEL arms and FORCE_POS gripper (motor order).
+    pos_vel_velocity: float | list[float] = field(
+        default_factory=lambda: [150.0, 150.0, 150.0, 150.0, 150.0, 150.0, 500.0]
+    )
 
-    # Torque/current ratio for the gripper's FORCE_POS mode, in range [0, 1].
-    gripper_torque_ratio: float = 0.1
+    # Arm control: "mit" or "pos_vel".
+    control_mode: str = "mit"
+
+    # MIT kp/kd per arm joint (motor order). Unused when control_mode="pos_vel".
+    mit_kp: float | list[float] = field(default_factory=lambda: [45.0, 45.0, 45.0, 8.0, 9.0, 8.0, 8.0])
+    mit_kd: float | list[float] = field(default_factory=lambda: [12.0, 12.0, 12.0, 1.0, 1.0, 1.0, 1.0])
+
+    # Gripper control: "force_pos" or "mit".
+    gripper_control_mode: str = "force_pos"
+
+    # FORCE_POS only: max grip force, in [0, 1].
+    gripper_torque_ratio: float = 0.05
+
+    # MIT only.
+    gripper_mit_kp: float = 8.0
+    gripper_mit_kd: float = 0.3
 
     # Soft joint limits (degrees). These are clipped against on every action.
     joint_limits: dict[str, tuple[float, float]] = field(

src/lerobot/robots/rebot_b601_follower/rebot_b601_follower.py

@@ -169,11 +169,25 @@ class RebotB601Follower(Robot):
         print(f"Calibration saved to {self.calibration_fpath}")
 
     def configure(self) -> None:
+        if self.config.control_mode not in ("pos_vel", "mit"):
+            raise ValueError(
+                f"Unsupported control_mode '{self.config.control_mode}'. Use 'pos_vel' or 'mit'."
+            )
+        if self.config.gripper_control_mode not in ("force_pos", "mit"):
+            raise ValueError(
+                f"Unsupported gripper_control_mode '{self.config.gripper_control_mode}'. "
+                "Use 'force_pos' or 'mit'."
+            )
+        use_mit = self.config.control_mode == "mit"
+        gripper_use_mit = self.config.gripper_control_mode == "mit"
         self.bus.enable_all()
         for motor_name, motor in self.motors.items():
-            target_mode = (
-                MotorBridgeMode.FORCE_POS if motor_name == GRIPPER_MOTOR else MotorBridgeMode.POS_VEL
-            )
+            if motor_name == GRIPPER_MOTOR:
+                target_mode = MotorBridgeMode.MIT if gripper_use_mit else MotorBridgeMode.FORCE_POS
+            elif use_mit:
+                target_mode = MotorBridgeMode.MIT
+            else:
+                target_mode = MotorBridgeMode.POS_VEL
             for attempt in range(_ENSURE_MODE_RETRIES + 1):
                 try:
                     motor.ensure_mode(target_mode)
@@ -230,44 +244,40 @@ class RebotB601Follower(Robot):
         """
         goal_pos = {key.removesuffix(".pos"): val for key, val in action.items() if key.endswith(".pos")}
 
-        # Clip against soft joint limits.
-        for motor_name in list(goal_pos):
-            if motor_name in self.config.joint_limits:
-                min_limit, max_limit = self.config.joint_limits[motor_name]
-                clipped = max(min_limit, min(max_limit, goal_pos[motor_name]))
-                if clipped != goal_pos[motor_name]:
-                    logger.debug(f"Clipped {motor_name} from {goal_pos[motor_name]:.2f} to {clipped:.2f}")
-                goal_pos[motor_name] = clipped
-
-        # Tolerate 6-DOF leaders that have no wrist_yaw joint by holding it at zero.
-        # This is intentional: it lets a 6-DOF leader such as the SO-100 / SO-101
-        # (so100_leader / so101_leader) teleoperate this 7-DOF follower — the missing
-        # wrist_yaw command is simply treated as 0.0 instead of raising.
-        if "wrist_yaw" not in goal_pos:
-            goal_pos["wrist_yaw"] = 0.0
-
         # Cap relative target when too far from the present position.
         if self.config.max_relative_target is not None:
             present_pos = self._present_pos()
             goal_present_pos = {key: (g, present_pos.get(key, g)) for key, g in goal_pos.items()}
             goal_pos = ensure_safe_goal_position(goal_present_pos, self.config.max_relative_target)
 
