fix(cameras): correct validate_width_height logic

Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
Co-authored-by: Simon Alibert <simon.alibert@huggingface.co>
Co-authored-by: Simon Alibert <75076266+aliberts@users.noreply.github.com>

.cache/calibration/aloha_default/left_follower.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -2048
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2015,
+        3058,
+        3061,
+        1071,
+        1071,
+        2035,
+        2152,
+        2029,
+        2499
+    ],
+    "end_pos": [
+        -1008,
+        -1963,
+        -1966,
+        2141,
+        2143,
+        -971,
+        3043,
+        -1077,
+        3144
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.cache/calibration/aloha_default/left_leader.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -1024
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2035,
+        3024,
+        3019,
+        979,
+        981,
+        1982,
+        2166,
+        2124,
+        1968
+    ],
+    "end_pos": [
+        -990,
+        -2017,
+        -2015,
+        2078,
+        2076,
+        -1030,
+        3117,
+        -1016,
+        2556
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.cache/calibration/aloha_default/right_follower.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -2048
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2056,
+        2895,
+        2896,
+        1191,
+        1190,
+        2018,
+        2051,
+        2056,
+        2509
+    ],
+    "end_pos": [
+        -1040,
+        -2004,
+        -2006,
+        2126,
+        2127,
+        -1010,
+        3050,
+        -1117,
+        3143
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.cache/calibration/aloha_default/right_leader.json

@@ -0,0 +1,68 @@
+{
+    "homing_offset": [
+        2048,
+        3072,
+        3072,
+        -1024,
+        -1024,
+        2048,
+        -2048,
+        2048,
+        -2048
+    ],
+    "drive_mode": [
+        1,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0
+    ],
+    "start_pos": [
+        2068,
+        3034,
+        3030,
+        1038,
+        1041,
+        1991,
+        1948,
+        2090,
+        1985
+    ],
+    "end_pos": [
+        -1025,
+        -2014,
+        -2015,
+        2058,
+        2060,
+        -955,
+        3091,
+        -940,
+        2576
+    ],
+    "calib_mode": [
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "DEGREE",
+        "LINEAR"
+    ],
+    "motor_names": [
+        "waist",
+        "shoulder",
+        "shoulder_shadow",
+        "elbow",
+        "elbow_shadow",
+        "forearm_roll",
+        "wrist_angle",
+        "wrist_rotate",
+        "gripper"
+    ]
+}

.gitattributes

@@ -18,4 +18,4 @@
 *.arrow filter=lfs diff=lfs merge=lfs -text
 *.json !text !filter !merge !diff
 tests/artifacts/cameras/*.png filter=lfs diff=lfs merge=lfs -text
-*.bag filter=lfs diff=lfs merge=lfs -text
+tests/artifacts/cameras/*.bag filter=lfs diff=lfs merge=lfs -text

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,40 +1,33 @@
 ## What this does
-
 Explain what this PR does. Feel free to tag your PR with the appropriate label(s).
 
 Examples:
-| Title | Label |
+|  Title               | Label           |
 |----------------------|-----------------|
-| Fixes #[issue] | (🐛 Bug) |
-| Adds new dataset | (🗃️ Dataset) |
-| Optimizes something | (⚡️ Performance) |
+| Fixes #[issue]       | (🐛 Bug)        |
+| Adds new dataset     | (🗃️ Dataset)    |
+| Optimizes something  | (⚡️ Performance) |
 
 ## How it was tested
-
 Explain/show how you tested your changes.
 
 Examples:
-
 - Added `test_something` in `tests/test_stuff.py`.
 - Added `new_feature` and checked that training converges with policy X on dataset/environment Y.
 - Optimized `some_function`, it now runs X times faster than previously.
 
 ## How to checkout & try? (for the reviewer)
-
 Provide a simple way for the reviewer to try out your changes.
 
 Examples:
-
 ```bash
 pytest -sx tests/test_stuff.py::test_something
 ```
-
 ```bash
-lerobot-train --some.option=true
+python lerobot/scripts/train.py --some.option=true
 ```
 
 ## SECTION TO REMOVE BEFORE SUBMITTING YOUR PR
-
 **Note**: Anyone in the community is free to review the PR once the tests have passed. Feel free to tag
 members/contributors who may be interested in your PR. Try to avoid tagging more than 3 people.
 

.github/workflows/build-docker-images.yml

@@ -0,0 +1,135 @@
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Inspired by
+# https://github.com/huggingface/peft/blob/main/.github/workflows/build_docker_images.yml
+name: Builds
+
+on:
+  workflow_dispatch:
+  workflow_call:
+  schedule:
+    - cron: "0 1 * * *"
+
+permissions: {}
+
+env:
+  PYTHON_VERSION: "3.10"
+
+jobs:
+  latest-cpu:
+    name: CPU
+    runs-on:
+      group: aws-general-8-plus
+    steps:
+      - name: Install Git LFS
+        run: |
+          sudo apt-get update
+          sudo apt-get install git-lfs
+          git lfs install
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+        with:
+          cache-binary: false
+
+      - name: Check out code
+        uses: actions/checkout@v4
+        with:
+          lfs: true
+          persist-credentials: false
+
+      - name: Login to DockerHub
+        uses: docker/login-action@v3
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_PASSWORD }}
+
+      - name: Build and Push CPU
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./docker/lerobot-cpu/Dockerfile
+          push: true
+          tags: huggingface/lerobot-cpu
+          build-args: PYTHON_VERSION=${{ env.PYTHON_VERSION }}
+
+
+  latest-cuda:
+    name: GPU
+    runs-on:
+      group: aws-general-8-plus
+    steps:
+      - name: Install Git LFS
+        run: |
+          sudo apt-get update
+          sudo apt-get install git-lfs
+          git lfs install
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+        with:
+          cache-binary: false
+
+      - name: Check out code
+        uses: actions/checkout@v4
+        with:
+          lfs: true
+          persist-credentials: false
+
+      - name: Login to DockerHub
+        uses: docker/login-action@v3
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_PASSWORD }}
+
+      - name: Build and Push GPU
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./docker/lerobot-gpu/Dockerfile
+          push: true
+          tags: huggingface/lerobot-gpu
+          build-args: PYTHON_VERSION=${{ env.PYTHON_VERSION }}
+
+
+  latest-cuda-dev:
+    name: GPU Dev
+    runs-on:
+      group: aws-general-8-plus
+    steps:
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+        with:
+          cache-binary: false
+
+      - name: Check out code
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+
+      - name: Login to DockerHub
+        uses: docker/login-action@v3
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_PASSWORD }}
+
+      - name: Build and Push GPU dev
+        uses: docker/build-push-action@v5
+        with:
+          context: .
+          file: ./docker/lerobot-gpu-dev/Dockerfile
+          push: true
+          tags: huggingface/lerobot-gpu:dev
+          build-args: PYTHON_VERSION=${{ env.PYTHON_VERSION }}

.github/workflows/build_documentation.yml

@@ -0,0 +1,23 @@
+name: Build documentation
+
+on:
+  workflow_dispatch:
+  push:
+    paths:
+      - "docs/**"
+    branches:
+    - main
+    - doc-builder*
+    - v*-release
+
+
+jobs:
+  build:  # zizmor: ignore[excessive-permissions] We follow the same pattern as in Transformers
+    uses: huggingface/doc-builder/.github/workflows/build_main_documentation.yml@main
+    with:
+      commit_sha: ${{ github.sha }}
+      package: lerobot
+      additional_args: --not_python_module
+    secrets:
+      token: ${{ secrets.HUGGINGFACE_PUSH }}
+      hf_token: ${{ secrets.HF_DOC_BUILD_PUSH }}

.github/workflows/build_pr_documentation.yml

@@ -0,0 +1,19 @@
+name: Build PR Documentation
+
+on:
+  pull_request:
+    paths:
+      - "docs/**"
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+jobs:
+  build:  # zizmor: ignore[excessive-permissions] We follow the same pattern as in Transformers
+    uses: huggingface/doc-builder/.github/workflows/build_pr_documentation.yml@main
+    with:
+      commit_sha: ${{ github.event.pull_request.head.sha }}
+      pr_number: ${{ github.event.number }}
+      package: lerobot
+      additional_args: --not_python_module

.github/workflows/documentation-upload-pr.yml

@@ -1,40 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This workflow uploads the documentation preview built for a PR and comments the link on the PR.
-name: Documentation PR Upload
-permissions:
-  contents: read
-  pull-requests: write
-
-on:
-  # Triggered by the completion of the main 'Documentation' workflow.
-  workflow_run: # zizmor: ignore[dangerous-triggers] We follow the same pattern as in Transformers
-    workflows: ["Documentation"]
-    types:
-      - completed
-
-jobs:
-  # This job uploads a preview of the documentation for a pull request.
-  upload_and_comment:
-    name: Upload Preview and Comment
-    if: >
-      github.event.workflow_run.event == 'pull_request' &&
-      github.event.workflow_run.conclusion == 'success'
-    uses: huggingface/doc-builder/.github/workflows/upload_pr_documentation.yml@main
-    with:
-      package_name: lerobot
-    secrets:
-      hf_token: ${{ secrets.HF_DOC_BUILD_PUSH }}
-      comment_bot_token: ${{ secrets.COMMENT_BOT_TOKEN }}

.github/workflows/documentation.yml

@@ -1,70 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This workflow handles building documentation for both main branches and PRs.
-name: Documentation
-
-on:
-  # Allows running this workflow manually from the Actions tab
-  workflow_dispatch:
-
-  # Triggers the workflow on push events to main for the docs folder
-  push:
-    branches:
-      - main
-    paths:
-      - "docs/**"
-
-  # Triggers the workflow on pull request events targeting main for the docs folder
-  pull_request:
-    branches:
-      - main
-    paths:
-      - "docs/**"
-
-# Ensures that only the latest commit for a PR or branch is built, canceling older runs.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  # This job builds and deploys the official documentation.
-  build_main_docs:
-    name: Build Main Docs
-    if: github.event_name == 'push' || github.event_name == 'workflow_dispatch'
-    permissions:
-      contents: read
-    uses: huggingface/doc-builder/.github/workflows/build_main_documentation.yml@main
-    with:
-      commit_sha: ${{ github.sha }}
-      package: lerobot
-      additional_args: --not_python_module
-    secrets:
-      token: ${{ secrets.HUGGINGFACE_PUSH }}
-      hf_token: ${{ secrets.HF_DOC_BUILD_PUSH }}
-
-  # This job builds a preview of the documentation for a pull request.
-  # The result of this job triggers the 'Upload PR Documentation' workflow.
-  build_pr_docs:
-    name: Build PR Docs
-    if: github.event_name == 'pull_request'
-    permissions:
-      contents: read
-      pull-requests: write
-    uses: huggingface/doc-builder/.github/workflows/build_pr_documentation.yml@main
-    with:
-      commit_sha: ${{ github.event.pull_request.head.sha }}
-      pr_number: ${{ github.event.number }}
-      package: lerobot
-      additional_args: --not_python_module

.github/workflows/fast_tests.yml

@@ -1,87 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This workflow handles fast testing.
-name: Fast Tests
-
-on:
-  # Allows running this workflow manually from the Actions tab
-  workflow_dispatch:
-
-  pull_request:
-    branches:
-      - main
-    paths:
-      - "src/**"
-      - "tests/**"
-      - ".github/workflows/**"
-      - "pyproject.toml"
-      - "Makefile"
-  push:
-    branches:
-      - main
-    paths:
-      - "src/**"
-      - "tests/**"
-      - ".github/workflows/**"
-      - "pyproject.toml"
-      - "Makefile"
-
-permissions:
-  contents: read
-
-# Sets up the environment variables
-env:
-  UV_VERSION: "0.8.0"
-  PYTHON_VERSION: "3.10"
-  DOCKER_IMAGE_NAME: huggingface/lerobot-gpu
-
-# Ensures that only the latest commit for a PR or branch is built, canceling older runs.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  # This job runs pytests with the default dependencies.
-  # It runs everytime we commit to a PR or push to main
-  fast-pytest-tests:
-    name: Fast Pytest Tests
-    runs-on: ubuntu-latest
-    env:
-      MUJOCO_GL: egl
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-          lfs: true
-
-      # TODO(Steven): Evaluate the need of these dependencies
-      - name: Install apt dependencies
-        run: |
-          sudo apt-get update && sudo apt-get install -y build-essential git \
-          curl libglib2.0-0 libegl1-mesa-dev ffmpeg \
-          libusb-1.0-0-dev speech-dispatcher libgeos-dev portaudio19-dev
-
-      - name: Setup uv and Python
-        uses: astral-sh/setup-uv@v6 # zizmor: ignore[unpinned-uses]
-        with:
-          enable-cache: true
-          version: ${{ env.UV_VERSION }}
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install lerobot with test extras
-        run: uv sync --extra "test"
-
-      - name: Run pytest
-        run: uv run pytest tests -vv --maxfail=10

.github/workflows/full_tests.yml

@@ -1,210 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This workflow handles full testing.
-name: Full Tests
-
-on:
-  # Allows running this workflow manually from the Actions tab
-  workflow_dispatch:
-
-  pull_request_review:
-    types: [submitted]
-  push:
-    branches:
-      - main
-    paths:
-      - "src/**"
-      - "tests/**"
-      - ".github/workflows/**"
-      - "pyproject.toml"
-      - "Makefile"
-
-permissions:
-  contents: read
-
-# Sets up the environment variables
-env:
-  UV_VERSION: "0.8.0"
-  PYTHON_VERSION: "3.10"
-  DOCKER_IMAGE_NAME: huggingface/lerobot-gpu
-
-# Ensures that only the latest action is built, canceling older runs.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-
-  # This job runs the E2E tests + pytest with all extras
-  # It runs everytime a PR is approved or a push to main
-  full-tests:
-    name: Full Tests
-    runs-on: ubuntu-latest
-    if: |
-      (github.event_name == 'pull_request_review' && github.event.review.state == 'approved') ||
-      github.event_name == 'push' ||
-      github.event_name == 'workflow_dispatch'
-    env:
-      MUJOCO_GL: egl
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          lfs: true
-          persist-credentials: false
-
-      - name: Install apt dependencies
-        run: |
-          sudo apt-get update && sudo apt-get install -y build-essential \
-          git curl libglib2.0-0 libegl1-mesa-dev ffmpeg libusb-1.0-0-dev \
-          speech-dispatcher libgeos-dev portaudio19-dev
-
-      - name: Setup uv and Python
-        uses: astral-sh/setup-uv@v6 # zizmor: ignore[unpinned-uses]
-        with:
-          enable-cache: true
-          version: ${{ env.UV_VERSION }}
-          python-version: ${{ env.PYTHON_VERSION }}
-
-      - name: Install lerobot with all extras
-        run: uv sync --all-extras
-
-      - name: Run pytest (all extras)
-        run: uv run pytest tests -vv --maxfail=10
-
-      - name: Run end-to-end tests
-        run: uv run make test-end-to-end
-
-  # This job builds a GPU enabled image for testing
-  # It runs everytime a PR is approved or a push to main
-  # TODO(Steven): For now we skip this job for community PRs
-  build-and-push-docker:
-    name: Build and Push Docker
-    runs-on:
-      group: aws-general-8-plus
-    if: |
-      (github.event_name == 'pull_request_review' && github.event.review.state == 'approved' && github.event.pull_request.head.repo.fork == false) ||
-      github.event_name == 'push' ||
-      github.event_name == 'workflow_dispatch'
-    outputs:
-      image_tag: ${{ steps.set_tag.outputs.image_tag }}
-    env:
-      GITHUB_EVENT_NAME: ${{ github.event_name }}
-      GITHUB_REF: ${{ github.ref }}
-      GITHUB_PR_NUMBER: ${{ github.event.pull_request.number }}
-    steps:
-      - name: Set Docker image tag
-        id: set_tag
-        run: |
-          if [[ "${GITHUB_EVENT_NAME}" == "push" ]]; then
-            TAG="${DOCKER_IMAGE_NAME}:latest"
-          elif [[ -n "${GITHUB_PR_NUMBER}" ]]; then
-            TAG="${DOCKER_IMAGE_NAME}:pr-${GITHUB_PR_NUMBER}"
-          else
-            TAG="${DOCKER_IMAGE_NAME}:pr-${GITHUB_REF##*/}"
-          fi
-          echo "image_tag=$TAG" >> $GITHUB_OUTPUT
-      - name: Install Git LFS
-        run: |
-          sudo apt-get update
-          sudo apt-get install git-lfs
-          git lfs install
-      - uses: actions/checkout@v4
-        with:
-          lfs: true
-          persist-credentials: false
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3 # zizmor: ignore[unpinned-uses]
-        with:
-          cache-binary: false
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3 # zizmor: ignore[unpinned-uses]
-        with:
-          username: ${{ secrets.DOCKERHUB_LEROBOT_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_LEROBOT_PASSWORD }}
-      - name: Build and push Docker image
-        uses: docker/build-push-action@v6 # zizmor: ignore[unpinned-uses]
-        with:
-          context: .
-          file: ./docker/Dockerfile.internal
-          push: true
-          tags: ${{ steps.set_tag.outputs.image_tag }}
-
-  # This job runs pytest with all extras in a GPU enabled host
-  # It runs everytime a test image is created
-  gpu-tests:
-    name: GPU Tests
-    needs: [build-and-push-docker]
-    runs-on:
-      group: aws-g6-4xlarge-plus
-    env:
-      HF_HOME: /home/user_lerobot/.cache/huggingface
-      HF_LEROBOT_HOME: /home/user_lerobot/.cache/huggingface/lerobot
-      TORCH_HOME: /home/user_lerobot/.cache/torch
-      TRITON_CACHE_DIR: /home/user_lerobot/.cache/triton
-    container:
-      image: ${{ needs.build-and-push-docker.outputs.image_tag }} # zizmor: ignore[unpinned-images]
-      options: --gpus all --shm-size "16gb"
-      credentials:
-        username: ${{ secrets.DOCKERHUB_LEROBOT_USERNAME }}
-        password: ${{ secrets.DOCKERHUB_LEROBOT_PASSWORD }}
-    defaults:
-      run:
-        shell: bash
-        working-directory: /lerobot
-    steps:
-      - name: Run pytest on GPU
-        run: pytest tests -vv --maxfail=10
-      - name: Run end-to-end tests
-        run: make test-end-to-end
-
-  # This job deletes the test image recently created
-  # It runs everytime after the gpu-tests have finished
-  delete-pr-image:
-    name: Delete PR Image
-    needs: [gpu-tests, build-and-push-docker]
-    if: always() && ((github.event.review.state == 'approved') || (github.event_name == 'workflow_dispatch')) && needs.build-and-push-docker.result == 'success'
-    runs-on: ubuntu-latest
-    steps:
-      - name: Get Docker Hub Token and Delete Image
-        # zizmor: ignore[template-injection]
-        run: |
-          IMAGE_NAME=$(echo "${{ needs.build-and-push-docker.outputs.image_tag }}" | cut -d':' -f1)
-          IMAGE_TAG=$(echo "${{ needs.build-and-push-docker.outputs.image_tag }}" | cut -d':' -f2)
-
-          echo "Attempting to delete image: $IMAGE_NAME:$IMAGE_TAG"
-
-          TOKEN=$(curl -s -H "Content-Type: application/json" \
-                       -X POST \
-                       -d '{"username": "${{ secrets.DOCKERHUB_LEROBOT_USERNAME }}", "password": "${{ secrets.DOCKERHUB_LEROBOT_PASSWORD }}"}' \
-                       https://hub.docker.com/v2/users/login/ | jq -r .token)
-
-          if [ "$TOKEN" == "null" ] || [ -z "$TOKEN" ]; then
-            echo "::error::Failed to get Docker Hub token."
-            exit 1
-          fi
-
-          HTTP_RESPONSE=$(curl -s -o /dev/null -w "%{http_code}" \
-                               -H "Authorization: JWT ${TOKEN}" \
-                               -X DELETE \
-                               https://hub.docker.com/v2/repositories/${IMAGE_NAME}/tags/${IMAGE_TAG}/)
-
-          if [ "$HTTP_RESPONSE" -eq 204 ]; then
-            echo "Successfully deleted Docker image tag: $IMAGE_NAME:$IMAGE_TAG"
-          else
-            echo "::error::Failed to delete Docker image. HTTP status: $HTTP_RESPONSE"
-            exit 1
-          fi
-
-# TODO(Steven): Check dockerimages pull in ubuntu

.github/workflows/nightly-tests.yml

@@ -0,0 +1,93 @@
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Inspired by
+# https://github.com/huggingface/peft/blob/main/.github/workflows/nightly.yml
+name: Nightly
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "0 2 * * *"
+
+permissions: {}
+
+# env:
+  # SLACK_API_TOKEN: ${{ secrets.SLACK_API_TOKEN }}
+jobs:
+  run_all_tests_cpu:
+    name: CPU
+    strategy:
+      fail-fast: false
+    runs-on:
+      group: aws-general-8-plus
+    container:
+      image: huggingface/lerobot-cpu:latest
+      options: --shm-size "16gb"
+      credentials:
+        username: ${{ secrets.DOCKERHUB_USERNAME }}
+        password: ${{ secrets.DOCKERHUB_PASSWORD }}
+    defaults:
+      run:
+        shell: bash
+        working-directory: /lerobot
+    steps:
+      - name: Tests
+        run: pytest -v --cov=./lerobot --disable-warnings tests
+
+      - name: Tests end-to-end
+        run: make test-end-to-end
+
+
+  run_all_tests_single_gpu:
+    name: GPU
+    strategy:
+      fail-fast: false
+    runs-on:
+      group: aws-g6-4xlarge-plus
+    env:
+      CUDA_VISIBLE_DEVICES: "0"
+      TEST_TYPE: "single_gpu"
+    container:
+      image: huggingface/lerobot-gpu:latest
+      options: --gpus all --shm-size "16gb"
+      credentials:
+        username: ${{ secrets.DOCKERHUB_USERNAME }}
+        password: ${{ secrets.DOCKERHUB_PASSWORD }}
+    defaults:
+      run:
+        shell: bash
+        working-directory: /lerobot
+    steps:
+      - name: Nvidia-smi
+        run: nvidia-smi
+
+      - name: Test
+        run: pytest -v --cov=./lerobot --cov-report=xml --disable-warnings tests
+      #   TODO(aliberts): Link with HF Codecov account
+      # - name: Upload coverage reports to Codecov with GitHub Action
+      #   uses: codecov/codecov-action@v4
+      #   with:
+      #     files: ./coverage.xml
+      #     verbose: true
+      - name: Tests end-to-end
+        env:
+          DEVICE: cuda
+        run: make test-end-to-end
+
+    #   - name: Generate Report
+    #     if: always()
+    #     run: |
+    #       pip install slack_sdk tabulate
+    #       python scripts/log_reports.py >> $GITHUB_STEP_SUMMARY

