unitree_go2 robot: high-level sport-mode body-velocity control over DDS
(unitree_sdk2py) straight from the host — no companion computer, unlike
the G1's low-level ZMQ bridge. Actions x.vel/y.vel/theta.vel; observation
is planar odometry (rt/sportmodestate) + the built-in front camera via
VideoClient. SDK imported only in connect() so configs/features/tests
work without it; 20 tests via mocks. unitree_go2 pyproject extra.
lerobot.navigation package: BaseController protocol + StubBaseController +
SafeBaseController (velocity clamp, occupancy gate, keyframe watchdog,
e-stop latch) + RobotBaseController wrapping any Robot on the standard
REP-103 mobile-base contract, carrying the world<->body velocity and
odometry<->world pose frame math. Robot-agnostic: the SDK lives only in
the robot class. 29 tests, SDK/torch-free.
First step of consolidating the dyna360 DynaMem navigation stack into
lerobot; dyna360 is a source to copy from, not a runtime dependency.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(config): update joint limits for RebotB601Follower and RebotArm102Leader
* feat(config): add MIT control mode ReBot
- Add configurable arm control mode (mit default, pos_vel fallback) with tunable mit_kp / mit_kd
- Add optional gripper control mode (force_pos default, mit optional) with gripper_mit_kp / gripper_mit_kd
- Update tests for MIT arm routing, gripper mode routing, and revised joint limits
* fix(robots): restore joint clipping and wrist_yaw fallback in ReBot B601 send_action
* feat(robot): increase gripper velocity and torque for rebot arm
* feat(robots): natively integrate Seeed Studio reBot B601-DM arm
Add first-class LeRobot support for the Seeed Studio reBot arm, replacing
the out-of-tree `lerobot-robot-seeed-b601` / `lerobot-teleoperator-rebot-arm-102`
plugin packages.
New devices:
- robot `rebot_b601_follower` — single-arm B601-DM follower (6-DOF + gripper,
Damiao CAN motors via `motorbridge`)
- robot `bi_rebot_b601_follower` — bimanual follower composing two single arms
- teleoperator `rebot_102_leader` — single-arm StarArm102 / reBot Arm 102 leader
(FashionStar UART servos via `motorbridge-smart-servo`)
- teleoperator `bi_rebot_102_leader` — bimanual leader composing two single arms
The bimanual variants reuse the single-arm classes and namespace each arm's
observation/action keys with `left_` / `right_` prefixes, so a bimanual
StarArm102 leader can teleoperate a bimanual reBot B601 follower.
Optional SDK imports are guarded; a `rebot` extra installs `motorbridge` and
`motorbridge-smart-servo`.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: add reBot B601-DM calibration & dual-arm teleoperation guide
Add docs/source/rebot_b601.mdx covering single-arm and bimanual
calibration and teleoperation for the reBot B601-DM follower and
reBot Arm 102 leader, with zero-position reference images from the
Seeed Studio wiki. Register the page in the docs toctree.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: fix reBot B601 MDX build (move JSON example out of <Tip>)
The doc-builder parses `{...}` inside MDX component children as a
Svelte expression, so the joint_directions JSON example broke the
build. Move it into a top-level fenced code block.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: apply prettier formatting to reBot B601 page
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: remove duplicate colocated reBot B601 page
docs/source/rebot_b601.mdx is the canonical, toctree-registered page;
the colocated rebot_b601.md was a redundant thinner copy.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* docs: clarify 6-DOF leader fallback comment in reBot B601 follower
Explain that holding wrist_yaw at zero is what lets a 6-DOF leader
(e.g. so100_leader / so101_leader) teleoperate the 7-DOF follower.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* refactor: address Caroline's PR review on reBot B601 integration
- leader: remove _validate_config (no other lerobot device validates its
config; a key mismatch now surfaces as a plain KeyError)
- leader: simplify _round_to_valid_range to direct modular arithmetic
instead of a bidirectional search loop
- leader: inline the single-use _clamp helper
- follower & leader: write MotorCalibration range_min/range_max from the
configured joint_limits / joint_ranges instead of a fixed [-90, 90]
- docs: add a "Find the USB ports" section (lerobot-find-port) and move
the brltty/permissions tip there; link the OpenArm page for SocketCAN
adapter configuration
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* feat(robots): consolidates bi SO setups
* fix(robots): solve circular dependecy
* fix(robots): teleop & record working
* feat(robots): only one SO
* fix(utils): rename bi so
* fix(scripts): bi so import
* fix(rl): remove imports
Pepijn