+        use_mit = self.config.control_mode == "mit"
         for motor_name, position_deg in goal_pos.items():
             motor = self.motors.get(motor_name)
             if motor is None:
                 continue
             idx = self.motor_names.index(motor_name)
-            vel_deg_s = (
-                self.config.pos_vel_velocity[idx]
-                if isinstance(self.config.pos_vel_velocity, list)
-                else self.config.pos_vel_velocity
-            )
             pos_rad = math.radians(position_deg)
-            vel_rad = math.radians(vel_deg_s)
             if motor_name == GRIPPER_MOTOR:
-                motor.send_force_pos(pos_rad, vel_rad, self.config.gripper_torque_ratio)
+                if self.config.gripper_control_mode == "mit":
+                    motor.send_mit(pos_rad, 0.0, self.config.gripper_mit_kp, self.config.gripper_mit_kd, 0.0)
+                else:
+                    vel_deg_s = (
+                        self.config.pos_vel_velocity[idx]
+                        if isinstance(self.config.pos_vel_velocity, list)
+                        else self.config.pos_vel_velocity
+                    )
+                    motor.send_force_pos(pos_rad, math.radians(vel_deg_s), self.config.gripper_torque_ratio)
+            elif use_mit:
+                kp = self.config.mit_kp[idx] if isinstance(self.config.mit_kp, list) else self.config.mit_kp
+                kd = self.config.mit_kd[idx] if isinstance(self.config.mit_kd, list) else self.config.mit_kd
+                motor.send_mit(pos_rad, 0.0, kp, kd, 0.0)
             else:
-                motor.send_pos_vel(pos_rad, vel_rad)
+                vel_deg_s = (
+                    self.config.pos_vel_velocity[idx]
+                    if isinstance(self.config.pos_vel_velocity, list)
+                    else self.config.pos_vel_velocity
+                )
+                motor.send_pos_vel(pos_rad, math.radians(vel_deg_s))
 
         return {f"{motor}.pos": val for motor, val in goal_pos.items()}
 

tests/robots/test_rebot_b601_follower.py

@@ -94,7 +94,8 @@ def test_send_action_clips_to_joint_limits(follower):
     # shoulder_pan limit is (-150, 150); request beyond the upper bound.
     returned = follower.send_action({"shoulder_pan.pos": 999.0})
     assert returned["shoulder_pan.pos"] == 150.0
-    follower.motors["shoulder_pan"].send_pos_vel.assert_called_once()
+    # Default control_mode is "mit", so arm joints are driven via send_mit.
+    follower.motors["shoulder_pan"].send_mit.assert_called_once()
 
 
 def test_send_action_routes_gripper_to_force_pos(follower):
@@ -103,6 +104,22 @@ def test_send_action_routes_gripper_to_force_pos(follower):
     follower.motors["gripper"].send_pos_vel.assert_not_called()
 
 
+def test_gripper_mit_mode_routes_to_send_mit():
+    bus_mock = _make_bus_mock()
+    with (
+        patch(f"{_MODULE}.require_package", lambda *a, **kw: None),
+        patch(f"{_MODULE}.MotorBridgeController") as controller_cls,
+        patch(f"{_MODULE}.MotorBridgeMode", MagicMock()),
+    ):
+        controller_cls.from_dm_serial.return_value = bus_mock
+        cfg = RebotB601FollowerRobotConfig(port="/dev/null", gripper_control_mode="mit")
+        robot = RebotB601Follower(cfg)
+        robot.connect(calibrate=False)
+        robot.send_action({"gripper.pos": -10.0})
+        robot.motors["gripper"].send_mit.assert_called_once()
+        robot.motors["gripper"].send_force_pos.assert_not_called()
+
+
 def test_bimanual_prefixes_features():
     with patch(f"{_MODULE}.require_package", lambda *a, **kw: None):
         cfg = BiRebotB601FollowerConfig(