.github/workflows/nightly.yml

@@ -1,160 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This workflow handles nightly testing & docker images publishing.
-name: Nightly
-permissions:
-  contents: read
-
-on:
-  # Allows running this workflow manually from the Actions tab
-  workflow_dispatch:
-
-  # Runs at 02:00
-  schedule:
-    - cron: "0 2 * * *"
-
-# Sets up the environment variables
-env:
-  UV_VERSION: "0.8.0"
-  PYTHON_VERSION: "3.10"
-  DOCKER_IMAGE_NAME_CPU: huggingface/lerobot-cpu:latest
-  DOCKER_IMAGE_NAME_GPU: huggingface/lerobot-gpu:latest
-
-# Ensures that only the latest commit is built, canceling older runs.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  # This job builds a CPU image for testing & distribution
-  build-docker-cpu-nightly:
-    name: Build CPU Docker for Nightly
-    runs-on:
-      group: aws-general-8-plus
-    outputs:
-      image_tag: ${{ env.DOCKER_IMAGE_NAME_CPU }}
-    steps:
-      - name: Install Git LFS
-        run: |
-          sudo apt-get update
-          sudo apt-get install git-lfs
-          git lfs install
-      - uses: actions/checkout@v4
-        with:
-          lfs: true
-          persist-credentials: false
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3 # zizmor: ignore[unpinned-uses]
-        with:
-          cache-binary: false
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3 # zizmor: ignore[unpinned-uses]
-        with:
-          username: ${{ secrets.DOCKERHUB_LEROBOT_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_LEROBOT_PASSWORD }}
-      - name: Build and push Docker image CPU
-        uses: docker/build-push-action@v6 # zizmor: ignore[unpinned-uses]
-        with:
-          context: .
-          file: ./docker/Dockerfile.user
-          push: true
-          tags: ${{ env.DOCKER_IMAGE_NAME_CPU }}
-
-  # This job builds a GPU image for testing & distribution
-  build-docker-gpu-nightly:
-    name: Build GPU Docker for Nightly
-    runs-on:
-      group: aws-general-8-plus
-    outputs:
-      image_tag: ${{ env.DOCKER_IMAGE_NAME_GPU }}
-    steps:
-      - name: Install Git LFS
-        run: |
-          sudo apt-get update
-          sudo apt-get install git-lfs
-          git lfs install
-      - uses: actions/checkout@v4
-        with:
-          lfs: true
-          persist-credentials: false
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3 # zizmor: ignore[unpinned-uses]
-        with:
-          cache-binary: false
-      - name: Login to Docker Hub
-        uses: docker/login-action@v3 # zizmor: ignore[unpinned-uses]
-        with:
-          username: ${{ secrets.DOCKERHUB_LEROBOT_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_LEROBOT_PASSWORD }}
-      - name: Build and push Docker image GPU
-        uses: docker/build-push-action@v6 # zizmor: ignore[unpinned-uses]
-        with:
-          context: .
-          file: ./docker/Dockerfile.internal
-          push: true
-          tags: ${{ env.DOCKER_IMAGE_NAME_GPU }}
-
-  # This job runs the E2E tests + pytest with all extras in the CPU image
-  nightly-cpu-tests:
-    name: Nightly CPU Tests
-    needs: [build-docker-cpu-nightly]
-    runs-on:
-      group: aws-g6-4xlarge-plus
-    env:
-      HF_HOME: /home/user_lerobot/.cache/huggingface
-      HF_LEROBOT_HOME: /home/user_lerobot/.cache/huggingface/lerobot
-      TORCH_HOME: /home/user_lerobot/.cache/torch
-      TRITON_CACHE_DIR: /home/user_lerobot/.cache/triton
-    container:
-      image: ${{ needs.build-docker-cpu-nightly.outputs.image_tag }} # zizmor: ignore[unpinned-images]
-      credentials:
-        username: ${{ secrets.DOCKERHUB_LEROBOT_USERNAME }}
-        password: ${{ secrets.DOCKERHUB_LEROBOT_PASSWORD }}
-    defaults:
-      run:
-        shell: bash
-        working-directory: /lerobot
-    steps:
-      - name: Run pytest on CPU
-        run: pytest tests -vv --maxfail=10
-      - name: Run end-to-end tests
-        run: make test-end-to-end
-
-  # This job runs the E2E tests + pytest with all extras in the GPU image
-  nightly-gpu-tests:
-    name: Nightly GPU Tests
-    needs: [build-docker-gpu-nightly]
-    runs-on:
-      group: aws-g6-4xlarge-plus
-    env:
-      HF_HOME: /home/user_lerobot/.cache/huggingface
-      HF_LEROBOT_HOME: /home/user_lerobot/.cache/huggingface/lerobot
-      TORCH_HOME: /home/user_lerobot/.cache/torch
-      TRITON_CACHE_DIR: /home/user_lerobot/.cache/triton
-    container:
-      image: ${{ needs.build-docker-gpu-nightly.outputs.image_tag }} # zizmor: ignore[unpinned-images]
-      options: --gpus all --shm-size "16gb"
-      credentials:
-        username: ${{ secrets.DOCKERHUB_LEROBOT_USERNAME }}
-        password: ${{ secrets.DOCKERHUB_LEROBOT_PASSWORD }}
-    defaults:
-      run:
-        shell: bash
-        working-directory: /lerobot
-    steps:
-      - name: Run pytest on GPU
-        run: pytest tests -vv --maxfail=10
-      - name: Run end-to-end tests
-        run: make test-end-to-end

.github/workflows/quality.yml

@@ -1,4 +1,4 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -12,47 +12,61 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-# This workflow handles linting, formatting, and static analysis checks for the codebase.
 name: Quality
-permissions:
-  contents: read
 
 on:
-  # Allows running this workflow manually from the Actions tab
   workflow_dispatch:
-
-  # Triggers the workflow on push events to main
+  workflow_call:
+  pull_request:
   push:
     branches:
       - main
 
-  # Triggers the workflow on pull request events targeting main
-  pull_request:
-    branches:
-      - main
+permissions: {}
 
-# Ensures that only the latest commit for a PR or branch is built, canceling older runs.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
+env:
+  PYTHON_VERSION: "3.10"
 
 jobs:
-  # This job runs pre-commit hooks to check code style and formatting.
-  pre-commit-checks:
-    name: Run Pre-commit Hooks (Lint, Format & Static Analysis)
+  style:
+    name: Style
     runs-on: ubuntu-latest
     steps:
-      - name: Checkout code
+      - name: Checkout Repository
         uses: actions/checkout@v4
         with:
           persist-credentials: false
 
       - name: Set up Python
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@v4
         with:
-          python-version: '3.10'
+          python-version: ${{ env.PYTHON_VERSION }}
 
-      - name: Run pre-commit hooks
-        uses: pre-commit/action@v3.0.1 # zizmor: ignore[unpinned-uses]
+      - name: Get Ruff Version from pre-commit-config.yaml
+        id: get-ruff-version
+        run: |
+          RUFF_VERSION=$(awk '/repo: https:\/\/github.com\/astral-sh\/ruff-pre-commit/{flag=1;next}/rev:/{if(flag){print $2;exit}}' .pre-commit-config.yaml)
+          echo "ruff_version=${RUFF_VERSION}" >> $GITHUB_OUTPUT
+
+      - name: Install Ruff
+        env:
+          RUFF_VERSION: ${{ steps.get-ruff-version.outputs.ruff_version }}
+        run: python -m pip install "ruff==${RUFF_VERSION}"
+
+      - name: Ruff check
+        run: ruff check --output-format=github
+
+      - name: Ruff format
+        run: ruff format --diff
+
+  typos:
+    name: Typos
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v4
         with:
-          extra_args: --all-files --show-diff-on-failure --color=always
+          persist-credentials: false
+
+      - name: typos-action
+        uses: crate-ci/typos@v1.29.10

.github/workflows/release.yml

@@ -1,171 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-name: Create Release and Publish to PyPI
-
-on:
-  push:
-    tags:
-      - 'v*.*.*' # Trigger on tags like v0.1.0, v1.0.0
-
-# Sets up the environment variables
-env:
-  UV_VERSION: "0.8.0"
-  PYTHON_VERSION: "3.10"
-
-jobs:
-  # This job builds the Python package and publishes it to PyPI
-  build-and-publish:
-    name: Build and publish Python distributions
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.extract_info.outputs.tag_version }}
-    permissions:
-      contents: write
-      id-token: write
-
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4
-        with:
-          persist-credentials: false
-
-      - name: Set up Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: '3.10'
-
-      - name: Extract Version
-        id: extract_info
-        # Extract version from tag (e.g., v0.1.0 -> 0.1.0)
-        # zizmor: ignore[template-injection]
-        run: |
-          VERSION=${{ github.ref_name }}
-          VERSION_NUMBER=${VERSION#v}
-          echo "tag_version=$VERSION_NUMBER" >> $GITHUB_OUTPUT
-      - name: Check if version matches pyproject.toml
-        if: startsWith(github.ref, 'refs/tags/v') && !contains(github.ref, '-')
-        # zizmor: ignore[template-injection]
-        run: |
-          TAG_VERSION=${{ steps.extract_info.outputs.tag_version }}
-
-          PYPROJECT_VERSION=$(grep '^version = ' pyproject.toml | awk -F' = ' '{print $2}' | tr -d '"')
-
-          if [[ "$TAG_VERSION" != "$PYPROJECT_VERSION" ]]; then
-            echo "Error: Tag version ($TAG_VERSION) does not match pyproject.toml version ($PYPROJECT_VERSION)." >&2
-            exit 1
-          else
-            echo "Tag version matches pyproject.toml version: $TAG_VERSION. Proceeding with release."
-          fi
-
-      - name: Check if version exists on PyPI
-      # zizmor: ignore[template-injection]
-        run: |
-          NEW_VERSION=${{ steps.extract_info.outputs.tag_version }}
-
-          response=$(curl -s "https://pypi.org/pypi/lerobot/$NEW_VERSION/json")
-          if echo "$response" | grep -q "message"; then
-            echo "Version $NEW_VERSION is available on PyPI. Proceeding with release."
-          else
-            echo "Error: Version $NEW_VERSION already exists on PyPI. Aborting."
-            exit 1
-          fi
-
-      - name: Install build dependencies
-        run: python -m pip install build
-
-      - name: Build package
-        run: python -m build
-
-      - name: Create GitHub Release
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        # zizmor: ignore[template-injection]
-        run: |
-          gh release create ${{ github.ref_name }} \
-            --title "Release ${{ github.ref_name }}" \
-            --generate-notes \
-            --draft=$([[ "${{ github.ref_name }}" == *-* ]] && echo true || echo false) \
-            --prerelease=$([[ "${{ github.ref_name }}" == *-* ]] && echo true || echo false) \
-            ./dist/*
-
-      - name: Publish to TestPyPI for pre-releases
-        # True for tags like 'v0.2.0-rc1'
-        if: startsWith(github.ref, 'refs/tags/v') && contains(github.ref, '-')
-        uses: pypa/gh-action-pypi-publish@v1.12.4 # zizmor: ignore[unpinned-uses, use-trusted-publishing]
-        with:
-          repository-url: https://test.pypi.org/legacy/
-          verbose: true
-          print-hash: true
-
-      - name: Publish to PyPI
-        if: startsWith(github.ref, 'refs/tags/v') && !contains(github.ref, '-')
-        uses: pypa/gh-action-pypi-publish@v1.12.4 # zizmor: ignore[unpinned-uses, use-trusted-publishing]
-        with:
-          verbose: true
-          print-hash: true
-
-  # This job runs end-to-end tests on the release
-  test-release:
-    name: Test Release
-    needs: [build-and-publish]
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-    env:
-      MUJOCO_GL: egl
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          lfs: true
-          persist-credentials: false
-      - name: Install apt dependencies
-        run: |
-          sudo apt-get update && sudo apt-get install -y build-essential \
-          git curl libglib2.0-0 libegl1-mesa-dev ffmpeg libusb-1.0-0-dev \
-          speech-dispatcher libgeos-dev portaudio19-dev
-      - name: Setup uv and Python
-        uses: astral-sh/setup-uv@v6 # zizmor: ignore[unpinned-uses]
-        with:
-          enable-cache: true
-          version: ${{ env.UV_VERSION }}
-          python-version: ${{ env.PYTHON_VERSION }}
-      - name: Create uv virtual environment
-        run: uv venv
-      - name: Install lerobot release
-        # zizmor: ignore[template-injection]
-        run: |
-          VERSION="${{ needs.build-and-publish.outputs.version }}"
-          if [[ "$VERSION" == *-* ]]; then
-            BASE_VERSION="${VERSION%%-*}"
-            echo "Installing pre-release version $BASE_VERSION from TestPyPI..."
-            uv pip install \
-              --index-url https://test.pypi.org/simple/ \
-              --extra-index-url https://pypi.org/simple \
-              --index-strategy unsafe-best-match \
-               "lerobot[all]==$BASE_VERSION"
-          else
-            echo "Installing release version $VERSION from PyPI..."
-            uv pip install "lerobot[all]==$VERSION"
-          fi
-      - name: Check lerobot version
-        run: uv run python -c "import lerobot; print(lerobot.__version__)"
-
-      - name: Run end-to-end tests
-        run: uv run make test-end-to-end
-
-
-# TODO(Steven): Publish draft/pre-release and to test pypi weekly
-# TODO(Steven): Separate build and publish job
-# TODO(Steven): Tag documentation with the same version as the package

.github/workflows/security.yml

@@ -1,54 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This workflow handles secret scanning using TruffleHog to detect sensitive information in the codebase.
-name: Security
-permissions:
-  contents: read
-
-on:
-  # Allows running this workflow manually from the Actions tab
-  workflow_dispatch:
-
-  # Triggers the workflow on push events to main
-  push:
-    branches:
-      - main
-
-  # Triggers the workflow on pull request events targeting main
-  pull_request:
-    branches:
-      - main
-
-# Ensures that only the latest commit for a PR or branch is built, canceling older runs.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  # This job runs TruffleHog to scan the full history of the repository for secrets.
-  trufflehog:
-    name: Secret Leaks Scan
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout code
-        uses: actions/checkout@v4 # zizmor: ignore[unpinned-uses]
-        with:
-          fetch-depth: 0
-          persist-credentials: false
-
-      - name: Secret Scanning
-        uses: trufflesecurity/trufflehog@v3.90.0  # zizmor: ignore[unpinned-uses]
-        with:
-          extra_args: --only-verified

.github/workflows/test-docker-build.yml

@@ -0,0 +1,82 @@
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Inspired by
+# https://github.com/huggingface/peft/blob/main/.github/workflows/test-docker-build.yml
+name: Test Dockerfiles
+
+on:
+  pull_request:
+    paths:
+      # Run only when DockerFile files are modified
+      - "docker/**"
+
+permissions: {}
+
+env:
+  PYTHON_VERSION: "3.10"
+
+jobs:
+  get_changed_files:
+    name: Detect modified Dockerfiles
+    runs-on: ubuntu-latest
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+    steps:
+      - name: Check out code
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+
+      - name: Get changed files
+        id: changed-files
+        uses: tj-actions/changed-files@3f54ebb830831fc121d3263c1857cfbdc310cdb9 #v42
+        with:
+          files: docker/**
+          json: "true"
+
+      - name: Run step if only the files listed above change  # zizmor: ignore[template-injection]
+        if: steps.changed-files.outputs.any_changed == 'true'
+        id: set-matrix
+        run: |
+          echo "matrix=${{ steps.changed-files.outputs.all_changed_files}}" >> $GITHUB_OUTPUT
+
+  build_modified_dockerfiles:
+    name: Build modified Docker images
+    needs: get_changed_files
+    runs-on:
+      group: aws-general-8-plus
+    if: needs.get_changed_files.outputs.matrix != ''
+    strategy:
+      fail-fast: false
+      matrix:
+        docker-file: ${{ fromJson(needs.get_changed_files.outputs.matrix) }}
+    steps:
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+        with:
+          cache-binary: false
+
+      - name: Check out code
+        uses: actions/checkout@v4
+        with:
+          persist-credentials: false
+
+      - name: Build Docker image
+        uses: docker/build-push-action@v5
+        with:
+          file: ${{ matrix.docker-file }}
+          context: .
+          push: False
+          build-args: PYTHON_VERSION=${{ env.PYTHON_VERSION }}

.github/workflows/test.yml

@@ -0,0 +1,150 @@
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+name: Tests
+
+on:
+  pull_request:
+    paths:
+      - "lerobot/**"
+      - "tests/**"
+      - "examples/**"
+      - ".github/**"
+      - "pyproject.toml"
+      - ".pre-commit-config.yaml"
+      - "Makefile"
+      - ".cache/**"
+  push:
+    branches:
+      - main
+    paths:
+      - "lerobot/**"
+      - "tests/**"
+      - "examples/**"
+      - ".github/**"
+      - "pyproject.toml"
+      - ".pre-commit-config.yaml"
+      - "Makefile"
+      - ".cache/**"
+
+permissions: {}
+
+env:
+  UV_VERSION: "0.6.0"
+
+jobs:
+  pytest:
+    name: Pytest
+    runs-on: ubuntu-latest
+    env:
+      MUJOCO_GL: egl
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          lfs: true  # Ensure LFS files are pulled
+          persist-credentials: false
+
+      - name: Install apt dependencies
+      # portaudio19-dev is needed to install pyaudio
+        run: |
+          sudo apt-get update && \
+          sudo apt-get install -y libegl1-mesa-dev ffmpeg portaudio19-dev
+
+      - name: Install uv and python
+        uses: astral-sh/setup-uv@v5
+        with:
+          enable-cache: true
+          version: ${{ env.UV_VERSION }}
+          python-version: "3.10"
+
+      - name: Install lerobot (all extras)
+        run: uv sync --all-extras
+
+      - name: Test with pytest
+        run: |
+          uv run pytest tests -v --cov=./lerobot --durations=0 \
+            -W ignore::DeprecationWarning:imageio_ffmpeg._utils:7 \
+            -W ignore::UserWarning:torch.utils.data.dataloader:558 \
+            -W ignore::UserWarning:gymnasium.utils.env_checker:247 \
+            && rm -rf tests/outputs outputs
+
+  pytest-minimal:
+    name: Pytest (minimal install)
+    runs-on: ubuntu-latest
+    env:
+      MUJOCO_GL: egl
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          lfs: true  # Ensure LFS files are pulled
+          persist-credentials: false
+
+      - name: Install apt dependencies
+        run: sudo apt-get update && sudo apt-get install -y ffmpeg
+
+      - name: Install uv and python
+        uses: astral-sh/setup-uv@v5
+        with:
+          enable-cache: true
+          version: ${{ env.UV_VERSION }}
+          python-version: "3.10"
+
+      - name: Install lerobot
+        run: uv sync --extra "test"
+
+      - name: Test with pytest
+        run: |
+          uv run pytest tests -v --cov=./lerobot --durations=0 \
+            -W ignore::DeprecationWarning:imageio_ffmpeg._utils:7 \
+            -W ignore::UserWarning:torch.utils.data.dataloader:558 \
+            -W ignore::UserWarning:gymnasium.utils.env_checker:247 \
+            && rm -rf tests/outputs outputs
+
+  end-to-end:
+    name: End-to-end
+    runs-on: ubuntu-latest
+    env:
+      MUJOCO_GL: egl
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          lfs: true  # Ensure LFS files are pulled
+          persist-credentials: false
+
+      - name: Install apt dependencies
+      # portaudio19-dev is needed to install pyaudio
+        run: |
+          sudo apt-get update && \
+          sudo apt-get install -y libegl1-mesa-dev ffmpeg portaudio19-dev
+
+      - name: Install uv and python
+        uses: astral-sh/setup-uv@v5
+        with:
+          enable-cache: true
+          version: ${{ env.UV_VERSION }}
+          python-version: "3.10"
+
+      - name: Install lerobot (all extras)
+        run: |
+          uv venv
+          uv sync --all-extras
+
+      - name: venv
+        run: |
+          echo "PYTHON_PATH=${{ github.workspace }}/.venv/bin/python" >> $GITHUB_ENV
+
+      - name: Test end-to-end
+        run: |
+          make test-end-to-end \
+            && rm -rf outputs

.github/workflows/trufflehog.yml

@@ -1,5 +1,3 @@
-#!/usr/bin/env python
-
 # Copyright 2024 The HuggingFace Inc. team. All rights reserved.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
@@ -14,23 +12,24 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-from dataclasses import dataclass
-from enum import Enum
+on:
+  push:
 
-import numpy as np
+name: Secret Leaks
 
-from ..config import TeleoperatorConfig
+permissions: {}
 
+jobs:
+  trufflehog:
+    runs-on: ubuntu-latest
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+        persist-credentials: false
 
-class PhoneOS(Enum):
-    ANDROID = "android"
-    IOS = "ios"
-
-
-@TeleoperatorConfig.register_subclass("phone")
-@dataclass
-class PhoneConfig(TeleoperatorConfig):
-    phone_os: PhoneOS = PhoneOS.IOS
-    camera_offset = np.array(
-        [0.0, -0.02, 0.04]
-    )  # iPhone 14 Pro camera is 2cm off center and 4cm above center
+    - name: Secret Scanning
+      uses: trufflesecurity/trufflehog@main
+      with:
+        extra_args: --only-verified

.github/workflows/upload_pr_documentation.yml

@@ -0,0 +1,16 @@
+name: Upload PR Documentation
+
+on: # zizmor: ignore[dangerous-triggers] We follow the same pattern as in Transformers
+  workflow_run:
+    workflows: [ "Build PR Documentation" ]
+    types:
+    - completed
+
+jobs:
+  build:  # zizmor: ignore[excessive-permissions] We follow the same pattern as in Transformers
+    uses: huggingface/doc-builder/.github/workflows/upload_pr_documentation.yml@main
+    with:
+      package_name: lerobot
+    secrets:
+      hf_token: ${{ secrets.HF_DOC_BUILD_PUSH }}
+      comment_bot_token: ${{ secrets.COMMENT_BOT_TOKEN }}

.gitignore

@@ -11,165 +11,163 @@
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
+.dev
+# Logging
+logs
+tmp
+wandb
 
-### Environments & Dependencies ###
+# Data
+data
+outputs
+
+# Apple
+.DS_Store
+
+# VS Code
+.vscode
+
+# HPC
+nautilus/*.yaml
+*.key
+
+# Slurm
+sbatch*.sh
+
+# Byte-compiled / optimized / DLL files
+__pycache__/
+*.py[cod]
+*$py.class
+
+# C extensions
+*.so
+
+# Distribution / packaging
+.Python
+build/
+develop-eggs/
+dist/
+downloads/
+eggs/
+.eggs/
+lib/
+lib64/
+parts/
+sdist/
+var/
+wheels/
+pip-wheel-metadata/
+share/python-wheels/
+*.egg-info/
+.installed.cfg
+*.egg
+MANIFEST
+
+# uv/poetry lock files
+poetry.lock
+uv.lock
+
+# PyInstaller
+#  Usually these files are written by a python script from a template
+#  before PyInstaller builds the exe, so as to inject date/other infos into it.
+*.manifest
+*.spec
+
+# Installer logs
+pip-log.txt
+pip-delete-this-directory.txt
+
+# Unit test / coverage reports
+!tests/artifacts
+htmlcov/
+.tox/
+.nox/
+.coverage
+.coverage.*
+nosetests.xml
+coverage.xml
+*.cover
+*.py,cover
+.hypothesis/
+.pytest_cache/
+
+# Ignore .cache except calibration
+.cache/*
+!.cache/calibration/
+!.cache/calibration/**
+
+# Translations
+*.mo
+*.pot
+
+# Django stuff:
+*.log
+local_settings.py
+db.sqlite3
+db.sqlite3-journal
+
+# Flask stuff:
+instance/
+.webassets-cache
+
+# Scrapy stuff:
+.scrapy
+
+# Sphinx documentation
+docs/_build/
+
+# PyBuilder
+.pybuilder/
+target/
+
+# Jupyter Notebook
+.ipynb_checkpoints
+
+# IPython
+profile_default/
+ipython_config.py
+
+# pyenv
+.python-version
+
+# PEP 582; used by e.g. github.com/David-OConnor/pyflow
+__pypackages__/
+
+# Celery stuff
+celerybeat-schedule
+celerybeat.pid
+
+# SageMath parsed files
+*.sage.py
+
+# Environments
 .env
 .venv
 env/
 venv/
 env.bak/
 venv.bak/
-.python-version
-__pypackages__/
-node_modules/
 
-# Lock files
-poetry.lock
-uv.lock
-Pipfile.lock
-
-### Build & Distribution ###
-build/
-dist/
-sdist/
-wheels/
-downloads/
-eggs/
-.eggs/
-parts/
-var/
-pip-wheel-metadata/
-share/python-wheels/
-develop-eggs/
-*.egg-info/
-.installed.cfg
-*.egg
-MANIFEST
-lib/
-lib64/
-
-# PyInstaller
-*.manifest
-*.spec
-
-### Compiled & Cached Files ###
-__pycache__/
-*.py[cod]
-*$py.class
-*.so
-*.sage.py
-.cache/
-.ruff_cache/
-.mypy_cache/
-.pyre/
-.pytype/
-cython_debug/
-
-### Testing & Coverage ###
-htmlcov/
-.tox/
-.nox/
-.coverage
-.coverage.*
-.pytest_cache/
-.hypothesis/
-nosetests.xml
-coverage.xml
-*.cover
-*.py,cover
-!tests/artifacts
-
-### Logs & Temporary Files ###
-logs/
-tmp/
-*.log
-pip-log.txt
-pip-delete-this-directory.txt
-celerybeat-schedule
-celerybeat.pid
-
-### IDE & Editor Config ###
-# VS Code
-.vscode/
-.devcontainer/
-
-# JetBrains / PyCharm
-.idea/
-
-# Spyder
+# Spyder project settings
 .spyderproject
 .spyproject
 
-# Rope
+# Rope project settings
 .ropeproject
 
-# Vim
-*.swp
-
-# Other
-*~
-
-### OS Specific ###
-# macOS
-.DS_Store
-
-# Windows
-Thumbs.db
-
-### Framework & Tool Specific ###
-
-.Python
-
-# Django
-local_settings.py
-db.sqlite3
-db.sqlite3-journal
-
-# Flask
-instance/
-.webassets-cache
-
-# Scrapy
-.scrapy
-
-# Jupyter
-.ipynb_checkpoints/
-profile_default/
-ipython_config.py
-
-# Sphinx
-docs/_build/
-
-# MkDocs
+# mkdocs documentation
 /site
 
-# PyBuilder
-.pybuilder/
-target/
-
 # mypy
+.mypy_cache/
 .dmypy.json
 dmypy.json
 
-### HPC & Slurm ###
-nautilus/*.yaml
-*.key
-sbatch*.sh
+# Pyre type checker
+.pyre/
 
-### Miscellaneous ###
-# W&B
-wandb/
+# pytype static type analyzer
+.pytype/
 
-# Dev scripts
-.dev/
-
-# Data folders
-data/
-outputs/
-
-# Translations
-*.mo
-*.pot
-
-# Dev folders
-.cache/*
+# Cython debug symbols
+cython_debug/

.pre-commit-config.yaml

@@ -12,11 +12,9 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
+exclude: "tests/artifacts/.*\\.safetensors$"
 default_language_version:
     python: python3.10
-
-exclude: "tests/artifacts/.*\\.safetensors$"
-
 repos:
   ##### Meta #####
   - repo: meta
@@ -24,12 +22,12 @@ repos:
       - id: check-useless-excludes
       - id: check-hooks-apply
 
-   ##### General Code Quality & Formatting #####
+
+  ##### Style / Misc. #####
   - repo: https://github.com/pre-commit/pre-commit-hooks
     rev: v5.0.0
     hooks:
       - id: check-added-large-files
-        args: ['--maxkb=1024']
       - id: debug-statements
       - id: check-merge-conflict
       - id: check-case-conflict
@@ -38,70 +36,39 @@ repos:
       - id: end-of-file-fixer
       - id: trailing-whitespace
 
-  - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.12.4
-    hooks:
-      - id: ruff-format
-      - id: ruff
-        args: [--fix, --exit-non-zero-on-fix]
-
   - repo: https://github.com/adhtruong/mirrors-typos
-    rev: v1.34.0
+    rev: v1.31.1
     hooks:
       - id: typos
         args: [--force-exclude]
 
   - repo: https://github.com/asottile/pyupgrade
-    rev: v3.20.0
+    rev: v3.19.1
     hooks:
     -   id: pyupgrade
-        args: [--py310-plus]
 
-  ##### Markdown Quality #####
-  - repo: https://github.com/rbubley/mirrors-prettier
-    rev: v3.6.2
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    rev: v0.11.5
     hooks:
-      - id: prettier
-        name: Format Markdown with Prettier
-        types_or: [markdown, mdx]
-        args: [--prose-wrap=preserve]
+      - id: ruff
+        args: [--fix]
+      - id: ruff-format
+
 
   ##### Security #####
   - repo: https://github.com/gitleaks/gitleaks
-    rev: v8.27.2
+    rev: v8.24.3
     hooks:
       - id: gitleaks
 
   - repo: https://github.com/woodruffw/zizmor-pre-commit
-    rev: v1.11.0
+    rev: v1.5.2
     hooks:
       - id: zizmor
 
   - repo: https://github.com/PyCQA/bandit
-    rev: 1.8.6
+    rev: 1.8.3
     hooks:
     - id: bandit
       args: ["-c", "pyproject.toml"]
       additional_dependencies: ["bandit[toml]"]
-
-  # TODO(Steven): Uncomment when ready to use
-  ##### Static Analysis & Typing #####
-  # - repo: https://github.com/pre-commit/mirrors-mypy
-  #   rev: v1.16.0
-  #   hooks:
-  #     - id: mypy
-  #       args: [--python-version=3.10]
-
-  ##### Docstring Checks #####
-  # - repo: https://github.com/akaihola/darglint2
-  #   rev: v1.8.2
-  #   hooks:
-  #     - id: darglint2
-  #       args: ["--docstring-style", "google", "-v", "2"]
-  #       exclude: ^tests/.*$
-
-  # - repo: https://github.com/econchick/interrogate
-  #   rev: 1.7.0
-  #   hooks:
-  #     - id: interrogate
-  #       args: ["-vv", "--config=pyproject.toml"]

CODE_OF_CONDUCT.md

@@ -1,3 +1,4 @@
+
 # Contributor Covenant Code of Conduct
 
 ## Our Pledge
@@ -17,23 +18,23 @@ diverse, inclusive, and healthy community.
 Examples of behavior that contributes to a positive environment for our
 community include:
 
-- Demonstrating empathy and kindness toward other people
-- Being respectful of differing opinions, viewpoints, and experiences
-- Giving and gracefully accepting constructive feedback
-- Accepting responsibility and apologizing to those affected by our mistakes,
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
   and learning from the experience
-- Focusing on what is best not just for us as individuals, but for the overall
+* Focusing on what is best not just for us as individuals, but for the overall
   community
 
 Examples of unacceptable behavior include:
 
-- The use of sexualized language or imagery, and sexual attention or advances of
+* The use of sexualized language or imagery, and sexual attention or advances of
   any kind
-- Trolling, insulting or derogatory comments, and personal or political attacks
-- Public or private harassment
-- Publishing others' private information, such as a physical or email address,
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email address,
   without their explicit permission
-- Other conduct which could reasonably be considered inappropriate in a
+* Other conduct which could reasonably be considered inappropriate in a
   professional setting
 
 ## Enforcement Responsibilities

CONTRIBUTING.md

@@ -15,11 +15,10 @@ Whichever way you choose to contribute, please be mindful to respect our
 ## You can contribute in so many ways!
 
 Some of the ways you can contribute to 🤗 LeRobot:
-
-- Fixing outstanding issues with the existing code.
-- Implementing new models, datasets or simulation environments.
-- Contributing to the examples or to the documentation.
-- Submitting issues related to bugs or desired new features.
+* Fixing outstanding issues with the existing code.
+* Implementing new models, datasets or simulation environments.
+* Contributing to the examples or to the documentation.
+* Submitting issues related to bugs or desired new features.
 
 Following the guides below, feel free to open issues and PRs and to coordinate your efforts with the community on our [Discord Channel](https://discord.gg/VjFz58wn3R). For specific inquiries, reach out to [Remi Cadene](mailto:remi.cadene@huggingface.co).
 
@@ -41,26 +40,24 @@ already reported** (use the search bar on Github under Issues).
 
 Did not find it? :( So we can act quickly on it, please follow these steps:
 
-- Include your **OS type and version**, the versions of **Python** and **PyTorch**.
-- A short, self-contained, code snippet that allows us to reproduce the bug in
+* Include your **OS type and version**, the versions of **Python** and **PyTorch**.
+* A short, self-contained, code snippet that allows us to reproduce the bug in
   less than 30s.
-- The full traceback if an exception is raised.
-- Attach any other additional information, like screenshots, you think may help.
+* The full traceback if an exception is raised.
+* Attach any other additional information, like screenshots, you think may help.
 
 ### Do you want a new feature?
 
 A good feature request addresses the following points:
 
 1. Motivation first:
-
-- Is it related to a problem/frustration with the library? If so, please explain
+* Is it related to a problem/frustration with the library? If so, please explain
   why. Providing a code snippet that demonstrates the problem is best.
-- Is it related to something you would need for a project? We'd love to hear
+* Is it related to something you would need for a project? We'd love to hear
   about it!
-- Is it something you worked on and think could benefit the community?
+* Is it something you worked on and think could benefit the community?
   Awesome! Tell us what problem it solved for you.
-
-2. Write a _paragraph_ describing the feature.
+2. Write a *paragraph* describing the feature.
 3. Provide a **code snippet** that demonstrates its future use.
 4. In case this is related to a paper, please attach a link.
 5. Attach any additional information (drawings, screenshots, etc.) you think may help.
@@ -70,22 +67,19 @@ post it.
 
 ## Adding new policies, datasets or environments
 
-Look at our implementations for [datasets](./src/lerobot/datasets/), [policies](./src/lerobot/policies/),
+Look at our implementations for [datasets](./lerobot/common/datasets/), [policies](./lerobot/common/policies/),
 environments ([aloha](https://github.com/huggingface/gym-aloha),
 [xarm](https://github.com/huggingface/gym-xarm),
 [pusht](https://github.com/huggingface/gym-pusht))
 and follow the same api design.
 
 When implementing a new dataset loadable with LeRobotDataset follow these steps:
-
 - Update `available_datasets_per_env` in `lerobot/__init__.py`
 
 When implementing a new environment (e.g. `gym_aloha`), follow these steps:
-
 - Update `available_tasks_per_env` and `available_datasets_per_env` in `lerobot/__init__.py`
 
 When implementing a new policy class (e.g. `DiffusionPolicy`) follow these steps:
-
 - Update `available_policies` and `available_policies_per_env`, in `lerobot/__init__.py`
 - Set the required `name` class attribute.
 - Update variables in `tests/test_available.py` by importing your new Policy class
@@ -139,13 +133,11 @@ Follow these steps to start contributing:
    Follow the instructions to [install poetry](https://python-poetry.org/docs/#installation) (use a version >=2.1.0) or to [install uv](https://docs.astral.sh/uv/getting-started/installation/#installation-methods) if you don't have one of them already.
 
    Set up a development environment with conda or miniconda:
-
    ```bash
    conda create -y -n lerobot-dev python=3.10 && conda activate lerobot-dev
    ```
 
    If you're using `uv`, it can manage python versions so you can instead do:
-
    ```bash
    uv venv --python 3.10 && source .venv/bin/activate
    ```
@@ -153,13 +145,11 @@ Follow these steps to start contributing:
    To develop on 🤗 LeRobot, you will at least need to install the `dev` and `test` extras dependencies along with the core library:
 
    using `poetry`
-
    ```bash
    poetry sync --extras "dev test"
    ```
 
    using `uv`
-
    ```bash
    uv sync --extra dev --extra test
    ```
@@ -167,48 +157,43 @@ Follow these steps to start contributing:
    You can also install the project with all its dependencies (including environments):
 
    using `poetry`
-
    ```bash
    poetry sync --all-extras
    ```
 
    using `uv`
-
    ```bash
    uv sync --all-extras
    ```
 
-   > **Note:** If you don't install simulation environments with `--all-extras`, the tests that require them will be skipped when running the pytest suite locally. However, they _will_ be tested in the CI. In general, we advise you to install everything and test locally before pushing.
+   > **Note:** If you don't install simulation environments with `--all-extras`, the tests that require them will be skipped when running the pytest suite locally. However, they *will* be tested in the CI. In general, we advise you to install everything and test locally before pushing.
 
    Whichever command you chose to install the project (e.g. `poetry sync --all-extras`), you should run it again when pulling code with an updated version of `pyproject.toml` and `poetry.lock` in order to synchronize your virtual environment with the new dependencies.
 
    The equivalent of `pip install some-package`, would just be:
 
    using `poetry`
-
    ```bash
    poetry add some-package
    ```
 
    using `uv`
-
    ```bash
    uv add some-package
    ```
 
    When making changes to the poetry sections of the `pyproject.toml`, you should run the following command to lock dependencies.
    using `poetry`
-
    ```bash
    poetry lock
    ```
 
    using `uv`
-
    ```bash
    uv lock
    ```
 
+
 5. Develop the features on your branch.
 
    As you work on the features, you should make sure that the test suite
@@ -226,13 +211,11 @@ Follow these steps to start contributing:
    automatically as Git commit hooks.
 
    Install `pre-commit` hooks:
-
    ```bash
    pre-commit install
    ```
 
    You can run these hooks whenever you need on staged files with:
-
    ```bash
    pre-commit
    ```
@@ -246,7 +229,6 @@ Follow these steps to start contributing:
    ```
 
    Note, if you already committed some changes that have a wrong formatting, you can use:
-
    ```bash
    pre-commit run --all-files
    ```
@@ -267,15 +249,16 @@ Follow these steps to start contributing:
    git push -u origin a-descriptive-name-for-my-changes
    ```
 
-7. Once you are satisfied (**and the checklist below is happy too**), go to the
+6. Once you are satisfied (**and the checklist below is happy too**), go to the
    webpage of your fork on GitHub. Click on 'Pull request' to send your changes
    to the project maintainers for review.
 
-8. It's ok if maintainers ask you for changes. It happens to core contributors
+7. It's ok if maintainers ask you for changes. It happens to core contributors
    too! So everyone can see the changes in the Pull request, work in your local
    branch and push the changes to your fork. They will automatically appear in
    the pull request.
 
+
 ### Checklist
 
 1. The title of your pull request should be a summary of its contribution;
@@ -286,6 +269,9 @@ Follow these steps to start contributing:
    the PR as a draft PR. These are useful to avoid duplicated work, and to differentiate
    it from PRs ready to be merged;
 4. Make sure existing tests pass;
+<!-- 5. Add high-coverage tests. No quality testing = no merge.
+
+See an example of a good PR here: https://github.com/huggingface/lerobot/pull/ -->
 
 ### Tests
 
@@ -294,21 +280,18 @@ An extensive test suite is included to test the library behavior and several exa
 Install [git lfs](https://git-lfs.com/) to retrieve test artifacts (if you don't have it already).
 
 On Mac:
-
 ```bash
 brew install git-lfs
 git lfs install
 ```
 
 On Ubuntu:
-
 ```bash
 sudo apt-get install git-lfs
 git lfs install
 ```
 
 Pull artifacts if they're not in [tests/artifacts](tests/artifacts)
-
 ```bash
 git lfs pull
 ```
@@ -320,5 +303,6 @@ repository, here's how to run tests with `pytest` for the library:
 python -m pytest -sv ./tests
 ```
 
+
 You can specify a smaller set of tests in order to test only the feature
 you're working on.

MANIFEST.in

@@ -1,2 +0,0 @@
-include src/lerobot/templates/lerobot_modelcard_template.md
-include src/lerobot/datasets/card_template.md

Makefile

@@ -26,11 +26,11 @@ export PATH := $(dir $(PYTHON_PATH)):$(PATH)
 
 DEVICE ?= cpu
 
-build-user:
-	docker build -f docker/Dockerfile.user -t lerobot-user .
+build-cpu:
+	docker build -t lerobot:latest -f docker/lerobot-cpu/Dockerfile .
 
-build-internal:
-	docker build -f docker/Dockerfile.internal -t lerobot-internal .
+build-gpu:
+	docker build -t lerobot:latest -f docker/lerobot-gpu/Dockerfile .
 
 test-end-to-end:
 	${MAKE} DEVICE=$(DEVICE) test-act-ete-train
@@ -40,17 +40,14 @@ test-end-to-end:
 	${MAKE} DEVICE=$(DEVICE) test-diffusion-ete-eval
 	${MAKE} DEVICE=$(DEVICE) test-tdmpc-ete-train
 	${MAKE} DEVICE=$(DEVICE) test-tdmpc-ete-eval
-	${MAKE} DEVICE=$(DEVICE) test-smolvla-ete-train
-	${MAKE} DEVICE=$(DEVICE) test-smolvla-ete-eval
 
 test-act-ete-train:
-	lerobot-train \
+	python lerobot/scripts/train.py \
 		--policy.type=act \
 		--policy.dim_model=64 \
 		--policy.n_action_steps=20 \
 		--policy.chunk_size=20 \
 		--policy.device=$(DEVICE) \
-		--policy.push_to_hub=false \
 		--env.type=aloha \
 		--env.episode_length=5 \
 		--dataset.repo_id=lerobot/aloha_sim_transfer_cube_human \
@@ -68,12 +65,12 @@ test-act-ete-train:
 		--output_dir=tests/outputs/act/
 
 test-act-ete-train-resume:
-	lerobot-train \
+	python lerobot/scripts/train.py \
 		--config_path=tests/outputs/act/checkpoints/000002/pretrained_model/train_config.json \
 		--resume=true
 
 test-act-ete-eval:
-	lerobot-eval \
+	python lerobot/scripts/eval.py \
 		--policy.path=tests/outputs/act/checkpoints/000004/pretrained_model \
 		--policy.device=$(DEVICE) \
 		--env.type=aloha \
@@ -82,13 +79,12 @@ test-act-ete-eval:
 		--eval.batch_size=1
 
 test-diffusion-ete-train:
-	lerobot-train \
+	python lerobot/scripts/train.py \
 		--policy.type=diffusion \
 		--policy.down_dims='[64,128,256]' \
 		--policy.diffusion_step_embed_dim=32 \
 		--policy.num_inference_steps=10 \
 		--policy.device=$(DEVICE) \
-		--policy.push_to_hub=false \
 		--env.type=pusht \
 		--env.episode_length=5 \
 		--dataset.repo_id=lerobot/pusht \
@@ -106,7 +102,7 @@ test-diffusion-ete-train:
 		--output_dir=tests/outputs/diffusion/
 
 test-diffusion-ete-eval:
-	lerobot-eval \
+	python lerobot/scripts/eval.py \
 		--policy.path=tests/outputs/diffusion/checkpoints/000002/pretrained_model \
 		--policy.device=$(DEVICE) \
 		--env.type=pusht \
@@ -115,10 +111,9 @@ test-diffusion-ete-eval:
 		--eval.batch_size=1
 
 test-tdmpc-ete-train:
-	lerobot-train \
+	python lerobot/scripts/train.py \
 		--policy.type=tdmpc \
 		--policy.device=$(DEVICE) \
-		--policy.push_to_hub=false \
 		--env.type=xarm \
 		--env.task=XarmLift-v0 \
 		--env.episode_length=5 \
@@ -137,7 +132,7 @@ test-tdmpc-ete-train:
 		--output_dir=tests/outputs/tdmpc/
 
 test-tdmpc-ete-eval:
-	lerobot-eval \
+	python lerobot/scripts/eval.py \
 		--policy.path=tests/outputs/tdmpc/checkpoints/000002/pretrained_model \
 		--policy.device=$(DEVICE) \
 		--env.type=xarm \
@@ -145,36 +140,3 @@ test-tdmpc-ete-eval:
 		--env.task=XarmLift-v0 \
 		--eval.n_episodes=1 \
 		--eval.batch_size=1
-
-
-test-smolvla-ete-train:
-	lerobot-train \
-		--policy.type=smolvla \
-		--policy.n_action_steps=20 \
-		--policy.chunk_size=20 \
-		--policy.device=$(DEVICE) \
-		--policy.push_to_hub=false \
-		--env.type=aloha \
-		--env.episode_length=5 \
-		--dataset.repo_id=lerobot/aloha_sim_transfer_cube_human \
-		--dataset.image_transforms.enable=true \
-		--dataset.episodes="[0]" \
-		--batch_size=2 \
-		--steps=4 \
-		--eval_freq=2 \
-		--eval.n_episodes=1 \
-		--eval.batch_size=1 \
-		--save_freq=2 \
-		--save_checkpoint=true \
-		--log_freq=1 \
-		--wandb.enable=false \
-		--output_dir=tests/outputs/smolvla/
-
-test-smolvla-ete-eval:
-	lerobot-eval \
-		--policy.path=tests/outputs/smolvla/checkpoints/000004/pretrained_model \
-		--policy.device=$(DEVICE) \
-		--env.type=aloha \
-		--env.episode_length=5 \
-		--eval.n_episodes=1 \
-		--eval.batch_size=1

README.md

@@ -1,70 +1,60 @@
 <p align="center">
-  <img alt="LeRobot, Hugging Face Robotics Library" src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/lerobot-logo-thumbnail.png" width="100%">
+  <picture>
+    <source media="(prefers-color-scheme: dark)" srcset="media/lerobot-logo-thumbnail.png">
+    <source media="(prefers-color-scheme: light)" srcset="media/lerobot-logo-thumbnail.png">
+    <img alt="LeRobot, Hugging Face Robotics Library" src="media/lerobot-logo-thumbnail.png" style="max-width: 100%;">
+  </picture>
   <br/>
   <br/>
 </p>
 
 <div align="center">
 
-[![Tests](https://github.com/huggingface/lerobot/actions/workflows/nightly.yml/badge.svg?branch=main)](https://github.com/huggingface/lerobot/actions/workflows/nightly.yml?query=branch%3Amain)
+[![Tests](https://github.com/huggingface/lerobot/actions/workflows/nightly-tests.yml/badge.svg?branch=main)](https://github.com/huggingface/lerobot/actions/workflows/nightly-tests.yml?query=branch%3Amain)
+[![Coverage](https://codecov.io/gh/huggingface/lerobot/branch/main/graph/badge.svg?token=TODO)](https://codecov.io/gh/huggingface/lerobot)
 [![Python versions](https://img.shields.io/pypi/pyversions/lerobot)](https://www.python.org/downloads/)
 [![License](https://img.shields.io/badge/License-Apache%202.0-blue.svg)](https://github.com/huggingface/lerobot/blob/main/LICENSE)
 [![Status](https://img.shields.io/pypi/status/lerobot)](https://pypi.org/project/lerobot/)
 [![Version](https://img.shields.io/pypi/v/lerobot)](https://pypi.org/project/lerobot/)
-[![Contributor Covenant](https://img.shields.io/badge/Contributor%20Covenant-v2.1-ff69b4.svg)](https://github.com/huggingface/lerobot/blob/main/CODE_OF_CONDUCT.md)
+[![Examples](https://img.shields.io/badge/Examples-green.svg)](https://github.com/huggingface/lerobot/tree/main/examples)
+[![Contributor Covenant](https://img.shields.io/badge/Contributor%20Covenant-v2.1%20adopted-ff69b4.svg)](https://github.com/huggingface/lerobot/blob/main/CODE_OF_CONDUCT.md)
 [![Discord](https://dcbadge.vercel.app/api/server/C5P34WJ68S?style=flat)](https://discord.gg/s3KuuzsPFb)
 
-<!-- [![Coverage](https://codecov.io/gh/huggingface/lerobot/branch/main/graph/badge.svg?token=TODO)](https://codecov.io/gh/huggingface/lerobot) -->
-
 </div>
 
 <h2 align="center">
-    <p><a href="https://huggingface.co/docs/lerobot/hope_jr">
-        Build Your Own HopeJR Robot!</a></p>
-</h2>
-
-<div align="center">
-  <img
-    src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/hope_jr/hopejr.png"
-    alt="HopeJR robot"
-    title="HopeJR robot"
-    width="60%"
-  />
-
-  <p><strong>Meet HopeJR – A humanoid robot arm and hand for dexterous manipulation!</strong></p>
-  <p>Control it with exoskeletons and gloves for precise hand movements.</p>
-  <p>Perfect for advanced manipulation tasks! 🤖</p>
-
-  <p><a href="https://huggingface.co/docs/lerobot/hope_jr">
-      See the full HopeJR tutorial here.</a></p>
-</div>
-
-<br/>
-
-<h2 align="center">
-    <p><a href="https://huggingface.co/docs/lerobot/so101">
+    <p><a href="https://github.com/huggingface/lerobot/blob/main/examples/12_use_so101.md">
         Build Your Own SO-101 Robot!</a></p>
 </h2>
 
 <div align="center">
-  <table>
-    <tr>
-      <td align="center"><img src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/so101/so101.webp" alt="SO-101 follower arm" title="SO-101 follower arm" width="90%"/></td>
-      <td align="center"><img src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/so101/so101-leader.webp" alt="SO-101 leader arm" title="SO-101 leader arm" width="90%"/></td>
-    </tr>
-  </table>
+  <div style="display: flex; gap: 1rem; justify-content: center; align-items: center;" >
+    <img
+      src="media/so101/so101.webp?raw=true"
+      alt="SO-101 follower arm"
+      title="SO-101 follower arm"
+      style="width: 40%;"
+    />
+    <img
+      src="media/so101/so101-leader.webp?raw=true"
+      alt="SO-101 leader arm"
+      title="SO-101 leader arm"
+      style="width: 40%;"
+    />
+  </div>
+
 
   <p><strong>Meet the updated SO100, the SO-101 – Just €114 per arm!</strong></p>
   <p>Train it in minutes with a few simple moves on your laptop.</p>
   <p>Then sit back and watch your creation act autonomously! 🤯</p>
 
-  <p><a href="https://huggingface.co/docs/lerobot/so101">
+  <p><a href="https://github.com/huggingface/lerobot/blob/main/examples/12_use_so101.md">
       See the full SO-101 tutorial here.</a></p>
 
   <p>Want to take it to the next level? Make your SO-101 mobile by building LeKiwi!</p>
-  <p>Check out the <a href="https://huggingface.co/docs/lerobot/lekiwi">LeKiwi tutorial</a> and bring your robot to life on wheels.</p>
+  <p>Check out the <a href="https://github.com/huggingface/lerobot/blob/main/examples/11_use_lekiwi.md">LeKiwi tutorial</a> and bring your robot to life on wheels.</p>
 
-  <img src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/lekiwi/kiwi.webp" alt="LeKiwi mobile robot" title="LeKiwi mobile robot" width="50%">
+  <img src="media/lekiwi/kiwi.webp?raw=true" alt="LeKiwi mobile robot" title="LeKiwi mobile robot" width="50%">
 </div>
 
 <br/>
@@ -87,9 +77,9 @@
 
 <table>
   <tr>
-    <td><img src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/gym/aloha_act.gif" width="100%" alt="ACT policy on ALOHA env"/></td>
-    <td><img src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/gym/simxarm_tdmpc.gif" width="100%" alt="TDMPC policy on SimXArm env"/></td>
-    <td><img src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/gym/pusht_diffusion.gif" width="100%" alt="Diffusion policy on PushT env"/></td>
+    <td><img src="media/gym/aloha_act.gif" width="100%" alt="ACT policy on ALOHA env"/></td>
+    <td><img src="media/gym/simxarm_tdmpc.gif" width="100%" alt="TDMPC policy on SimXArm env"/></td>
+    <td><img src="media/gym/pusht_diffusion.gif" width="100%" alt="Diffusion policy on PushT env"/></td>
   </tr>
   <tr>
     <td align="center">ACT policy on ALOHA env</td>
@@ -98,136 +88,123 @@
   </tr>
 </table>
 
+### Acknowledgment
+
+- Thanks to Tony Zhao, Zipeng Fu and colleagues for open sourcing ACT policy, ALOHA environments and datasets. Ours are adapted from [ALOHA](https://tonyzhaozh.github.io/aloha) and [Mobile ALOHA](https://mobile-aloha.github.io).
+- Thanks to Cheng Chi, Zhenjia Xu and colleagues for open sourcing Diffusion policy, Pusht environment and datasets, as well as UMI datasets. Ours are adapted from [Diffusion Policy](https://diffusion-policy.cs.columbia.edu) and [UMI Gripper](https://umi-gripper.github.io).
+- Thanks to Nicklas Hansen, Yunhai Feng and colleagues for open sourcing TDMPC policy, Simxarm environments and datasets. Ours are adapted from [TDMPC](https://github.com/nicklashansen/tdmpc) and [FOWM](https://www.yunhaifeng.com/FOWM).
+- Thanks to Antonio Loquercio and Ashish Kumar for their early support.
+- Thanks to [Seungjae (Jay) Lee](https://sjlee.cc/), [Mahi Shafiullah](https://mahis.life/) and colleagues for open sourcing [VQ-BeT](https://sjlee.cc/vq-bet/) policy and helping us adapt the codebase to our repository. The policy is adapted from [VQ-BeT repo](https://github.com/jayLEE0301/vq_bet_official).
+
+
 ## Installation
 
-LeRobot works with Python 3.10+ and PyTorch 2.2+.
-
-### Environment Setup
+Download our source code:
+```bash
+git clone https://github.com/huggingface/lerobot.git
+cd lerobot
+```
 
 Create a virtual environment with Python 3.10 and activate it, e.g. with [`miniconda`](https://docs.anaconda.com/free/miniconda/index.html):
-
 ```bash
 conda create -y -n lerobot python=3.10
 conda activate lerobot
 ```
 
 When using `miniconda`, install `ffmpeg` in your environment:
-
 ```bash
 conda install ffmpeg -c conda-forge
 ```
 
 > **NOTE:** This usually installs `ffmpeg 7.X` for your platform compiled with the `libsvtav1` encoder. If `libsvtav1` is not supported (check supported encoders with `ffmpeg -encoders`), you can:
->
-> - _[On any platform]_ Explicitly install `ffmpeg 7.X` using:
->
-> ```bash
-> conda install ffmpeg=7.1.1 -c conda-forge
-> ```
->
-> - _[On Linux only]_ Install [ffmpeg build dependencies](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#GettheDependencies) and [compile ffmpeg from source with libsvtav1](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#libsvtav1), and make sure you use the corresponding ffmpeg binary to your install with `which ffmpeg`.
-
-### Install LeRobot 🤗
-
-#### From Source
-
-First, clone the repository and navigate into the directory:
-
-```bash
-git clone https://github.com/huggingface/lerobot.git
-cd lerobot
-```
-
-Then, install the library in editable mode. This is useful if you plan to contribute to the code.
+>  - _[On any platform]_ Explicitly install `ffmpeg 7.X` using:
+>  ```bash
+>  conda install ffmpeg=7.1.1 -c conda-forge
+>  ```
+>  - _[On Linux only]_ Install [ffmpeg build dependencies](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#GettheDependencies) and [compile ffmpeg from source with libsvtav1](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#libsvtav1), and make sure you use the corresponding ffmpeg binary to your install with `which ffmpeg`.
 
+Install 🤗 LeRobot:
 ```bash
 pip install -e .
 ```
 
 > **NOTE:** If you encounter build errors, you may need to install additional dependencies (`cmake`, `build-essential`, and `ffmpeg libs`). On Linux, run:
-> `sudo apt-get install cmake build-essential python3-dev pkg-config libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libswresample-dev libavfilter-dev`. For other systems, see: [Compiling PyAV](https://pyav.org/docs/develop/overview/installation.html#bring-your-own-ffmpeg)
+`sudo apt-get install cmake build-essential python3-dev pkg-config libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libswresample-dev libavfilter-dev pkg-config`. For other systems, see: [Compiling PyAV](https://pyav.org/docs/develop/overview/installation.html#bring-your-own-ffmpeg)
 
 For simulations, 🤗 LeRobot comes with gymnasium environments that can be installed as extras:
-
 - [aloha](https://github.com/huggingface/gym-aloha)
 - [xarm](https://github.com/huggingface/gym-xarm)
 - [pusht](https://github.com/huggingface/gym-pusht)
 
 For instance, to install 🤗 LeRobot with aloha and pusht, use:
-
 ```bash
 pip install -e ".[aloha, pusht]"
 ```
 
-### Installation from PyPI
-
-**Core Library:**
-Install the base package with:
-
-```bash
-pip install lerobot
-```
-
-_This installs only the default dependencies._
-
-**Extra Features:**
-To install additional functionality, use one of the following:
-
-```bash
-pip install 'lerobot[all]'          # All available features
-pip install 'lerobot[aloha,pusht]'  # Specific features (Aloha & Pusht)
-pip install 'lerobot[feetech]'      # Feetech motor support
-```
-
-_Replace `[...]` with your desired features._
-
-**Available Tags:**
-For a full list of optional dependencies, see:
-https://pypi.org/project/lerobot/
-
-### Weights & Biases
-
 To use [Weights and Biases](https://docs.wandb.ai/quickstart) for experiment tracking, log in with
-
 ```bash
 wandb login
 ```
 
 (note: you will also need to enable WandB in the configuration. See below.)
 
+## Walkthrough
+
+```
+.
+├── examples             # contains demonstration examples, start here to learn about LeRobot
+|   └── advanced         # contains even more examples for those who have mastered the basics
+├── lerobot
+|   ├── configs          # contains config classes with all options that you can override in the command line
+|   ├── common           # contains classes and utilities
+|   |   ├── datasets       # various datasets of human demonstrations: aloha, pusht, xarm
+|   |   ├── envs           # various sim environments: aloha, pusht, xarm
+|   |   ├── policies       # various policies: act, diffusion, tdmpc
+|   |   ├── robot_devices  # various real devices: dynamixel motors, opencv cameras, koch robots
+|   |   └── utils          # various utilities
+|   └── scripts          # contains functions to execute via command line
+|       ├── eval.py                 # load policy and evaluate it on an environment
+|       ├── train.py                # train a policy via imitation learning and/or reinforcement learning
+|       ├── control_robot.py        # teleoperate a real robot, record data, run a policy
+|       ├── push_dataset_to_hub.py  # convert your dataset into LeRobot dataset format and upload it to the Hugging Face hub
+|       └── visualize_dataset.py    # load a dataset and render its demonstrations
+├── outputs               # contains results of scripts execution: logs, videos, model checkpoints
+└── tests                 # contains pytest utilities for continuous integration
+```
+
 ### Visualize datasets
 
-Check out [example 1](https://github.com/huggingface/lerobot/blob/main/examples/1_load_lerobot_dataset.py) that illustrates how to use our dataset class which automatically downloads data from the Hugging Face hub.
+Check out [example 1](./examples/1_load_lerobot_dataset.py) that illustrates how to use our dataset class which automatically downloads data from the Hugging Face hub.
 
 You can also locally visualize episodes from a dataset on the hub by executing our script from the command line:
-
 ```bash
-python -m lerobot.scripts.visualize_dataset \
+python lerobot/scripts/visualize_dataset.py \
     --repo-id lerobot/pusht \
     --episode-index 0
 ```
 
 or from a dataset in a local folder with the `root` option and the `--local-files-only` (in the following case the dataset will be searched for in `./my_local_data_dir/lerobot/pusht`)
-
 ```bash
-python -m lerobot.scripts.visualize_dataset \
+python lerobot/scripts/visualize_dataset.py \
     --repo-id lerobot/pusht \
     --root ./my_local_data_dir \
     --local-files-only 1 \
     --episode-index 0
 ```
 
+
 It will open `rerun.io` and display the camera streams, robot states and actions, like this:
 
 https://github-production-user-asset-6210df.s3.amazonaws.com/4681518/328035972-fd46b787-b532-47e2-bb6f-fd536a55a7ed.mov?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAVCODYLSA53PQK4ZA%2F20240505%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20240505T172924Z&X-Amz-Expires=300&X-Amz-Signature=d680b26c532eeaf80740f08af3320d22ad0b8a4e4da1bcc4f33142c15b509eda&X-Amz-SignedHeaders=host&actor_id=24889239&key_id=0&repo_id=748713144
 
-Our script can also visualize datasets stored on a distant server. See `python -m lerobot.scripts.visualize_dataset --help` for more instructions.
+
+Our script can also visualize datasets stored on a distant server. See `python lerobot/scripts/visualize_dataset.py --help` for more instructions.
 
 ### The `LeRobotDataset` format
 
 A dataset in `LeRobotDataset` format is very simple to use. It can be loaded from a repository on the Hugging Face hub or a local folder simply with e.g. `dataset = LeRobotDataset("lerobot/aloha_static_coffee")` and can be indexed into like any Hugging Face and PyTorch dataset. For instance `dataset[0]` will retrieve a single temporal frame from the dataset containing observation(s) and an action as PyTorch tensors ready to be fed to a model.
 
-A specificity of `LeRobotDataset` is that, rather than retrieving a single frame by its index, we can retrieve several frames based on their temporal relationship with the indexed frame, by setting `delta_timestamps` to a list of relative times with respect to the indexed frame. For example, with `delta_timestamps = {"observation.image": [-1, -0.5, -0.2, 0]}` one can retrieve, for a given index, 4 frames: 3 "previous" frames 1 second, 0.5 seconds, and 0.2 seconds before the indexed frame, and the indexed frame itself (corresponding to the 0 entry). See example [1_load_lerobot_dataset.py](https://github.com/huggingface/lerobot/blob/main/examples/1_load_lerobot_dataset.py) for more details on `delta_timestamps`.
+A specificity of `LeRobotDataset` is that, rather than retrieving a single frame by its index, we can retrieve several frames based on their temporal relationship with the indexed frame, by setting `delta_timestamps` to a list of relative times with respect to the indexed frame. For example, with `delta_timestamps = {"observation.image": [-1, -0.5, -0.2, 0]}`  one can retrieve, for a given index, 4 frames: 3 "previous" frames 1 second, 0.5 seconds, and 0.2 seconds before the indexed frame, and the indexed frame itself (corresponding to the 0 entry). See example [1_load_lerobot_dataset.py](examples/1_load_lerobot_dataset.py) for more details on `delta_timestamps`.
 
 Under the hood, the `LeRobotDataset` format makes use of several ways to serialize data which can be useful to understand if you plan to work more closely with this format. We tried to make a flexible yet simple dataset format that would cover most type of features and specificities present in reinforcement learning and robotics, in simulation and in real-world, with a focus on cameras and robot states but easily extended to other types of sensory inputs as long as they can be represented by a tensor.
 
@@ -262,7 +239,6 @@ dataset attributes:
 ```
 
 A `LeRobotDataset` is serialised using several widespread file formats for each of its parts, namely:
-
 - hf_dataset stored using Hugging Face datasets library serialization to parquet
 - videos are stored in mp4 format to save space
 - metadata are stored in plain json/jsonl files
@@ -271,12 +247,11 @@ Dataset can be uploaded/downloaded from the HuggingFace hub seamlessly. To work
 
 ### Evaluate a pretrained policy
 
-Check out [example 2](https://github.com/huggingface/lerobot/blob/main/examples/2_evaluate_pretrained_policy.py) that illustrates how to download a pretrained policy from Hugging Face hub, and run an evaluation on its corresponding environment.
+Check out [example 2](./examples/2_evaluate_pretrained_policy.py) that illustrates how to download a pretrained policy from Hugging Face hub, and run an evaluation on its corresponding environment.
 
 We also provide a more capable script to parallelize the evaluation over multiple environments during the same rollout. Here is an example with a pretrained model hosted on [lerobot/diffusion_pusht](https://huggingface.co/lerobot/diffusion_pusht):
-
 ```bash
-lerobot-eval \
+python lerobot/scripts/eval.py \
     --policy.path=lerobot/diffusion_pusht \
     --env.type=pusht \
     --eval.batch_size=10 \
@@ -288,78 +263,151 @@ lerobot-eval \
 Note: After training your own policy, you can re-evaluate the checkpoints with:
 
 ```bash
-lerobot-eval --policy.path={OUTPUT_DIR}/checkpoints/last/pretrained_model
+python lerobot/scripts/eval.py --policy.path={OUTPUT_DIR}/checkpoints/last/pretrained_model
 ```
 
-See `lerobot-eval --help` for more instructions.
+See `python lerobot/scripts/eval.py --help` for more instructions.
 
 ### Train your own policy
 
-Check out [example 3](https://github.com/huggingface/lerobot/blob/main/examples/3_train_policy.py) that illustrates how to train a model using our core library in python, and [example 4](https://github.com/huggingface/lerobot/blob/main/examples/4_train_policy_with_script.md) that shows how to use our training script from command line.
+Check out [example 3](./examples/3_train_policy.py) that illustrates how to train a model using our core library in python, and [example 4](./examples/4_train_policy_with_script.md) that shows how to use our training script from command line.
 
 To use wandb for logging training and evaluation curves, make sure you've run `wandb login` as a one-time setup step. Then, when running the training command above, enable WandB in the configuration by adding `--wandb.enable=true`.
 
-A link to the wandb logs for the run will also show up in yellow in your terminal. Here is an example of what they look like in your browser. Please also check [here](https://github.com/huggingface/lerobot/blob/main/examples/4_train_policy_with_script.md#typical-logs-and-metrics) for the explanation of some commonly used metrics in logs.
+A link to the wandb logs for the run will also show up in yellow in your terminal. Here is an example of what they look like in your browser. Please also check [here](./examples/4_train_policy_with_script.md#typical-logs-and-metrics) for the explanation of some commonly used metrics in logs.
 
-\<img src="https://raw.githubusercontent.com/huggingface/lerobot/main/media/wandb.png" alt="WandB logs example"\>
+![](media/wandb.png)
 
-Note: For efficiency, during training every checkpoint is evaluated on a low number of episodes. You may use `--eval.n_episodes=500` to evaluate on more episodes than the default. Or, after training, you may want to re-evaluate your best checkpoints on more episodes or change the evaluation settings. See `lerobot-eval --help` for more instructions.
+Note: For efficiency, during training every checkpoint is evaluated on a low number of episodes. You may use `--eval.n_episodes=500` to evaluate on more episodes than the default. Or, after training, you may want to re-evaluate your best checkpoints on more episodes or change the evaluation settings. See `python lerobot/scripts/eval.py --help` for more instructions.
 
 #### Reproduce state-of-the-art (SOTA)
 
 We provide some pretrained policies on our [hub page](https://huggingface.co/lerobot) that can achieve state-of-the-art performances.
 You can reproduce their training by loading the config from their run. Simply running:
-
 ```bash
-lerobot-train --config_path=lerobot/diffusion_pusht
+python lerobot/scripts/train.py --config_path=lerobot/diffusion_pusht
 ```
-
 reproduces SOTA results for Diffusion Policy on the PushT task.
 
 ## Contribute
 
 If you would like to contribute to 🤗 LeRobot, please check out our [contribution guide](https://github.com/huggingface/lerobot/blob/main/CONTRIBUTING.md).
 
+<!-- ### Add a new dataset
+
+To add a dataset to the hub, you need to login using a write-access token, which can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens):
+```bash
+huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
+```
+
+Then point to your raw dataset folder (e.g. `data/aloha_static_pingpong_test_raw`), and push your dataset to the hub with:
+```bash
+python lerobot/scripts/push_dataset_to_hub.py \
+--raw-dir data/aloha_static_pingpong_test_raw \
+--out-dir data \
+--repo-id lerobot/aloha_static_pingpong_test \
+--raw-format aloha_hdf5
+```
+
+See `python lerobot/scripts/push_dataset_to_hub.py --help` for more instructions.
+
+If your dataset format is not supported, implement your own in `lerobot/common/datasets/push_dataset_to_hub/${raw_format}_format.py` by copying examples like [pusht_zarr](https://github.com/huggingface/lerobot/blob/main/lerobot/common/datasets/push_dataset_to_hub/pusht_zarr_format.py), [umi_zarr](https://github.com/huggingface/lerobot/blob/main/lerobot/common/datasets/push_dataset_to_hub/umi_zarr_format.py), [aloha_hdf5](https://github.com/huggingface/lerobot/blob/main/lerobot/common/datasets/push_dataset_to_hub/aloha_hdf5_format.py), or [xarm_pkl](https://github.com/huggingface/lerobot/blob/main/lerobot/common/datasets/push_dataset_to_hub/xarm_pkl_format.py). -->
+
+
 ### Add a pretrained policy
 
 Once you have trained a policy you may upload it to the Hugging Face hub using a hub id that looks like `${hf_user}/${repo_name}` (e.g. [lerobot/diffusion_pusht](https://huggingface.co/lerobot/diffusion_pusht)).
 
 You first need to find the checkpoint folder located inside your experiment directory (e.g. `outputs/train/2024-05-05/20-21-12_aloha_act_default/checkpoints/002500`). Within that there is a `pretrained_model` directory which should contain:
-
 - `config.json`: A serialized version of the policy configuration (following the policy's dataclass config).
 - `model.safetensors`: A set of `torch.nn.Module` parameters, saved in [Hugging Face Safetensors](https://huggingface.co/docs/safetensors/index) format.
 - `train_config.json`: A consolidated configuration containing all parameters used for training. The policy configuration should match `config.json` exactly. This is useful for anyone who wants to evaluate your policy or for reproducibility.
 
 To upload these to the hub, run the following:
-
 ```bash
 huggingface-cli upload ${hf_user}/${repo_name} path/to/pretrained_model
 ```
 
-See [eval.py](https://github.com/huggingface/lerobot/blob/main/src/lerobot/scripts/eval.py) for an example of how other people may use your policy.
+See [eval.py](https://github.com/huggingface/lerobot/blob/main/lerobot/scripts/eval.py) for an example of how other people may use your policy.
 
-### Acknowledgment
 
-- The LeRobot team 🤗 for building SmolVLA [Paper](https://arxiv.org/abs/2506.01844), [Blog](https://huggingface.co/blog/smolvla).
-- Thanks to Tony Zhao, Zipeng Fu and colleagues for open sourcing ACT policy, ALOHA environments and datasets. Ours are adapted from [ALOHA](https://tonyzhaozh.github.io/aloha) and [Mobile ALOHA](https://mobile-aloha.github.io).
-- Thanks to Cheng Chi, Zhenjia Xu and colleagues for open sourcing Diffusion policy, Pusht environment and datasets, as well as UMI datasets. Ours are adapted from [Diffusion Policy](https://diffusion-policy.cs.columbia.edu) and [UMI Gripper](https://umi-gripper.github.io).
-- Thanks to Nicklas Hansen, Yunhai Feng and colleagues for open sourcing TDMPC policy, Simxarm environments and datasets. Ours are adapted from [TDMPC](https://github.com/nicklashansen/tdmpc) and [FOWM](https://www.yunhaifeng.com/FOWM).
-- Thanks to Antonio Loquercio and Ashish Kumar for their early support.
-- Thanks to [Seungjae (Jay) Lee](https://sjlee.cc/), [Mahi Shafiullah](https://mahis.life/) and colleagues for open sourcing [VQ-BeT](https://sjlee.cc/vq-bet/) policy and helping us adapt the codebase to our repository. The policy is adapted from [VQ-BeT repo](https://github.com/jayLEE0301/vq_bet_official).
+### Improve your code with profiling
+
+An example of a code snippet to profile the evaluation of a policy:
+```python
+from torch.profiler import profile, record_function, ProfilerActivity
+
+def trace_handler(prof):
+    prof.export_chrome_trace(f"tmp/trace_schedule_{prof.step_num}.json")
+
+with profile(
+    activities=[ProfilerActivity.CPU, ProfilerActivity.CUDA],
+    schedule=torch.profiler.schedule(
+        wait=2,
+        warmup=2,
+        active=3,
+    ),
+    on_trace_ready=trace_handler
+) as prof:
+    with record_function("eval_policy"):
+        for i in range(num_episodes):
+            prof.step()
+            # insert code to profile, potentially whole body of eval_policy function
+```
 
 ## Citation
 
 If you want, you can cite this work with:
-
 ```bibtex
 @misc{cadene2024lerobot,
-    author = {Cadene, Remi and Alibert, Simon and Soare, Alexander and Gallouedec, Quentin and Zouitine, Adil and Palma, Steven and Kooijmans, Pepijn and Aractingi, Michel and Shukor, Mustafa and Aubakirova, Dana and Russi, Martino and Capuano, Francesco and Pascal, Caroline and Choghari, Jade and Moss, Jess and Wolf, Thomas},
+    author = {Cadene, Remi and Alibert, Simon and Soare, Alexander and Gallouedec, Quentin and Zouitine, Adil and Wolf, Thomas},
     title = {LeRobot: State-of-the-art Machine Learning for Real-World Robotics in Pytorch},
     howpublished = "\url{https://github.com/huggingface/lerobot}",
     year = {2024}
 }
 ```
 
+Additionally, if you are using any of the particular policy architecture, pretrained models, or datasets, it is recommended to cite the original authors of the work as they appear below:
+
+- [Diffusion Policy](https://diffusion-policy.cs.columbia.edu)
+```bibtex
+@article{chi2024diffusionpolicy,
+	author = {Cheng Chi and Zhenjia Xu and Siyuan Feng and Eric Cousineau and Yilun Du and Benjamin Burchfiel and Russ Tedrake and Shuran Song},
+	title ={Diffusion Policy: Visuomotor Policy Learning via Action Diffusion},
+	journal = {The International Journal of Robotics Research},
+	year = {2024},
+}
+```
+- [ACT or ALOHA](https://tonyzhaozh.github.io/aloha)
+```bibtex
+@article{zhao2023learning,
+  title={Learning fine-grained bimanual manipulation with low-cost hardware},
+  author={Zhao, Tony Z and Kumar, Vikash and Levine, Sergey and Finn, Chelsea},
+  journal={arXiv preprint arXiv:2304.13705},
+  year={2023}
+}
+```
+
+- [TDMPC](https://www.nicklashansen.com/td-mpc/)
+
+```bibtex
+@inproceedings{Hansen2022tdmpc,
+	title={Temporal Difference Learning for Model Predictive Control},
+	author={Nicklas Hansen and Xiaolong Wang and Hao Su},
+	booktitle={ICML},
+	year={2022}
+}
+```
+
+- [VQ-BeT](https://sjlee.cc/vq-bet/)
+```bibtex
+@article{lee2024behavior,
+  title={Behavior generation with latent actions},
+  author={Lee, Seungjae and Wang, Yibin and Etukuru, Haritheja and Kim, H Jin and Shafiullah, Nur Muhammad Mahi and Pinto, Lerrel},
+  journal={arXiv preprint arXiv:2403.03181},
+  year={2024}
+}
+```
 ## Star History
 
 [![Star History Chart](https://api.star-history.com/svg?repos=huggingface/lerobot&type=Timeline)](https://star-history.com/#huggingface/lerobot&Timeline)

benchmarks/video/README.md

@@ -1,32 +1,28 @@
 # Video benchmark
 
+
 ## Questions
-
 What is the optimal trade-off between:
-
 - maximizing loading time with random access,
 - minimizing memory space on disk,
 - maximizing success rate of policies,
 - compatibility across devices/platforms for decoding videos (e.g. video players, web browsers).
 
 How to encode videos?
-
 - Which video codec (`-vcodec`) to use? h264, h265, AV1?
 - What pixel format to use (`-pix_fmt`)? `yuv444p` or `yuv420p`?
 - How much compression (`-crf`)? No compression with `0`, intermediate compression with `25` or extreme with `50+`?
 - Which frequency to chose for key frames (`-g`)? A key frame every `10` frames?
 
 How to decode videos?
-
 - Which `decoder`? `torchvision`, `torchaudio`, `ffmpegio`, `decord`, or `nvc`?
 - What scenarios to use for the requesting timestamps during benchmark? (`timestamps_mode`)
 
-## Variables
 
+## Variables
 **Image content & size**
 We don't expect the same optimal settings for a dataset of images from a simulation, or from real-world in an apartment, or in a factory, or outdoor, or with lots of moving objects in the scene, etc. Similarly, loading times might not vary linearly with the image size (resolution).
 For these reasons, we run this benchmark on four representative datasets:
-
 - `lerobot/pusht_image`: (96 x 96 pixels) simulation with simple geometric shapes, fixed camera.
 - `aliberts/aloha_mobile_shrimp_image`: (480 x 640 pixels) real-world indoor, moving camera.
 - `aliberts/paris_street`: (720 x 1280 pixels) real-world outdoor, moving camera.
@@ -38,9 +34,8 @@ Note: The datasets used for this benchmark need to be image datasets, not video
 We might revisit this benchmark and find better settings if we train our policies with various data augmentations to make them more robust (e.g. robust to color changes, compression, etc.).
 
 ### Encoding parameters
-
 | parameter   | values                                                       |
-| ----------- | ------------------------------------------------------------ |
+|-------------|--------------------------------------------------------------|
 | **vcodec**  | `libx264`, `libx265`, `libsvtav1`                            |
 | **pix_fmt** | `yuv444p`, `yuv420p`                                         |
 | **g**       | `1`, `2`, `3`, `4`, `5`, `6`, `10`, `15`, `20`, `40`, `None` |
@@ -49,23 +44,19 @@ We might revisit this benchmark and find better settings if we train our policie
 Note that `crf` value might be interpreted differently by various video codecs. In other words, the same value used with one codec doesn't necessarily translate into the same compression level with another codec. In fact, the default value (`None`) isn't the same amongst the different video codecs. Importantly, it is also the case for many other ffmpeg arguments like `g` which specifies the frequency of the key frames.
 
 For a comprehensive list and documentation of these parameters, see the ffmpeg documentation depending on the video codec used:
-
 - h264: https://trac.ffmpeg.org/wiki/Encode/H.264
 - h265: https://trac.ffmpeg.org/wiki/Encode/H.265
 - AV1: https://trac.ffmpeg.org/wiki/Encode/AV1
 
 ### Decoding parameters
-
 **Decoder**
 We tested two video decoding backends from torchvision:
-
 - `pyav`
 - `video_reader` (requires to build torchvision from source)
 
 **Requested timestamps**
 Given the way video decoding works, once a keyframe has been loaded, the decoding of subsequent frames is fast.
 This of course is affected by the `-g` parameter during encoding, which specifies the frequency of the keyframes. Given our typical use cases in robotics policies which might request a few timestamps in different random places, we want to replicate these use cases with the following scenarios:
-
 - `1_frame`: 1 frame,
 - `2_frames`: 2 consecutive frames (e.g. `[t, t + 1 / fps]`),
 - `6_frames`: 6 consecutive frames (e.g. `[t + i / fps for i in range(6)]`)
@@ -73,13 +64,12 @@ This of course is affected by the `-g` parameter during encoding, which specifie
 Note that this differs significantly from a typical use case like watching a movie, in which every frame is loaded sequentially from the beginning to the end and it's acceptable to have big values for `-g`.
 
 Additionally, because some policies might request single timestamps that are a few frames apart, we also have the following scenario:
-
 - `2_frames_4_space`: 2 frames with 4 consecutive frames of spacing in between (e.g `[t, t + 5 / fps]`),
 
 However, due to how video decoding is implemented with `pyav`, we don't have access to an accurate seek so in practice this scenario is essentially the same as `6_frames` since all 6 frames between `t` and `t + 5 / fps` will be decoded.
 
-## Metrics
 
+## Metrics
 **Data compression ratio (lower is better)**
 `video_images_size_ratio` is the ratio of the memory space on disk taken by the encoded video over the memory space taken by the original images. For instance, `video_images_size_ratio=25%` means that the video takes 4 times less memory space on disk compared to the original images.
 
@@ -97,18 +87,18 @@ However, due to how video decoding is implemented with `pyav`, we don't have acc
 
 One aspect that can't be measured here with those metrics is the compatibility of the encoding across platforms, in particular on web browser, for visualization purposes.
 h264, h265 and AV1 are all commonly used codecs and should not pose an issue. However, the chroma subsampling (`pix_fmt`) format might affect compatibility:
-
 - `yuv420p` is more widely supported across various platforms, including web browsers.
 - `yuv444p` offers higher color fidelity but might not be supported as broadly.
 
+
 <!-- **Loss of a pretrained policy (higher is better)** (not available)
 `loss_pretrained` is the result of evaluating with the selected encoding/decoding settings a policy pretrained on original images. It is easier to understand than `avg_l2_error`.
 
 **Success rate after retraining (higher is better)** (not available)
 `success_rate` is the result of training and evaluating a policy with the selected encoding/decoding settings. It is the most difficult metric to get but also the very best. -->
 
-## How the benchmark works
 
+## How the benchmark works
 The benchmark evaluates both encoding and decoding of video frames on the first episode of each dataset.
 
 **Encoding:** for each `vcodec` and `pix_fmt` pair, we use a default value for `g` and `crf` upon which we change a single value (either `g` or `crf`) to one of the specified values (we don't test every combination of those as this would be computationally too heavy).
@@ -120,18 +110,15 @@ Intermediate results saved for each `vcodec` and `pix_fmt` combination in csv ta
 These are then all concatenated to a single table ready for analysis.
 
 ## Caveats
-
 We tried to measure the most impactful parameters for both encoding and decoding. However, for computational reasons we can't test out every combination.
 
 Additional encoding parameters exist that are not included in this benchmark. In particular:
-
 - `-preset` which allows for selecting encoding presets. This represents a collection of options that will provide a certain encoding speed to compression ratio. By leaving this parameter unspecified, it is considered to be `medium` for libx264 and libx265 and `8` for libsvtav1.
 - `-tune` which allows to optimize the encoding for certain aspects (e.g. film quality, fast decoding, etc.).
 
 See the documentation mentioned above for more detailed info on these settings and for a more comprehensive list of other parameters.
 
 Similarly on the decoding side, other decoders exist but are not implemented in our current benchmark. To name a few:
-
 - `torchaudio`
 - `ffmpegio`
 - `decord`
@@ -140,17 +127,16 @@ Similarly on the decoding side, other decoders exist but are not implemented in
 Note as well that since we are mostly interested in the performance at decoding time (also because encoding is done only once before uploading a dataset), we did not measure encoding times nor have any metrics regarding encoding.
 However, besides the necessity to build ffmpeg from source, encoding did not pose any issue and it didn't take a significant amount of time during this benchmark.
 
-## Install
 
+## Install
 Building ffmpeg from source is required to include libx265 and libaom/libsvtav1 (av1) video codecs ([compilation guide](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu)).
 
 **Note:** While you still need to build torchvision with a conda-installed `ffmpeg<4.3` to use the `video_reader` decoder (as described in [#220](https://github.com/huggingface/lerobot/pull/220)), you also need another version which is custom-built with all the video codecs for encoding. For the script to then use that version, you can prepend the command above with `PATH="$HOME/bin:$PATH"`, which is where ffmpeg should be built.
 
-## Adding a video decoder
 
+## Adding a video decoder
 Right now, we're only benchmarking the two video decoder available with torchvision: `pyav` and `video_reader`.
 You can easily add a new decoder to benchmark by adding it to this function in the script:
-
 ```diff
 def decode_video_frames(
     video_path: str,
@@ -170,10 +156,9 @@ def decode_video_frames(
         raise NotImplementedError(backend)
 ```
 
+
 ## Example
-
 For a quick run, you can try these parameters:
-
 ```bash
 python benchmark/video/run_video_benchmark.py \
     --output-dir outputs/video_benchmark \
@@ -191,12 +176,11 @@ python benchmark/video/run_video_benchmark.py \
     --save-frames 0
 ```
 
+
 ## Results
 
 ### Reproduce
-
 We ran the benchmark with the following parameters:
-
 ```bash
 # h264 and h265 encodings
 python benchmark/video/run_video_benchmark.py \
@@ -237,10 +221,9 @@ python benchmark/video/run_video_benchmark.py \
 
 The full results are available [here](https://docs.google.com/spreadsheets/d/1OYJB43Qu8fC26k_OyoMFgGBBKfQRCi4BIuYitQnq3sw/edit?usp=sharing)
 
+
 ### Parameters selected for LeRobotDataset
-
 Considering these results, we chose what we think is the best set of encoding parameter:
-
 - vcodec: `libsvtav1`
 - pix-fmt: `yuv420p`
 - g: `2`
@@ -253,7 +236,7 @@ Since we're using av1 encoding, we're choosing the `pyav` decoder as `video_read
 These tables show the results for `g=2` and `crf=30`, using `timestamps-modes=6_frames` and `backend=pyav`
 
 | video_images_size_ratio            | vcodec     | pix_fmt |           |           |           |
-| ---------------------------------- | ---------- | ------- | --------- | --------- | --------- |
+|------------------------------------|------------|---------|-----------|-----------|-----------|
 |                                    | libx264    |         | libx265   |           | libsvtav1 |
 | repo_id                            | yuv420p    | yuv444p | yuv420p   | yuv444p   | yuv420p   |
 | lerobot/pusht_image                | **16.97%** | 17.58%  | 18.57%    | 18.86%    | 22.06%    |
@@ -262,7 +245,7 @@ These tables show the results for `g=2` and `crf=30`, using `timestamps-modes=6_
 | aliberts/kitchen                   | 1.40%      | 1.39%   | **1.00%** | **1.00%** | 2.52%     |
 
 | video_images_load_time_ratio       | vcodec  | pix_fmt |          |         |           |
-| ---------------------------------- | ------- | ------- | -------- | ------- | --------- |
+|------------------------------------|---------|---------|----------|---------|-----------|
 |                                    | libx264 |         | libx265  |         | libsvtav1 |
 | repo_id                            | yuv420p | yuv444p | yuv420p  | yuv444p | yuv420p   |
 | lerobot/pusht_image                | 6.45    | 5.19    | **1.90** | 2.12    | 2.47      |
@@ -271,7 +254,7 @@ These tables show the results for `g=2` and `crf=30`, using `timestamps-modes=6_
 | aliberts/kitchen                   | 1.46    | 1.46    | 0.28     | 0.51    | **0.26**  |
 
 |                                    |          | vcodec   | pix_fmt      |          |           |              |
-| ---------------------------------- | -------- | -------- | ------------ | -------- | --------- | ------------ |
+|------------------------------------|----------|----------|--------------|----------|-----------|--------------|
 |                                    |          | libx264  |              | libx265  |           | libsvtav1    |
 | repo_id                            | metric   | yuv420p  | yuv444p      | yuv420p  | yuv444p   | yuv420p      |
 | lerobot/pusht_image                | avg_mse  | 2.90E-04 | **2.03E-04** | 3.13E-04 | 2.29E-04  | 2.19E-04     |

benchmarks/video/capture_camera_feed.py

@@ -55,7 +55,7 @@ def display_and_save_video_stream(output_dir: Path, fps: int, width: int, height
         if not ret:
             print("Error: Could not read frame.")
             break
-        rr.log("video/stream", rr.Image(frame), static=True)
+        rr.log("video/stream", rr.Image(frame.numpy()), static=True)
         cv2.imwrite(str(capture_dir / f"frame_{frame_index:06d}.png"), frame)
         frame_index += 1
 

benchmarks/video/run_video_benchmark.py

@@ -35,12 +35,12 @@ import torch
 from skimage.metrics import mean_squared_error, peak_signal_noise_ratio, structural_similarity
 from tqdm import tqdm
 
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.datasets.video_utils import (
+from lerobot.common.datasets.lerobot_dataset import LeRobotDataset
+from lerobot.common.datasets.video_utils import (
     decode_video_frames_torchvision,
     encode_video_frames,
 )
-from lerobot.utils.benchmark import TimeBenchmark
+from lerobot.common.utils.benchmark import TimeBenchmark
 
 BASE_ENCODING = OrderedDict(
     [

docker/Dockerfile.internal

@@ -1,84 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This Dockerfile is designed for HuggingFace internal CI environments
-# that require GPU access. It starts from an NVIDIA CUDA base image.
-
-# docker build -f docker/Dockerfile.internal -t lerobot-internal .
-
-# Configure the base image for CI with GPU access
-# TODO(Steven): Bump these versions
-ARG CUDA_VERSION=12.4.1
-ARG OS_VERSION=22.04
-FROM nvidia/cuda:${CUDA_VERSION}-base-ubuntu${OS_VERSION}
-
-# Define Python version argument
-ARG PYTHON_VERSION=3.10
-
-# Configure environment variables
-ENV DEBIAN_FRONTEND=noninteractive \
-    MUJOCO_GL=egl \
-    PATH=/lerobot/.venv/bin:$PATH \
-    CUDA_VISIBLE_DEVICES=0 \
-    TEST_TYPE=single_gpu \
-    DEVICE=cuda
-
-# Install Python, system dependencies, and uv (as root)
-RUN apt-get update && apt-get install -y --no-install-recommends \
-    software-properties-common build-essential git curl \
-    libglib2.0-0 libgl1-mesa-glx libegl1-mesa ffmpeg \
-    libusb-1.0-0-dev speech-dispatcher libgeos-dev portaudio19-dev \
-    && add-apt-repository -y ppa:deadsnakes/ppa \
-    && apt-get update \
-    && apt-get install -y --no-install-recommends \
-       python${PYTHON_VERSION} \
-       python${PYTHON_VERSION}-venv \
-       python${PYTHON_VERSION}-dev \
-    && curl -LsSf https://astral.sh/uv/install.sh | sh \
-    && mv /root/.local/bin/uv /usr/local/bin/uv \
-    && useradd --create-home --shell /bin/bash user_lerobot \
-    && usermod -aG sudo user_lerobot \
-    && apt-get clean && rm -rf /var/lib/apt/lists/*
-
-# Create application directory and set permissions
-WORKDIR /lerobot
-RUN chown -R user_lerobot:user_lerobot /lerobot
-
-# Switch to the non-root user
-USER user_lerobot
-
-# Environment variables for the testing
-ENV HOME=/home/user_lerobot \
-    HF_HOME=/home/user_lerobot/.cache/huggingface \
-    HF_LEROBOT_HOME=/home/user_lerobot/.cache/huggingface/lerobot \
-    TORCH_HOME=/home/user_lerobot/.cache/torch \
-    TRITON_CACHE_DIR=/home/user_lerobot/.cache/triton
-
-# Create the virtual environment
-# We use a virtual environment inside the container—even though the container itself \
-# provides isolation—to ensure compatibility with the cluster and to prevent \
-# issues with MuJoCo and OpenGL drivers.
-RUN uv venv --python python${PYTHON_VERSION}
-
-# Install Python dependencies for caching
-COPY --chown=user_lerobot:user_lerobot pyproject.toml README.md MANIFEST.in ./
-COPY --chown=user_lerobot:user_lerobot src/ src/
-RUN uv pip install --no-cache ".[all]"
-
-# Copy the rest of the application source code
-# Make sure to have the git-LFS files for testing
-COPY --chown=user_lerobot:user_lerobot . .
-
-# Set the default command
-CMD ["/bin/bash"]

docker/Dockerfile.user

@@ -1,70 +0,0 @@
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# This Dockerfile is designed for a lerobot user who wants to
-# experiment with the project. It starts from an Python Slim base image.
-
-# docker build -f docker/Dockerfile.user -t lerobot-user .
-# docker run -it --rm lerobot-user
-
-# Configure the base image
-ARG PYTHON_VERSION=3.10
-FROM python:${PYTHON_VERSION}-slim
-
-# Configure environment variables
-ENV DEBIAN_FRONTEND=noninteractive \
-    MUJOCO_GL=egl \
-    PATH=/lerobot/.venv/bin:$PATH
-
-# Install system dependencies and uv (as root)
-RUN apt-get update && apt-get install -y --no-install-recommends \
-    build-essential git curl libglib2.0-0 libegl1-mesa-dev ffmpeg \
-    libusb-1.0-0-dev speech-dispatcher libgeos-dev portaudio19-dev \
-    && curl -LsSf https://astral.sh/uv/install.sh | sh \
-    && mv /root/.local/bin/uv /usr/local/bin/uv \
-    && useradd --create-home --shell /bin/bash user_lerobot \
-    && usermod -aG sudo user_lerobot \
-    && apt-get clean && rm -rf /var/lib/apt/lists/*
-
-# Create application directory and set permissions
-WORKDIR /lerobot
-RUN chown -R user_lerobot:user_lerobot /lerobot
-
-# Switch to the non-root user
-USER user_lerobot
-
-# Environment variables for the testing
-ENV HOME=/home/user_lerobot \
-    HF_HOME=/home/user_lerobot/.cache/huggingface \
-    HF_LEROBOT_HOME=/home/user_lerobot/.cache/huggingface/lerobot \
-    TORCH_HOME=/home/user_lerobot/.cache/torch \
-    TRITON_CACHE_DIR=/home/user_lerobot/.cache/triton
-
-# Create the virtual environment
-# We use a virtual environment inside the container—even though the container itself \
-# provides isolation—to closely resemble local development and allow users to \
-# run other Python projects in the same container without dependency conflicts.
-RUN uv venv
-
-# Install Python dependencies for caching
-COPY --chown=user_lerobot:user_lerobot pyproject.toml README.md MANIFEST.in ./
-COPY --chown=user_lerobot:user_lerobot src/ src/
-RUN uv pip install --no-cache ".[all]"
-
-# Copy the rest of the application code
-# Make sure to have the git-LFS files for testing
-COPY --chown=user_lerobot:user_lerobot . .
-
-# Set the default command
-CMD ["/bin/bash"]

docker/lerobot-cpu/Dockerfile

@@ -0,0 +1,29 @@
+# Configure image
+ARG PYTHON_VERSION=3.10
+FROM python:${PYTHON_VERSION}-slim
+
+# Configure environment variables
+ARG PYTHON_VERSION
+ENV DEBIAN_FRONTEND=noninteractive
+ENV MUJOCO_GL="egl"
+ENV PATH="/opt/venv/bin:$PATH"
+
+# Install dependencies and set up Python in a single layer
+RUN apt-get update && apt-get install -y --no-install-recommends \
+    build-essential cmake git \
+    libglib2.0-0 libgl1-mesa-glx libegl1-mesa ffmpeg \
+    speech-dispatcher libgeos-dev \
+    && ln -s /usr/bin/python${PYTHON_VERSION} /usr/bin/python \
+    && python -m venv /opt/venv \
+    && apt-get clean && rm -rf /var/lib/apt/lists/* \
+    && echo "source /opt/venv/bin/activate" >> /root/.bashrc
+
+# Clone repository and install LeRobot in a single layer
+COPY . /lerobot
+WORKDIR /lerobot
+RUN /opt/venv/bin/pip install --upgrade --no-cache-dir pip \
+    && /opt/venv/bin/pip install --no-cache-dir ".[test, aloha, xarm, pusht, dynamixel]" \
+        --extra-index-url https://download.pytorch.org/whl/cpu
+
+# Execute in bash shell rather than python
+CMD ["/bin/bash"]

docker/lerobot-gpu-dev/Dockerfile

@@ -0,0 +1,68 @@
+FROM nvidia/cuda:12.2.2-devel-ubuntu22.04
+
+# Configure image
+ARG PYTHON_VERSION=3.10
+ARG DEBIAN_FRONTEND=noninteractive
+
+# Install apt dependencies
+RUN apt-get update && apt-get install -y --no-install-recommends \
+    build-essential cmake \
+    git git-lfs openssh-client \
+    nano vim less util-linux tree \
+    htop atop nvtop \
+    sed gawk grep curl wget zip unzip \
+    tcpdump sysstat screen tmux \
+    libglib2.0-0 libgl1-mesa-glx libegl1-mesa \
+    speech-dispatcher portaudio19-dev libgeos-dev \
+    python${PYTHON_VERSION} python${PYTHON_VERSION}-venv python${PYTHON_VERSION}-dev \
+    && apt-get clean && rm -rf /var/lib/apt/lists/*
+
+# Install ffmpeg build dependencies. See:
+# https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu
+# TODO(aliberts): create image to build dependencies from source instead
+RUN apt-get update && apt-get install -y --no-install-recommends \
+    autoconf automake yasm \
+    libass-dev \
+    libfreetype6-dev \
+    libgnutls28-dev \
+    libunistring-dev \
+    libmp3lame-dev \
+    libtool \
+    libvorbis-dev \
+    meson \
+    ninja-build \
+    pkg-config \
+    texinfo \
+    yasm \
+    zlib1g-dev \
+    nasm \
+    libx264-dev \
+    libx265-dev libnuma-dev \
+    libvpx-dev \
+    libfdk-aac-dev \
+    libopus-dev \
+    libsvtav1-dev libsvtav1enc-dev libsvtav1dec-dev \
+    libdav1d-dev
+
+# Install gh cli tool
+RUN (type -p wget >/dev/null || (apt update && apt-get install wget -y)) \
+    && mkdir -p -m 755 /etc/apt/keyrings \
+    && wget -qO- https://cli.github.com/packages/githubcli-archive-keyring.gpg | tee /etc/apt/keyrings/githubcli-archive-keyring.gpg > /dev/null \
+    && chmod go+r /etc/apt/keyrings/githubcli-archive-keyring.gpg \
+    && echo "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/githubcli-archive-keyring.gpg] https://cli.github.com/packages stable main" | tee /etc/apt/sources.list.d/github-cli.list > /dev/null \
+    && apt update \
+    && apt install gh -y \
+    && apt clean && rm -rf /var/lib/apt/lists/*
+
+# Setup `python`
+RUN ln -s /usr/bin/python3 /usr/bin/python
+
+# Install poetry
+RUN curl -sSL https://install.python-poetry.org | python -
+ENV PATH="/root/.local/bin:$PATH"
+RUN echo 'if [ "$HOME" != "/root" ]; then ln -sf /root/.local/bin/poetry $HOME/.local/bin/poetry; fi' >> /root/.bashrc
+RUN poetry config virtualenvs.create false
+RUN poetry config virtualenvs.in-project true
+
+# Set EGL as the rendering backend for MuJoCo
+ENV MUJOCO_GL="egl"

docker/lerobot-gpu/Dockerfile

@@ -0,0 +1,24 @@
+FROM nvidia/cuda:12.4.1-base-ubuntu22.04
+
+# Configure environment variables
+ARG PYTHON_VERSION=3.10
+ENV DEBIAN_FRONTEND=noninteractive
+ENV MUJOCO_GL="egl"
+ENV PATH="/opt/venv/bin:$PATH"
+
+# Install dependencies and set up Python in a single layer
+RUN apt-get update && apt-get install -y --no-install-recommends \
+    build-essential cmake git \
+    libglib2.0-0 libgl1-mesa-glx libegl1-mesa ffmpeg \
+    speech-dispatcher libgeos-dev \
+    python${PYTHON_VERSION}-dev python${PYTHON_VERSION}-venv \
+    && ln -s /usr/bin/python${PYTHON_VERSION} /usr/bin/python \
+    && python -m venv /opt/venv \
+    && apt-get clean && rm -rf /var/lib/apt/lists/* \
+    && echo "source /opt/venv/bin/activate" >> /root/.bashrc
+
+# Clone repository and install LeRobot in a single layer
+COPY . /lerobot
+WORKDIR /lerobot
+RUN /opt/venv/bin/pip install --upgrade --no-cache-dir pip \
+    && /opt/venv/bin/pip install --no-cache-dir ".[test, aloha, xarm, pusht, dynamixel]"

docs-requirements.txt

@@ -1,3 +0,0 @@
-# docs-requirements.txt
-hf-doc-builder @ git+https://github.com/huggingface/doc-builder.git@main
-watchdog>=6.0.0

docs/README.md

@@ -20,13 +20,12 @@ To generate the documentation, you first have to build it. Several packages are
 you can install them with the following command, at the root of the code repository:
 
 ```bash
-pip install -e . -r docs-requirements.txt
+pip install -e ".[docs]"
 ```
 
 You will also need `nodejs`. Please refer to their [installation page](https://nodejs.org/en/download)
 
 ---
-
 **NOTE**
 
 You only need to generate the documentation to inspect it locally (if you're planning changes and want to
@@ -64,7 +63,6 @@ doc-builder preview lerobot docs/source/
 The docs will be viewable at [http://localhost:3000](http://localhost:3000). You can also preview the docs once you have opened a PR. You will see a bot add a comment to a link where the documentation with your changes lives.
 
 ---
-
 **NOTE**
 
 The `preview` command only works with existing doc files. When you add a completely new file, you need to update `_toctree.yml` & restart `preview` command (`ctrl-c` to stop it & call `doc-builder preview ...` again).
@@ -91,7 +89,6 @@ Sections that were moved:
 
 [ <a href="#section-b">Section A</a><a id="section-a"></a> ]
 ```
-
 and of course, if you moved it to another file, then:
 
 ```
@@ -122,6 +119,7 @@ and objects like True, None or any strings should usually be put in `code`.
 
 Multi-line code blocks can be useful for displaying examples. They are done between two lines of three backticks as usual in Markdown:
 
+
 ````
 ```
 # first line of code

docs/source/_toctree.yml

@@ -5,46 +5,8 @@
     title: Installation
   title: Get started
 - sections:
-  - local: il_robots
-    title: Imitation Learning for Robots
-  - local: il_sim
-    title: Imitation Learning in Sim
-  - local: cameras
-    title: Cameras
-  - local: integrate_hardware
-    title: Bring Your Own Hardware
-  - local: hilserl
-    title: Train a Robot with RL
-  - local: hilserl_sim
-    title: Train RL in Simulation
-  - local: async
-    title: Use Async Inference
+  - local: assemble_so101
+    title: Assemble SO-101
+  - local: getting_started_real_world_robot
+    title: Getting Started with Real-World Robots
   title: "Tutorials"
-- sections:
-  - local: smolvla
-    title: Finetune SmolVLA
-  title: "Policies"
-- sections:
-  - local: hope_jr
-    title: Hope Jr
-  - local: so101
-    title: SO-101
-  - local: so100
-    title: SO-100
-  - local: koch
-    title: Koch v1.1
-  - local: lekiwi
-    title: LeKiwi
-  title: "Robots"
-- sections:
-  - local: notebooks
-    title: Notebooks
-  - local: feetech
-    title: Updating Feetech Firmware
-  title: "Resources"
-- sections:
-  - local: contributing
-    title: Contribute to LeRobot
-  - local: backwardcomp
-    title: Backward compatibility
-  title: "About"

docs/source/assemble_so101.mdx

@@ -0,0 +1,348 @@
+# Assemble SO-101
+
+In the steps below we explain how to assemble our flagship robot, the SO-101.
+
+## Source the parts
+
+Follow this [README](https://github.com/TheRobotStudio/SO-ARM100). It contains the bill of materials, with a link to source the parts, as well as the instructions to 3D print the parts,
+and advice if it's your first time printing or if you don't own a 3D printer.
+
+Before assembling, you will first need to configure your motors. To this end, we provide a nice script, so let's first install LeRobot. After configuration, we will also guide you through assembly.
+
+## Install LeRobot
+
+To install LeRobot follow our [Installation Guide](./installation)
+
+## Configure motors
+
+To configure the motors designate one bus servo adapter and 6 motors for your leader arm, and similarly the other bus servo adapter and 6 motors for the follower arm. It's convenient to label them and write on each motor if it's for the follower `F` or for the leader `L` and it's ID from 1 to 6.
+
+You now should plug the 5V or 12V power supply to the motor bus. 5V for the STS3215 7.4V motors and 12V for the STS3215 12V motors. Note that the leader arm always uses the 7.4V motors, so watch out that you plug in the right power supply if you have 12V and 7.4V motors, otherwise you might burn your motors! Now, connect the motor bus to your computer via USB. Note that the USB doesn't provide any power, and both the power supply and USB have to be plugged in.
+
+### Find the USB ports associated to each arm
+
+To find the port for each bus servo adapter, run this script:
+```bash
+python lerobot/scripts/find_motors_bus_port.py
+```
+##### Example outputs of script
+
+<hfoptions id="example">
+<hfoption id="Mac">
+
+Example output leader arm's port: `/dev/tty.usbmodem575E0031751`
+
+```bash
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your MotorsBus and press Enter when done.
+
+[...Disconnect leader arm and press Enter...]
+
+The port of this MotorsBus is /dev/tty.usbmodem575E0031751
+Reconnect the usb cable.
+```
+
+Example output follower arm port: `/dev/tty.usbmodem575E0032081`
+
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your MotorsBus and press Enter when done.
+
+[...Disconnect follower arm and press Enter...]
+
+The port of this MotorsBus is /dev/tty.usbmodem575E0032081
+Reconnect the usb cable.
+```
+
+</hfoption>
+<hfoption id="Linux">
+
+On Linux, you might need to give access to the USB ports by running:
+```bash
+sudo chmod 666 /dev/ttyACM0
+sudo chmod 666 /dev/ttyACM1
+```
+
+Example output leader arm port: `/dev/ttyACM0`
+
+```bash
+Finding all available ports for the MotorBus.
+['/dev/ttyACM0', '/dev/ttyACM1']
+Remove the usb cable from your MotorsBus and press Enter when done.
+
+[...Disconnect leader arm and press Enter...]
+
+The port of this MotorsBus is /dev/ttyACM0
+Reconnect the usb cable.
+```
+
+Example output follower arm port: `/dev/ttyACM1`
+
+```
+Finding all available ports for the MotorBus.
+['/dev/ttyACM0', '/dev/ttyACM1']
+Remove the usb cable from your MotorsBus and press Enter when done.
+
+[...Disconnect follower arm and press Enter...]
+
+The port of this MotorsBus is /dev/ttyACM1
+Reconnect the usb cable.
+```
+</hfoption>
+</hfoptions>
+
+#### Update config file
+
+Now that you have your ports, update the **port** default values of [`SO101RobotConfig`](https://github.com/huggingface/lerobot/blob/main/lerobot/common/robot_devices/robots/configs.py).
+You will find a class called `so101` where you can update the `port` values with your actual motor ports:
+```diff
+@RobotConfig.register_subclass("so101")
+@dataclass
+class So101RobotConfig(ManipulatorRobotConfig):
+    calibration_dir: str = ".cache/calibration/so101"
+    # `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
+    # Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
+    # the number of motors in your follower arms.
+    max_relative_target: int | None = None
+
+    leader_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+-               port="/dev/tty.usbmodem58760431091",
++               port="{ADD YOUR LEADER PORT}",
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                },
+            ),
+        }
+    )
+
+    follower_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": FeetechMotorsBusConfig(
+-                port="/dev/tty.usbmodem585A0076891",
++                port="{ADD YOUR FOLLOWER PORT}",
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "sts3215"],
+                    "shoulder_lift": [2, "sts3215"],
+                    "elbow_flex": [3, "sts3215"],
+                    "wrist_flex": [4, "sts3215"],
+                    "wrist_roll": [5, "sts3215"],
+                    "gripper": [6, "sts3215"],
+                },
+            ),
+        }
+    )
+```
+
+Here is a video of the process:
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/lerobot-find-motorbus.mp4" type="video/mp4" />
+  </video>
+ </div>
+
+## Step-by-Step Assembly Instructions
+
+The follower arm uses 6x STS3215 motors with 1/345 gearing. The leader however uses three differently geared motors to make sure it can both sustain its own weight and it can be moved without requiring much force. Which motor is needed for which joint is shown in table below.
+
+| Leader-Arm Axis | Motor | Gear Ratio |
+|-----------------|:-------:|:----------:|
+| Base / Shoulder Yaw | 1 | 1 / 191 |
+| Shoulder Pitch      | 2 | 1 / 345 |
+| Elbow               | 3 | 1 / 191 |
+| Wrist Roll          | 4 | 1 / 147 |
+| Wrist Pitch         | 5 | 1 / 147 |
+| Gripper             | 6 | 1 / 147 |
+
+### Set motor IDs
+
+Plug your motor in one of the two ports of the motor bus and run this script to set its ID to 1. Replace the text after --port to the corresponding control board port.
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand feetech \
+  --model sts3215 \
+  --baudrate 1000000 \
+  --ID 1
+```
+
+Then unplug your motor and plug the second motor and set its ID to 2.
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand feetech \
+  --model sts3215 \
+  --baudrate 1000000 \
+  --ID 2
+```
+
+Redo this process for all your motors until ID 6. Do the same for the 6 motors of the leader arm, but make sure to change the power supply if you use motors with different voltage and make sure you give the right ID to the right motor according to the table above.
+
+Here is a video of the process:
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/lerobot-configure-motor.mp4" type="video/mp4" />
+  </video>
+</div>
+
+### Clean Parts
+Remove all support material from the 3D-printed parts, the easiest way to do this is using a small screwdriver to get underneath the support material.
+
+### Joint 1
+
+- Place the first motor into the base.
+- Fasten the motor with 4 M2x6mm screws (smallest screws). Two from the top and two from bottom.
+- Slide over the first motor holder and fasten it using two M2x6mm screws (one on each side).
+- Install both motor horns, securing the top horn with a M3x6mm screw.
+- Attach the shoulder part.
+- Tighten the shoulder part with 4 M3x6mm screws on top and 4 M3x6mm screws on the bottom
+- Add the shoulder motor holder.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint1_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+### Joint 2
+
+- Slide the second motor in from the top.
+- Fasten the second motor with 4 M2x6mm screws.
+- Attach both motor horns to motor 2, again use the M3x6mm horn screw.
+- Attach the upper arm with 4 M3x6mm screws on each side.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint2_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+### Joint 3
+
+- Insert motor 3 and fasten using 4 M2x6mm screws
+- Attach both motor horns to motor 3 and secure one again with a M3x6mm horn screw.
+- Connect the forearm to motor 3 using 4 M3x6mm screws on each side.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint3_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+### Joint 4
+
+- Slide over motor holder 4.
+- Slide in motor 4.
+- Fasten motor 4 with 4 M2x6mm screws and attach its motor horns, use a M3x6mm horn screw.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint4_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+### Joint 5
+
+- Insert motor 5 into the wrist holder and secure it with 2 M2x6mm front screws.
+- Install only one motor horn on the wrist motor and secure it with a M3x6mm horn screw.
+- Secure the wrist to motor 4 using 4 M3x6mm screws on both sides.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint5_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+### Gripper / Handle
+
+<hfoptions id="assembly">
+<hfoption id="Follower">
+
+- Attach the gripper to motor 5, attach it to the motor horn on the wrist using 4 M3x6mm screws.
+- Insert the gripper motor and secure it with 2 M2x6mm screws on each side.
+- Attach the motor horns and again use a M3x6mm horn screw.
+- Install the gripper claw and secure it with 4 M3x6mm screws on both sides.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Gripper_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+</hfoption>
+<hfoption id="Leader">
+
+- Mount the leader holder onto the wrist and secure it with 4 M3x6mm screws.
+- Attach the handle to motor 5 using 1 M2x6mm screw.
+- Insert the gripper motor, secure it with 2 M2x6mm screws on each side, attach a motor horn using a M3x6mm horn screw.
+- Attach the follower trigger with 4 M3x6mm screws.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Leader_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+</hfoption>
+</hfoptions>
+
+##### Wiring
+
+- Attach the motor controller on the back.
+- Then insert all wires, use the wire guides everywhere to make sure the wires don't unplug themselves and stay in place.
+
+<div class="video-container">
+  <video controls width="600">
+    <source src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Wiring_v2.mp4" type="video/mp4" />
+  </video>
+</div>
+
+## Calibrate
+
+Next, you'll need to calibrate your SO-101 robot to ensure that the leader and follower arms have the same position values when they are in the same physical position.
+The calibration process is very important because it allows a neural network trained on one SO-101 robot to work on another.
+
+#### Manual calibration of follower arm
+
+You will need to move the follower arm to these positions sequentially, note that the rotated position is on the right side of the robot and you have to open the gripper fully.
+
+| 1. Middle position | 2. Zero position                                                                                                                                       | 3. Rotated position                                                                                                                                             | 4. Rest position                                                                                                                                       |
+| ------------ |------------------------------------------------------------------------------------------------------------------------------------------------------ | --------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/follower_middle.webp?raw=true" alt="SO-101 leader arm middle position" title="SO-101 leader arm middle position" style="width:100%;"> | <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/follower_zero.webp?raw=true" alt="SO-101 leader arm zero position" title="SO-101 leader arm zero position" style="width:100%;"> | <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/follower_rotated.webp?raw=true" alt="SO-101 leader arm rotated position" title="SO-101 leader arm rotated position" style="width:100%;"> | <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/follower_rest.webp?raw=true" alt="SO-101 leader arm rest position" title="SO-101 leader arm rest position" style="width:100%;"> |
+
+Make sure both arms are connected and run this script to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so101 \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_follower"]'
+```
+
+#### Manual calibration of leader arm
+You will also need to move the leader arm to these positions sequentially:
+
+| 1. Middle position | 2. Zero position                                                                                                                                       | 3. Rotated position                                                                                                                                             | 4. Rest position                                                                                                                                       |
+| ------------ |------------------------------------------------------------------------------------------------------------------------------------------------------ | --------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/leader_middle.webp?raw=true" alt="SO-101 leader arm middle position" title="SO-101 leader arm middle position" style="width:100%;"> | <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/leader_zero.webp?raw=true" alt="SO-101 leader arm zero position" title="SO-101 leader arm zero position" style="width:100%;"> | <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/leader_rotated.webp?raw=true" alt="SO-101 leader arm rotated position" title="SO-101 leader arm rotated position" style="width:100%;"> | <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/leader_rest.webp?raw=true" alt="SO-101 leader arm rest position" title="SO-101 leader arm rest position" style="width:100%;"> |
+
+Run this script to launch manual calibration:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so101 \
+  --robot.cameras='{}' \
+  --control.type=calibrate \
+  --control.arms='["main_leader"]'
+```
+
+Congrats 🎉, your robot is all set to learn a task on its own. Start training it by following this tutorial: [Getting started with real-world robots](./getting_started_real_world_robot)

docs/source/async.mdx

@@ -1,312 +0,0 @@
-# Asynchronous Inference
-
-With our [SmolVLA](https://huggingface.co/papers/2506.01844) we introduced a new way to run inference on real-world robots, **decoupling action prediction from action execution**.
-In this tutorial, we'll show how to use asynchronous inference (_async inference_) using a finetuned version of SmolVLA, and all the policies supported by LeRobot.
-**Try async inference with all the policies** supported by LeRobot!
-
-**What you'll learn:**
-
-1. Why asynchronous inference matters and how it compares to, more traditional, sequential inference.
-2. How to spin-up a `PolicyServer` and connect a `RobotClient` from the same machine, and even over the network.
-3. How to tune key parameters (`actions_per_chunk`, `chunk_size_threshold`) for your robot and policy.
-
-If you get stuck, hop into our [Discord community](https://discord.gg/s3KuuzsPFb)!
-
-In a nutshell: with _async inference_, your robot keeps acting while the policy server is already busy computing the next chunk of actions---eliminating "wait-for-inference" lags and unlocking smoother, more reactive behaviours.
-This is fundamentally different from synchronous inference (sync), where the robot stays idle while the policy computes the next chunk of actions.
-
----
-
-## Getting started with async inference
-
-You can read more information on asynchronous inference in our [blogpost](https://huggingface.co/blog/async-robot-inference). This guide is designed to help you quickly set up and run asynchronous inference in your environment.
-
-First, install `lerobot` with the `async` tag, to install the extra dependencies required to run async inference.
-
-```shell
-pip install -e ".[async]"
-```
-
-Then, spin up a policy server (in one terminal, or in a separate machine) specifying the host address and port for the client to connect to.
-You can spin up a policy server running:
-
-```shell
-python src/lerobot/scripts/server/policy_server.py \
-    --host=127.0.0.1 \
-    --port=8080 \
-```
-
-This will start a policy server listening on `127.0.0.1:8080` (`localhost`, port 8080). At this stage, the policy server is empty, as all information related to which policy to run and with which parameters are specified during the first handshake with the client. Spin up a client with:
-
-```shell
-python src/lerobot/scripts/server/robot_client.py \
-    --server_address=127.0.0.1:8080 \ # SERVER: the host address and port of the policy server
-    --robot.type=so100_follower \ # ROBOT: your robot type
-    --robot.port=/dev/tty.usbmodem585A0076841 \ # ROBOT: your robot port
-    --robot.id=follower_so100 \ # ROBOT: your robot id, to load calibration file
-    --robot.cameras="{ laptop: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}, phone: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}}" \ # POLICY: the cameras used to acquire frames, with keys matching the keys expected by the policy
-    --task="dummy" \ # POLICY: The task to run the policy on (`Fold my t-shirt`). Not necessarily defined for all policies, such as `act`
-    --policy_type=your_policy_type \ # POLICY: the type of policy to run (smolvla, act, etc)
-    --pretrained_name_or_path=user/model \ # POLICY: the model name/path on server to the checkpoint to run (e.g., lerobot/smolvla_base)
-    --policy_device=mps \ # POLICY: the device to run the policy on, on the server
-    --actions_per_chunk=50 \ # POLICY: the number of actions to output at once
-    --chunk_size_threshold=0.5 \ # CLIENT: the threshold for the chunk size before sending a new observation to the server
-    --aggregate_fn_name=weighted_average \ # CLIENT: the function to aggregate actions on overlapping portions
-    --debug_visualize_queue_size=True # CLIENT: whether to visualize the queue size at runtime
-```
-
-In summary, you need to specify instructions for:
-
-- `SERVER`: the address and port of the policy server
-- `ROBOT`: the type of robot to connect to, the port to connect to, and the local `id` of the robot
-- `POLICY`: the type of policy to run, and the model name/path on server to the checkpoint to run. You also need to specify which device should the sever be using, and how many actions to output at once (capped at the policy max actions value).
-- `CLIENT`: the threshold for the chunk size before sending a new observation to the server, and the function to aggregate actions on overlapping portions. Optionally, you can also visualize the queue size at runtime, to help you tune the `CLIENT` parameters.
-
-Importantly,
-
-- `actions_per_chunk` and `chunk_size_threshold` are key parameters to tune for your setup.
-- `aggregate_fn_name` is the function to aggregate actions on overlapping portions. You can either add a new one to a registry of functions, or add your own in `robot_client.py` (see [here](NOTE:addlinktoLOC))
-- `debug_visualize_queue_size` is a useful tool to tune the `CLIENT` parameters.
-
-## Done! You should see your robot moving around by now 😉
-
-## Async vs. synchronous inference
-
-Synchronous inference relies on interleaving action chunk prediction and action execution. This inherently results in _idle frames_, frames where the robot awaits idle the policy's output: a new action chunk.
-In turn, inference is plagued by evident real-time lags, where the robot simply stops acting due to the lack of available actions.
-With robotics models increasing in size, this problem risks becoming only more severe.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/async-inference/sync.png"
-    width="80%"
-  ></img>
-</p>
-<p align="center">
-  <i>Synchronous inference</i> makes the robot idle while the policy is
-  computing the next chunk of actions.
-</p>
-
-To overcome this, we design async inference, a paradigm where action planning and execution are decoupled, resulting in (1) higher adaptability and, most importantly, (2) no idle frames.
-Crucially, with async inference, the next action chunk is computed _before_ the current one is exhausted, resulting in no idleness.
-Higher adaptability is ensured by aggregating the different action chunks on overlapping portions, obtaining an up-to-date plan and a tighter control loop.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/async-inference/async.png"
-    width="80%"
-  ></img>
-</p>
-<p align="center">
-  <i>Asynchronous inference</i> results in no idleness because the next chunk is
-  computed before the current chunk is exhausted.
-</p>
-
----
-
-## Start the Policy Server
-
-Policy servers are wrappers around a `PreTrainedPolicy` interfacing them with observations coming from a robot client.
-Policy servers are initialized as empty containers which are populated with the requested policy specified in the initial handshake between the robot client and the policy server.
-As such, spinning up a policy server is as easy as specifying the host address and port. If you're running the policy server on the same machine as the robot client, you can use `localhost` as the host address.
-
-<hfoptions id="start_policy_server">
-<hfoption id="Command">
-```bash
-python -m lerobot.scripts.server.policy_server \
-    --host="localhost" \
-    --port=8080
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.scripts.server.configs import PolicyServerConfig
-from lerobot.scripts.server.policy_server import serve
-
-config = PolicyServerConfig(
-    host="localhost",
-    port=8080,
-)
-serve(config)
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-This listens on `localhost:8080` for an incoming connection from the associated`RobotClient`, which will communicate which policy to run during the first client-server handshake.
-
----
-
-## Launch the Robot Client
-
-`RobotClient` is a wrapper around a `Robot` instance, which `RobotClient` connects to the (possibly remote) `PolicyServer`.
-The `RobotClient` streams observations to the `PolicyServer`, and receives action chunks obtained running inference on the server (which we assume to have better computational resources than the robot controller).
-
-<hfoptions id="start_robot_client">
-<hfoption id="Command">
-```bash
-python src/lerobot/scripts/server/robot_client.py \
-    --server_address=127.0.0.1:8080 \ # SERVER: the host address and port of the policy server
-    --robot.type=so100_follower \ # ROBOT: your robot type
-    --robot.port=/dev/tty.usbmodem585A0076841 \ # ROBOT: your robot port
-    --robot.id=follower_so100 \ # ROBOT: your robot id, to load calibration file
-    --robot.cameras="{ laptop: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}, phone: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}}" \ # POLICY: the cameras used to acquire frames, with keys matching the keys expected by the policy
-    --task="dummy" \ # POLICY: The task to run the policy on (`Fold my t-shirt`). Not necessarily defined for all policies, such as `act`
-    --policy_type=your_policy_type \ # POLICY: the type of policy to run (smolvla, act, etc)
-    --pretrained_name_or_path=user/model \ # POLICY: the model name/path on server to the checkpoint to run (e.g., lerobot/smolvla_base)
-    --policy_device=mps \ # POLICY: the device to run the policy on, on the server
-    --actions_per_chunk=50 \ # POLICY: the number of actions to output at once
-    --chunk_size_threshold=0.5 \ # CLIENT: the threshold for the chunk size before sending a new observation to the server
-    --aggregate_fn_name=weighted_average \ # CLIENT: the function to aggregate actions on overlapping portions
-    --debug_visualize_queue_size=True # CLIENT: whether to visualize the queue size at runtime
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-import threading
-from lerobot.robots.so100_follower import SO100FollowerConfig
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.scripts.server.configs import RobotClientConfig
-from lerobot.scripts.server.robot_client import RobotClient
-from lerobot.scripts.server.helpers import visualize_action_queue_size
-
-# 1. Create the robot instance
-"""Check out the cameras available in your setup by running `python lerobot/find_cameras.py`"""
-# these cameras must match the ones expected by the policy
-# check the config.json on the Hub for the policy you are using
-camera_cfg = {
-    "top": OpenCVCameraConfig(index_or_path=0, width=640, height=480, fps=30),
-    "side": OpenCVCameraConfig(index_or_path=1, width=640, height=480, fps=30)
-}
-
-robot_cfg = SO100FollowerConfig(
-  port="/dev/tty.usbmodem585A0076841",
-  id="follower_so100",
-  cameras=camera_cfg
-)
-
-# 3. Create client configuration
-client_cfg = RobotClientConfig(
-    robot=robot_cfg,
-    server_address="localhost:8080",
-    policy_device="mps",
-    policy_type="smolvla",
-    pretrained_name_or_path="fracapuano/smolvla_async",
-    chunk_size_threshold=0.5,
-    actions_per_chunk=50,  # make sure this is less than the max actions of the policy
-)
-
-# 4. Create and start client
-client = RobotClient(client_cfg)
-
-# 5. Specify the task
-task = "Don't do anything, stay still"
-
-if client.start():
-    # Start action receiver thread
-    action_receiver_thread = threading.Thread(target=client.receive_actions, daemon=True)
-    action_receiver_thread.start()
-
-    try:
-        # Run the control loop
-        client.control_loop(task)
-    except KeyboardInterrupt:
-        client.stop()
-        action_receiver_thread.join()
-        # (Optionally) plot the action queue size
-        visualize_action_queue_size(client.action_queue_size)
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-The following two parameters are key in every setup:
-
-<table>
-  <thead>
-    <tr>
-      <th>Hyperparameter</th>
-      <th>Default</th>
-      <th>What it does</th>
-    </tr>
-  </thead>
-  <tbody>
-    <tr>
-      <td>
-        <code>actions_per_chunk</code>
-      </td>
-      <td>50</td>
-      <td>
-        How many actions the policy outputs at once. Typical values: 10-50.
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <code>chunk_size_threshold</code>
-      </td>
-      <td>0.7</td>
-      <td>
-        When the queue is ≤ 50% full, the client sends a fresh observation.
-        Value in [0, 1].
-      </td>
-    </tr>
-  </tbody>
-</table>
-
-<Tip>
-  Different values of `actions_per_chunk` and `chunk_size_threshold` do result
-  in different behaviours.
-</Tip>
-
-On the one hand, increasing the value of `actions_per_chunk` will result in reducing the likelihood of ending up with no actions to execute, as more actions will be available when the new chunk is computed.
-However, larger values of `actions_per_chunk` might also result in less precise actions, due to the compounding errors consequent to predicting actions over longer timespans.
-
-On the other hand, increasing the value of `chunk_size_threshold` will result in sending out to the `PolicyServer` observations for inference more often, resulting in a larger number of updates action chunks, overlapping on significant portions. This results in high adaptability, in the limit predicting one action chunk for each observation, which is in turn only marginally consumed while a new one is produced.
-This option does also put more pressure on the inference pipeline, as a consequence of the many requests. Conversely, values of `chunk_size_threshold` close to 0.0 collapse to the synchronous edge case, whereby new observations are only sent out whenever the current chunk is exhausted.
-
-We found the default values of `actions_per_chunk` and `chunk_size_threshold` to work well in the experiments we developed for the [SmolVLA paper](https://huggingface.co/papers/2506.01844), but recommend experimenting with different values to find the best fit for your setup.
-
-### Tuning async inference for your setup
-
-1. **Choose your computational resources carefully.** [PI0](https://huggingface.co/lerobot/pi0) occupies 14GB of memory at inference time, while [SmolVLA](https://huggingface.co/lerobot/smolvla_base) requires only ~2GB. You should identify the best computational resource for your use case keeping in mind smaller policies require less computational resources. The combination of policy and device used (CPU-intensive, using MPS, or the number of CUDA cores on a given NVIDIA GPU) directly impacts the average inference latency you should expect.
-2. **Adjust your `fps` based on inference latency.** While the server generates a new action chunk, the client is not idle and is stepping through its current action queue. If the two processes happen at fundamentally different speeds, the client might end up with an empty queue. As such, you should reduce your fps if you consistently run out of actions in queue.
-3. **Adjust `chunk_size_threshold`**.
-   - Values closer to `0.0` result in almost sequential behavior. Values closer to `1.0` → send observation every step (more bandwidth, relies on good world-model).
-   - We found values around 0.5-0.6 to work well. If you want to tweak this, spin up a `RobotClient` setting the `--debug-visualize-queue-size` to `True`. This will plot the action queue size evolution at runtime, and you can use it to find the value of `chunk_size_threshold` that works best for your setup.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/async-inference/queues.png"
-    width="80%"
-  ></img>
-</p>
-<p align="center">
-  <i>
-    The action queue size is plotted at runtime when the
-    `--debug-visualize-queue-size` flag is passed, for various levels of
-    `chunk_size_threshold` (`g` in the SmolVLA paper).
-  </i>
-</p>
-
----
-
-## Conclusion
-
-Asynchronous inference represents a significant advancement in real-time robotics control, addressing the fundamental challenge of inference latency that has long plagued robotics applications. Through this tutorial, you've learned how to implement a complete async inference pipeline that eliminates idle frames and enables smoother, more reactive robot behaviors.
-
-**Key Takeaways:**
-
-- **Paradigm Shift**: Async inference decouples action prediction from execution, allowing robots to continue acting while new action chunks are computed in parallel
-- **Performance Benefits**: Eliminates "wait-for-inference" lags that are inherent in synchronous approaches, becoming increasingly important as policy models grow larger
-- **Flexible Architecture**: The server-client design enables distributed computing, where inference can run on powerful remote hardware while maintaining real-time robot control
-- **Tunable Parameters**: Success depends on properly configuring `actions_per_chunk` and `chunk_size_threshold` for your specific hardware, policy, and task requirements
-- **Universal Compatibility**: Works with all LeRobot-supported policies, from lightweight ACT models to vision-language models like SmolVLA
-
-Start experimenting with the default parameters, monitor your action queue sizes, and iteratively refine your setup to achieve optimal performance for your specific use case.
-If you want to discuss this further, hop into our [Discord community](https://discord.gg/s3KuuzsPFb), or open an issue on our [GitHub repository](https://github.com/lerobot/lerobot/issues).

docs/source/backwardcomp.mdx

@@ -1,95 +0,0 @@
-# Backward compatibility
-
-## Hardware API redesign
-
-PR [#777](https://github.com/huggingface/lerobot/pull/777) improves the LeRobot calibration but is **not backward-compatible**. Below is a overview of what changed and how you can continue to work with datasets created before this pull request.
-
-### What changed?
-
-|                                   | Before PR #777                                    | After PR #777                                                |
-| --------------------------------- | ------------------------------------------------- | ------------------------------------------------------------ |
-| **Joint range**                   | Degrees `-180...180°`                             | **Normalised range** Joints: `–100...100` Gripper: `0...100` |
-| **Zero position (SO100 / SO101)** | Arm fully extended horizontally                   | **In middle of the range for each joint**                    |
-| **Boundary handling**             | Software safeguards to detect ±180 ° wrap-arounds | No wrap-around logic needed due to mid-range zero            |
-
----
-
-### Impact on existing datasets
-
-- Recorded trajectories created **before** PR #777 will replay incorrectly if loaded directly:
-  - Joint angles are offset and incorrectly normalized.
-- Any models directly finetuned or trained on the old data will need their inputs and outputs converted.
-
-### Using datasets made with the previous calibration system
-
-We provide a migration example script for replaying an episode recorded with the previous calibration here: `examples/backward_compatibility/replay.py`.
-Below we take you through the modifications that are done in the example script to make the previous calibration datasets work.
-
-```diff
-+   key = f"{name.removeprefix('main_')}.pos"
-    action[key] = action_array[i].item()
-+   action["shoulder_lift.pos"] = -(action["shoulder_lift.pos"] - 90)
-+   action["elbow_flex.pos"] -= 90
-```
-
-Let's break this down.
-New codebase uses `.pos` suffix for the position observations and we have removed `main_` prefix:
-
-<!-- prettier-ignore-start -->
-```python
-key = f"{name.removeprefix('main_')}.pos"
-```
-<!-- prettier-ignore-end -->
-
-For `"shoulder_lift"` (id = 2), the 0 position is changed by -90 degrees and the direction is reversed compared to old calibration/code.
-
-<!-- prettier-ignore-start -->
-```python
-action["shoulder_lift.pos"] = -(action["shoulder_lift.pos"] - 90)
-```
-<!-- prettier-ignore-end -->
-
-For `"elbow_flex"` (id = 3), the 0 position is changed by -90 degrees compared to old calibration/code.
-
-<!-- prettier-ignore-start -->
-```python
-action["elbow_flex.pos"] -= 90
-```
-<!-- prettier-ignore-end -->
-
-To use degrees normalization we then set the `--robot.use_degrees` option to `true`.
-
-```diff
-python examples/backward_compatibility/replay.py \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem5A460814411 \
-    --robot.id=blue \
-+   --robot.use_degrees=true \
-    --dataset.repo_id=my_dataset_id \
-    --dataset.episode=0
-```
-
-### Using policies trained with the previous calibration system
-
-Policies output actions in the same format as the datasets (`torch.Tensors`). Therefore, the same transformations should be applied.
-
-To find these transformations, we recommend to first try and and replay an episode of the dataset your policy was trained on using the section above.
-Then, add these same transformations on your inference script (shown here in the `record.py` script):
-
-```diff
-action_values = predict_action(
-    observation_frame,
-    policy,
-    get_safe_torch_device(policy.config.device),
-    policy.config.use_amp,
-    task=single_task,
-    robot_type=robot.robot_type,
-    )
-    action = {key: action_values[i].item() for i, key in enumerate(robot.action_features)}
-
-+   action["shoulder_lift.pos"] = -(action["shoulder_lift.pos"] - 90)
-+   action["elbow_flex.pos"] -= 90
-    robot.send_action(action)
-```
-
-If you have questions or run into migration issues, feel free to ask them on [Discord](https://discord.gg/s3KuuzsPFb)

docs/source/cameras.mdx

@@ -1,206 +0,0 @@
-# Cameras
-
-LeRobot offers multiple options for video capture, including phone cameras, built-in laptop cameras, external webcams, and Intel RealSense cameras. To efficiently record frames from most cameras, you can use either the `OpenCVCamera` or `RealSenseCamera` class. For additional compatibility details on the `OpenCVCamera` class, refer to the [Video I/O with OpenCV Overview](https://docs.opencv.org/4.x/d0/da7/videoio_overview.html).
-
-### Finding your camera
-
-To instantiate a camera, you need a camera identifier. This identifier might change if you reboot your computer or re-plug your camera, a behavior mostly dependant on your operating system.
-
-To find the camera indices of the cameras plugged into your system, run the following script:
-
-```bash
-lerobot-find-cameras opencv # or realsense for Intel Realsense cameras
-```
-
-The output will look something like this if you have two cameras connected:
-
-```
---- Detected Cameras ---
-Camera #0:
-  Name: OpenCV Camera @ 0
-  Type: OpenCV
-  Id: 0
-  Backend api: AVFOUNDATION
-  Default stream profile:
-    Format: 16.0
-    Width: 1920
-    Height: 1080
-    Fps: 15.0
---------------------
-(more cameras ...)
-```
-
-> [!WARNING]
-> When using Intel RealSense cameras in `macOS`, you could get this [error](https://github.com/IntelRealSense/librealsense/issues/12307): `Error finding RealSense cameras: failed to set power state`, this can be solved by running the same command with `sudo` permissions. Note that using RealSense cameras in `macOS` is unstable.
-
-## Use Cameras
-
-Below are two examples, demonstrating how to work with the API.
-
-- **Asynchronous frame capture** using an OpenCV-based camera
-- **Color and depth capture** using an Intel RealSense camera
-
-<hfoptions id="shell_restart">
-<hfoption id="Open CV Camera">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.cameras.opencv.camera_opencv import OpenCVCamera
-from lerobot.cameras.configs import ColorMode, Cv2Rotation
-
-# Construct an `OpenCVCameraConfig` with your desired FPS, resolution, color mode, and rotation.
-config = OpenCVCameraConfig(
-    index_or_path=0,
-    fps=15,
-    width=1920,
-    height=1080,
-    color_mode=ColorMode.RGB,
-    rotation=Cv2Rotation.NO_ROTATION
-)
-
-# Instantiate and connect an `OpenCVCamera`, performing a warm-up read (default).
-camera = OpenCVCamera(config)
-camera.connect()
-
-# Read frames asynchronously in a loop via `async_read(timeout_ms)`
-try:
-    for i in range(10):
-        frame = camera.async_read(timeout_ms=200)
-        print(f"Async frame {i} shape:", frame.shape)
-finally:
-    camera.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-<hfoption id="Intel Realsense Camera">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.cameras.realsense.configuration_realsense import RealSenseCameraConfig
-from lerobot.cameras.realsense.camera_realsense import RealSenseCamera
-from lerobot.cameras.configs import ColorMode, Cv2Rotation
-
-# Create a `RealSenseCameraConfig` specifying your camera’s serial number and enabling depth.
-config = RealSenseCameraConfig(
-    serial_number_or_name="233522074606",
-    fps=15,
-    width=640,
-    height=480,
-    color_mode=ColorMode.RGB,
-    use_depth=True,
-    rotation=Cv2Rotation.NO_ROTATION
-)
-
-# Instantiate and connect a `RealSenseCamera` with warm-up read (default).
-camera = RealSenseCamera(config)
-camera.connect()
-
-# Capture a color frame via `read()` and a depth map via `read_depth()`.
-try:
-    color_frame = camera.read()
-    depth_map = camera.read_depth()
-    print("Color frame shape:", color_frame.shape)
-    print("Depth map shape:", depth_map.shape)
-finally:
-    camera.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-## Use your phone
-
-<hfoptions id="use phone">
-<hfoption id="Mac">
-
-To use your iPhone as a camera on macOS, enable the Continuity Camera feature:
-
-- Ensure your Mac is running macOS 13 or later, and your iPhone is on iOS 16 or later.
-- Sign in both devices with the same Apple ID.
-- Connect your devices with a USB cable or turn on Wi-Fi and Bluetooth for a wireless connection.
-
-For more details, visit [Apple support](https://support.apple.com/en-gb/guide/mac-help/mchl77879b8a/mac).
-
-Your iPhone should be detected automatically when running the camera setup script in the next section.
-
-</hfoption>
-<hfoption id="Linux">
-
-If you want to use your phone as a camera on Linux, follow these steps to set up a virtual camera
-
-1. _Install `v4l2loopback-dkms` and `v4l-utils`_. Those packages are required to create virtual camera devices (`v4l2loopback`) and verify their settings with the `v4l2-ctl` utility from `v4l-utils`. Install them using:
-
-<!-- prettier-ignore-start -->
-```python
-sudo apt install v4l2loopback-dkms v4l-utils
-```
-<!-- prettier-ignore-end -->
-
-2. _Install [DroidCam](https://droidcam.app) on your phone_. This app is available for both iOS and Android.
-3. _Install [OBS Studio](https://obsproject.com)_. This software will help you manage the camera feed. Install it using [Flatpak](https://flatpak.org):
-
-<!-- prettier-ignore-start -->
-```python
-flatpak install flathub com.obsproject.Studio
-```
-<!-- prettier-ignore-end -->
-
-4. _Install the DroidCam OBS plugin_. This plugin integrates DroidCam with OBS Studio. Install it with:
-
-<!-- prettier-ignore-start -->
-```python
-flatpak install flathub com.obsproject.Studio.Plugin.DroidCam
-```
-<!-- prettier-ignore-end -->
-
-5. _Start OBS Studio_. Launch with:
-
-<!-- prettier-ignore-start -->
-```python
-flatpak run com.obsproject.Studio
-```
-<!-- prettier-ignore-end -->
-
-6. _Add your phone as a source_. Follow the instructions [here](https://droidcam.app/obs/usage). Be sure to set the resolution to `640x480`.
-7. _Adjust resolution settings_. In OBS Studio, go to `File > Settings > Video`. Change the `Base(Canvas) Resolution` and the `Output(Scaled) Resolution` to `640x480` by manually typing it in.
-8. _Start virtual camera_. In OBS Studio, follow the instructions [here](https://obsproject.com/kb/virtual-camera-guide).
-9. _Verify the virtual camera setup_. Use `v4l2-ctl` to list the devices:
-
-<!-- prettier-ignore-start -->
-```python
-v4l2-ctl --list-devices
-```
-<!-- prettier-ignore-end -->
-
-You should see an entry like:
-
-```
-VirtualCam (platform:v4l2loopback-000):
-/dev/video1
-```
-
-10. _Check the camera resolution_. Use `v4l2-ctl` to ensure that the virtual camera output resolution is `640x480`. Change `/dev/video1` to the port of your virtual camera from the output of `v4l2-ctl --list-devices`.
-
-<!-- prettier-ignore-start -->
-```python
-v4l2-ctl -d /dev/video1 --get-fmt-video
-```
-<!-- prettier-ignore-end -->
-
-You should see an entry like:
-
-```
->>> Format Video Capture:
->>>	Width/Height      : 640/480
->>>	Pixel Format      : 'YUYV' (YUYV 4:2:2)
-```
-
-Troubleshooting: If the resolution is not correct you will have to delete the Virtual Camera port and try again as it cannot be changed.
-
-If everything is set up correctly, you can proceed with the rest of the tutorial.
-
-</hfoption>
-</hfoptions>

docs/source/contributing.md

@@ -1 +0,0 @@
-../../CONTRIBUTING.md

docs/source/feetech.mdx

@@ -1,71 +0,0 @@
-# Feetech Motor Firmware Update
-
-This tutorial guides you through updating the firmware of Feetech motors using the official Feetech software.
-
-## Prerequisites
-
-- Windows computer (Feetech software is only available for Windows)
-- Feetech motor control board
-- USB cable to connect the control board to your computer
-- Feetech motors connected to the control board
-
-## Step 1: Download Feetech Software
-
-1. Visit the official Feetech software download page: [https://www.feetechrc.com/software.html](https://www.feetechrc.com/software.html)
-2. Download the latest version of the Feetech debugging software (FD)
-3. Install the software on your Windows computer
-
-## Step 2: Hardware Setup
-
-1. Connect your Feetech motors to the motor control board
-2. Connect the motor control board to your Windows computer via USB cable
-3. Ensure power is supplied to the motors
-
-## Step 3: Configure Connection
-
-1. Launch the Feetech debugging software
-2. Select the correct COM port from the port dropdown menu
-   - If unsure which port to use, check Windows Device Manager under "Ports (COM & LPT)"
-3. Set the appropriate baud rate (typically 1000000 for most Feetech motors)
-4. Click "Open" to establish communication with the control board
-
-## Step 4: Scan for Motors
-
-1. Once connected, click the "Search" button to detect all connected motors
-2. The software will automatically discover and list all motors on the bus
-3. Each motor will appear with its ID number
-
-## Step 5: Update Firmware
-
-For each motor you want to update:
-
-1. **Select the motor** from the list by clicking on it
-2. **Click on Upgrade tab**:
-3. **Click on Online button**:
-   - If an potential firmware update is found, it will be displayed in the box
-4. **Click on Upgrade button**:
-   - The update progress will be displayed
-
-## Step 6: Verify Update
-
-1. After the update completes, the software should automatically refresh the motor information
-2. Verify that the firmware version has been updated to the expected version
-
-## Important Notes
-
-⚠️ **Warning**: Do not disconnect power or USB during firmware updates, it will potentially brick the motor.
-
-## Bonus: Motor Debugging on Linux/macOS
-
-For debugging purposes only, you can use the open-source Feetech Debug Tool:
-
-- **Repository**: [FT_SCServo_Debug_Qt](https://github.com/CarolinePascal/FT_SCServo_Debug_Qt/tree/fix/port-search-timer)
-
-### Installation Instructions
-
-Follow the instructions in the repository to install the tool, for Ubuntu you can directly install it, for MacOS you need to build it from source.
-
-**Limitations:**
-
-- This tool is for debugging and parameter adjustment only
-- Firmware updates must still be done on Windows with official Feetech software

docs/source/getting_started_real_world_robot.mdx

@@ -0,0 +1,370 @@
+# Getting Started with Real-World Robots
+
+This tutorial will explain you how to train a neural network to autonomously control a real robot.
+
+**You'll learn:**
+1. How to record and visualize your dataset.
+2. How to train a policy using your data and prepare it for evaluation.
+3. How to evaluate your policy and visualize the results.
+
+By following these steps, you'll be able to replicate tasks like picking up a Lego block and placing it in a bin with a high success rate, as demonstrated in [this video](https://x.com/RemiCadene/status/1814680760592572934).
+
+This tutorial is specifically made for the affordable [SO-101](https://github.com/TheRobotStudio/SO-ARM100) robot, but it contains additional information to be easily adapted to various types of robots like [Aloha bimanual robot](https://aloha-2.github.io) by changing some configurations. The SO-101 consists of a leader arm and a follower arm, each with 6 motors. It can work with one or several cameras to record the scene, which serve as visual sensors for the robot.
+
+During the data collection phase, you will control the follower arm by moving the leader arm. This process is known as "teleoperation." This technique is used to collect robot trajectories. Afterward, you'll train a neural network to imitate these trajectories and deploy the network to enable your robot to operate autonomously.
+
+If you encounter any issues at any step of the tutorial, feel free to seek help on [Discord](https://discord.com/invite/s3KuuzsPFb) or don't hesitate to iterate with us on the tutorial by creating issues or pull requests.
+
+## Setup and Calibrate
+
+If you haven't yet setup and calibrate the SO-101 follow these steps:
+1. [Find ports and update config file](./assemble_so101#find-the-usb-ports-associated-to-each-arm)
+2. [Calibrate](./assemble_so101#calibrate)
+
+## Teleoperate
+
+Run this simple script to teleoperate your robot (it won't connect and display the cameras):
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so101 \
+  --robot.cameras='{}' \
+  --control.type=teleoperate
+```
+
+The teleoperate command will automatically:
+1. Identify any missing calibrations and initiate the calibration procedure.
+2. Connect the robot and start teleoperation.
+
+## Setup Cameras
+
+To connect a camera you have three options:
+1. OpenCVCamera which allows us to use any camera: usb, realsense, laptop webcam
+2. iPhone camera with MacOS
+3. Phone camera on Linux
+
+### Use OpenCVCamera
+
+The [`OpenCVCamera`](../lerobot/common/robot_devices/cameras/opencv.py) class allows you to efficiently record frames from most cameras using the [`opencv2`](https://docs.opencv.org) library.  For more details on compatibility, see [Video I/O with OpenCV Overview](https://docs.opencv.org/4.x/d0/da7/videoio_overview.html).
+
+To instantiate an [`OpenCVCamera`](../lerobot/common/robot_devices/cameras/opencv.py), you need a camera index (e.g. `OpenCVCamera(camera_index=0)`). When you only have one camera like a webcam of a laptop, the camera index is usually `0` but it might differ, and the camera index might change if you reboot your computer or re-plug your camera. This behavior depends on your operating system.
+
+To find the camera indices, run the following utility script, which will save a few frames from each detected camera:
+```bash
+python lerobot/common/robot_devices/cameras/opencv.py \
+    --images-dir outputs/images_from_opencv_cameras
+```
+
+The output will look something like this if you have two cameras connected:
+```
+Mac or Windows detected. Finding available camera indices through scanning all indices from 0 to 60
+[...]
+Camera found at index 0
+Camera found at index 1
+[...]
+Connecting cameras
+OpenCVCamera(0, fps=30.0, width=1920.0, height=1080.0, color_mode=rgb)
+OpenCVCamera(1, fps=24.0, width=1920.0, height=1080.0, color_mode=rgb)
+Saving images to outputs/images_from_opencv_cameras
+Frame: 0000	Latency (ms): 39.52
+[...]
+Frame: 0046	Latency (ms): 40.07
+Images have been saved to outputs/images_from_opencv_cameras
+```
+
+Check the saved images in `outputs/images_from_opencv_cameras` to identify which camera index corresponds to which physical camera (e.g. `0` for `camera_00` or `1` for `camera_01`):
+```
+camera_00_frame_000000.png
+[...]
+camera_00_frame_000047.png
+camera_01_frame_000000.png
+[...]
+camera_01_frame_000047.png
+```
+
+Note: Some cameras may take a few seconds to warm up, and the first frame might be black or green.
+
+Now that you have the camera indexes, you should specify the camera's in the config.
+
+### Use your phone
+<hfoptions id="use phone">
+<hfoption id="Mac">
+
+To use your iPhone as a camera on macOS, enable the Continuity Camera feature:
+- Ensure your Mac is running macOS 13 or later, and your iPhone is on iOS 16 or later.
+- Sign in both devices with the same Apple ID.
+- Connect your devices with a USB cable or turn on Wi-Fi and Bluetooth for a wireless connection.
+
+For more details, visit [Apple support](https://support.apple.com/en-gb/guide/mac-help/mchl77879b8a/mac).
+
+Your iPhone should be detected automatically when running the camera setup script in the next section.
+
+</hfoption>
+<hfoption id="Linux">
+
+If you want to use your phone as a camera on Linux, follow these steps to set up a virtual camera
+
+1. *Install `v4l2loopback-dkms` and `v4l-utils`*. Those packages are required to create virtual camera devices (`v4l2loopback`) and verify their settings with the `v4l2-ctl` utility from `v4l-utils`. Install them using:
+```python
+sudo apt install v4l2loopback-dkms v4l-utils
+```
+2. *Install [DroidCam](https://droidcam.app) on your phone*. This app is available for both iOS and Android.
+3. *Install [OBS Studio](https://obsproject.com)*. This software will help you manage the camera feed. Install it using [Flatpak](https://flatpak.org):
+```python
+flatpak install flathub com.obsproject.Studio
+```
+4. *Install the DroidCam OBS plugin*. This plugin integrates DroidCam with OBS Studio. Install it with:
+```python
+flatpak install flathub com.obsproject.Studio.Plugin.DroidCam
+```
+5. *Start OBS Studio*. Launch with:
+```python
+flatpak run com.obsproject.Studio
+```
+6. *Add your phone as a source*. Follow the instructions [here](https://droidcam.app/obs/usage). Be sure to set the resolution to `640x480`.
+7. *Adjust resolution settings*. In OBS Studio, go to `File > Settings > Video`. Change the `Base(Canvas) Resolution` and the `Output(Scaled) Resolution` to `640x480` by manually typing it in.
+8. *Start virtual camera*. In OBS Studio, follow the instructions [here](https://obsproject.com/kb/virtual-camera-guide).
+9. *Verify the virtual camera setup*. Use `v4l2-ctl` to list the devices:
+```python
+v4l2-ctl --list-devices
+```
+You should see an entry like:
+```
+VirtualCam (platform:v4l2loopback-000):
+/dev/video1
+```
+10. *Check the camera resolution*. Use `v4l2-ctl` to ensure that the virtual camera output resolution is `640x480`. Change `/dev/video1` to the port of your virtual camera from the output of `v4l2-ctl --list-devices`.
+```python
+v4l2-ctl -d /dev/video1 --get-fmt-video
+```
+You should see an entry like:
+```
+>>> Format Video Capture:
+>>>	Width/Height      : 640/480
+>>>	Pixel Format      : 'YUYV' (YUYV 4:2:2)
+```
+
+Troubleshooting: If the resolution is not correct you will have to delete the Virtual Camera port and try again as it cannot be changed.
+
+If everything is set up correctly, you can proceed with the rest of the tutorial.
+
+</hfoption>
+</hfoptions>
+
+## Teleoperate with cameras
+
+We can now teleoperate again while at the same time visualizing the cameras and joint positions with `rerun`.
+
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so101 \
+  --control.type=teleoperate
+  --control.display_data=true
+```
+
+## Record a dataset
+
+Once you're familiar with teleoperation, you can record your first dataset with SO-101.
+
+We use the Hugging Face hub features for uploading your dataset. If you haven't previously used the Hub, make sure you can login via the cli using a write-access token, this token can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens).
+
+Add your token to the cli by running this command:
+```bash
+huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
+```
+
+Then store your Hugging Face repository name in a variable:
+```bash
+HF_USER=$(huggingface-cli whoami | head -n 1)
+echo $HF_USER
+```
+
+Now you can record a dataset, to record 2 episodes and upload your dataset to the hub execute this command:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so101 \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.repo_id=${HF_USER}/so101_test \
+  --control.tags='["so101","tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=2 \
+  --control.push_to_hub=true
+```
+
+You will see a lot of lines appearing like this one:
+```
+INFO 2024-08-10 15:02:58 ol_robot.py:219 dt:33.34 (30.0hz) dtRlead: 5.06 (197.5hz) dtWfoll: 0.25 (3963.7hz) dtRfoll: 6.22 (160.7hz) dtRlaptop: 32.57 (30.7hz) dtRphone: 33.84 (29.5hz)
+```
+
+| Field | Meaning |
+|:---|:---|
+| `2024-08-10 15:02:58` | Timestamp when `print` was called. |
+| `ol_robot.py:219` | Source file and line number of the `print` call (`lerobot/scripts/control_robot.py` at line `219`). |
+| `dt: 33.34 (30.0 Hz)` | Delta time (ms) between teleop steps (target: 30.0 Hz, `--fps 30`). Yellow if step is too slow. |
+| `dtRlead: 5.06 (197.5 Hz)` | Delta time (ms) for reading present position from the **leader arm**. |
+| `dtWfoll: 0.25 (3963.7 Hz)` | Delta time (ms) for writing goal position to the **follower arm** (asynchronous). |
+| `dtRfoll: 6.22 (160.7 Hz)` | Delta time (ms) for reading present position from the **follower arm**. |
+| `dtRlaptop: 32.57 (30.7 Hz)` | Delta time (ms) for capturing an image from the **laptop camera** (async thread). |
+| `dtRphone: 33.84 (29.5 Hz)` | Delta time (ms) for capturing an image from the **phone camera** (async thread). |
+
+
+#### Dataset upload
+Locally your dataset is stored in this folder: `~/.cache/huggingface/lerobot/{repo-id}` (e.g. `data/cadene/so101_test`). At the end of data recording, your dataset will be uploaded on your Hugging Face page (e.g. https://huggingface.co/datasets/cadene/so101_test) that you can obtain by running:
+```bash
+echo https://huggingface.co/datasets/${HF_USER}/so101_test
+```
+Your dataset will be automatically tagged with `LeRobot` for the community to find it easily, and you can also add custom tags (in this case `tutorial` for example).
+
+You can look for other LeRobot datasets on the hub by searching for `LeRobot` [tags](https://huggingface.co/datasets?other=LeRobot).
+
+#### Record function
+
+The `record` function provides a suite of tools for capturing and managing data during robot operation:
+
+##### 1. Frame Capture and Video Encoding
+- Frames from cameras are saved to disk during recording.
+- At the end of each episode, frames are encoded into video files.
+
+##### 2. Data Storage
+- Data is stored using the `LeRobotDataset` format.
+- By default, the dataset is pushed to your Hugging Face page.
+  - To disable uploading, use `--control.push_to_hub=false`.
+
+##### 3. Checkpointing and Resuming
+- Checkpoints are automatically created during recording.
+- If an issue occurs, you can resume by re-running the same command with `--control.resume=true`.
+- To start recording from scratch, **manually delete** the dataset directory.
+
+##### 4. Recording Parameters
+Set the flow of data recording using command-line arguments:
+- `--control.warmup_time_s=10`
+  Number of seconds before starting data collection (default: **10 seconds**).
+  Allows devices to warm up and synchronize.
+- `--control.episode_time_s=60`
+  Duration of each data recording episode (default: **60 seconds**).
+- `--control.reset_time_s=60`
+  Duration for resetting the environment after each episode (default: **60 seconds**).
+- `--control.num_episodes=50`
+  Total number of episodes to record (default: **50**).
+
+##### 5. Keyboard Controls During Recording
+Control the data recording flow using keyboard shortcuts:
+- Press **Right Arrow (`→`)**: Early stop the current episode or reset time and move to the next.
+- Press **Left Arrow (`←`)**: Cancel the current episode and re-record it.
+- Press **Escape (`ESC`)**: Immediately stop the session, encode videos, and upload the dataset.
+
+#### Tips for gathering data
+
+Once you're comfortable with data recording, you can create a larger dataset for training. A good starting task is grasping an object at different locations and placing it in a bin. We suggest recording at least 50 episodes, with 10 episodes per location. Keep the cameras fixed and maintain consistent grasping behavior throughout the recordings. Also make sure the object you are manipulating is visible on the camera's. A good rule of thumb is you should be able to do the task yourself by only looking at the camera images.
+
+In the following sections, you’ll train your neural network. After achieving reliable grasping performance, you can start introducing more variations during data collection, such as additional grasp locations, different grasping techniques, and altering camera positions.
+
+Avoid adding too much variation too quickly, as it may hinder your results.
+
+
+#### Troubleshooting:
+- On Linux, if the left and right arrow keys and escape key don't have any effect during data recording, make sure you've set the `$DISPLAY` environment variable. See [pynput limitations](https://pynput.readthedocs.io/en/latest/limitations.html#linux).
+
+## Visualize a dataset
+
+If you uploaded your dataset to the hub with `--control.push_to_hub=true`, you can [visualize your dataset online](https://huggingface.co/spaces/lerobot/visualize_dataset) by copy pasting your repo id given by:
+```bash
+echo ${HF_USER}/so101_test
+```
+
+If you didn't upload with `--control.push_to_hub=false`, you can visualize it locally with (via a window in the browser `http://127.0.0.1:9090` with the visualization tool):
+```bash
+python lerobot/scripts/visualize_dataset_html.py \
+  --repo-id ${HF_USER}/so101_test \
+  --local-files-only 1
+```
+
+This will launch a local web server that looks like this:
+<div style="text-align:center;">
+  <img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/visualize_dataset_html.webp?raw=true" alt="Koch v1.1 leader and follower arms" title="Koch v1.1 leader and follower arms" width="100%"></img>
+</div>
+
+## Replay an episode
+
+A useful feature is the `replay` function, which allows to replay on your robot any episode that you've recorded or episodes from any dataset out there. This function helps you test the repeatability of your robot's actions and assess transferability across robots of the same model.
+
+You can replay the first episode on your robot with:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so101 \
+  --control.type=replay \
+  --control.fps=30 \
+  --control.repo_id=${HF_USER}/so101_test \
+  --control.episode=0
+```
+
+Your robot should replicate movements similar to those you recorded. For example, check out [this video](https://x.com/RemiCadene/status/1793654950905680090) where we use `replay` on a Aloha robot from [Trossen Robotics](https://www.trossenrobotics.com).
+
+## Train a policy
+
+To train a policy to control your robot, use the [`python lerobot/scripts/train.py`](../lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
+```bash
+python lerobot/scripts/train.py \
+  --dataset.repo_id=${HF_USER}/so101_test \
+  --policy.type=act \
+  --output_dir=outputs/train/act_so101_test \
+  --job_name=act_so101_test \
+  --policy.device=cuda \
+  --wandb.enable=true
+```
+
+Let's explain the command:
+1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/so101_test`.
+2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor states, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
+4. We provided `policy.device=cuda` since we are training on a Nvidia GPU, but you could use `policy.device=mps` to train on Apple silicon.
+5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
+
+Training should take several hours. You will find checkpoints in `outputs/train/act_so101_test/checkpoints`.
+
+To resume training from a checkpoint, below is an example command to resume from `last` checkpoint of the `act_so101_test` policy:
+```bash
+python lerobot/scripts/train.py \
+  --config_path=outputs/train/act_so101_test/checkpoints/last/pretrained_model/train_config.json \
+  --resume=true
+```
+
+#### Upload policy checkpoints
+
+Once training is done, upload the latest checkpoint with:
+```bash
+huggingface-cli upload ${HF_USER}/act_so101_test \
+  outputs/train/act_so101_test/checkpoints/last/pretrained_model
+```
+
+You can also upload intermediate checkpoints with:
+```bash
+CKPT=010000
+huggingface-cli upload ${HF_USER}/act_so101_test${CKPT} \
+  outputs/train/act_so101_test/checkpoints/${CKPT}/pretrained_model
+```
+
+## Evaluate your policy
+
+You can use the `record` function from [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) but with a policy checkpoint as input. For instance, run this command to record 10 evaluation episodes:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=so101 \
+  --control.type=record \
+  --control.fps=30 \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.repo_id=${HF_USER}/eval_act_so101_test \
+  --control.tags='["tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=10 \
+  --control.push_to_hub=true \
+  --control.policy.path=outputs/train/act_so101_test/checkpoints/last/pretrained_model
+```
+
+As you can see, it's almost the same command as previously used to record your training dataset. Two things changed:
+1. There is an additional `--control.policy.path` argument which indicates the path to your policy checkpoint with  (e.g. `outputs/train/eval_act_so101_test/checkpoints/last/pretrained_model`). You can also use the model repository if you uploaded a model checkpoint to the hub (e.g. `${HF_USER}/act_so101_test`).
+2. The name of dataset begins by `eval` to reflect that you are running inference (e.g. `${HF_USER}/eval_act_so101_test`).

docs/source/hilserl.mdx

@@ -1,927 +0,0 @@
-# HIL-SERL Real Robot Training Workflow Guide
-
-In this tutorial you will go through the full Human-in-the-Loop Sample-Efficient Reinforcement Learning (HIL-SERL) workflow using LeRobot. You will master training a policy with RL on a real robot in just a few hours.
-
-HIL-SERL is a sample-efficient reinforcement learning algorithm that combines human demonstrations with online learning and human interventions. The approach starts from a small set of human demonstrations, uses them to train a reward classifier, and then employs an actor-learner architecture where humans can intervene during policy execution to guide exploration and correct unsafe behaviors. In this tutorial, you'll use a gamepad to provide interventions and control the robot during the learning process.
-
-It combines three key ingredients:
-
-1. **Offline demonstrations & reward classifier:** a handful of human-teleop episodes plus a vision-based success detector give the policy a shaped starting point.
-
-2. **On-robot actor / learner loop with human interventions:** a distributed Soft Actor Critic (SAC) learner updates the policy while an actor explores on the physical robot; the human can jump in at any time to correct dangerous or unproductive behaviour.
-
-3. **Safety & efficiency tools:** joint/end-effector (EE) bounds, crop region of interest (ROI) preprocessing and WandB monitoring keep the data useful and the hardware safe.
-
-Together these elements let HIL-SERL reach near-perfect task success and faster cycle times than imitation-only baselines.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/hilserl-main-figure.png"
-    alt="HIL-SERL workflow"
-    title="HIL-SERL workflow"
-    width="100%"
-  ></img>
-</p>
-
-<p align="center">
-  <i>HIL-SERL workflow, Luo et al. 2024</i>
-</p>
-
-This guide provides step-by-step instructions for training a robot policy using LeRobot's HilSerl implementation to train on a real robot.
-
-## What do I need?
-
-- A gamepad (recommended) or keyboard to control the robot
-- A Nvidia GPU
-- A real robot with a follower and leader arm (optional if you use the keyboard or the gamepad)
-- A URDF file for the robot for the kinematics package (check `lerobot/model/kinematics.py`)
-
-## What kind of tasks can I train?
-
-One can use HIL-SERL to train on a variety of manipulation tasks. Some recommendations:
-
-- Start with a simple task to understand how the system works.
-  - Push cube to a goal region
-  - Pick and lift cube with the gripper
-- Avoid extremely long horizon tasks. Focus on tasks that can be completed in 5-10 seconds.
-- Once you have a good idea of how the system works, you can try more complex tasks and longer horizons.
-  - Pick and place cube
-  - Bimanual tasks to pick objects with two arms
-  - Hand-over tasks to transfer objects from one arm to another
-  - Go crazy!
-
-## Install LeRobot with HIL-SERL
-
-To install LeRobot with HIL-SERL, you need to install the `hilserl` extra.
-
-```bash
-pip install -e ".[hilserl]"
-```
-
-## Real Robot Training Workflow
-
-### Understanding Configuration
-
-The training process begins with proper configuration for the HILSerl environment. The main configuration class is `GymManipulatorConfig` in `lerobot/scripts/rl/gym_manipulator.py`, which contains nested `HILSerlRobotEnvConfig` and `DatasetConfig`. The configuration is organized into focused, nested sub-configs:
-
-<!-- prettier-ignore-start -->
-```python
-class GymManipulatorConfig:
-    env: HILSerlRobotEnvConfig    # Environment configuration (nested)
-    dataset: DatasetConfig    # Dataset recording/replay configuration (nested)
-    mode: str | None = None    # "record", "replay", or None (for training)
-    device: str = "cpu"    # Compute device
-
-class HILSerlRobotEnvConfig(EnvConfig):
-    robot: RobotConfig | None = None    # Main robot agent (defined in `lerobot/robots`)
-    teleop: TeleoperatorConfig | None = None    # Teleoperator agent, e.g., gamepad or leader arm
-    processor: HILSerlProcessorConfig    # Processing pipeline configuration (nested)
-    name: str = "real_robot"    # Environment name
-    task: str | None = None    # Task identifier
-    fps: int = 10    # Control frequency
-
-# Nested processor configuration
-class HILSerlProcessorConfig:
-    control_mode: str = "gamepad"    # Control mode
-    observation: ObservationConfig | None = None    # Observation processing settings
-    image_preprocessing: ImagePreprocessingConfig | None = None    # Image crop/resize settings
-    gripper: GripperConfig | None = None    # Gripper control and penalty settings
-    reset: ResetConfig | None = None    # Environment reset and timing settings
-    inverse_kinematics: InverseKinematicsConfig | None = None    # IK processing settings
-    reward_classifier: RewardClassifierConfig | None = None    # Reward classifier settings
-    max_gripper_pos: float | None = 100.0    # Maximum gripper position
-
-# Sub-configuration classes
-class ObservationConfig:
-    add_joint_velocity_to_observation: bool = False    # Add joint velocities to state
-    add_current_to_observation: bool = False    # Add motor currents to state
-    add_ee_pose_to_observation: bool = False    # Add end-effector pose to state
-    display_cameras: bool = False    # Display camera feeds during execution
-
-class ImagePreprocessingConfig:
-    crop_params_dict: dict[str, tuple[int, int, int, int]] | None = None    # Image cropping parameters
-    resize_size: tuple[int, int] | None = None    # Target image size
-
-class GripperConfig:
-    use_gripper: bool = True    # Enable gripper control
-    gripper_penalty: float = 0.0    # Penalty for inappropriate gripper usage
-    gripper_penalty_in_reward: bool = False    # Include gripper penalty in reward
-
-class ResetConfig:
-    fixed_reset_joint_positions: Any | None = None    # Joint positions for reset
-    reset_time_s: float = 5.0    # Time to wait during reset
-    control_time_s: float = 20.0    # Maximum episode duration
-    terminate_on_success: bool = True    # Whether to terminate episodes on success detection
-
-class InverseKinematicsConfig:
-    urdf_path: str | None = None    # Path to robot URDF file
-    target_frame_name: str | None = None    # End-effector frame name
-    end_effector_bounds: dict[str, list[float]] | None = None    # EE workspace bounds
-    end_effector_step_sizes: dict[str, float] | None = None    # EE step sizes per axis
-
-class RewardClassifierConfig:
-    pretrained_path: str | None = None    # Path to pretrained reward classifier
-    success_threshold: float = 0.5    # Success detection threshold
-    success_reward: float = 1.0    # Reward value for successful episodes
-
-# Dataset configuration
-class DatasetConfig:
-    repo_id: str    # LeRobot dataset repository ID
-    task: str    # Task identifier
-    root: str | None = None    # Local dataset root directory
-    num_episodes_to_record: int = 5    # Number of episodes for recording
-    replay_episode: int | None = None    # Episode index for replay
-    push_to_hub: bool = False    # Whether to push datasets to Hub
-```
-<!-- prettier-ignore-end -->
-
-### Processor Pipeline Architecture
-
-HIL-SERL uses a modular processor pipeline architecture that processes robot observations and actions through a series of composable steps. The pipeline is divided into two main components:
-
-#### Environment Processor Pipeline
-
-The environment processor (`env_processor`) handles incoming observations and environment state:
-
-1. **VanillaObservationProcessor**: Converts raw robot observations into standardized format
-2. **JointVelocityProcessor** (optional): Adds joint velocity information to observations
-3. **MotorCurrentProcessor** (optional): Adds motor current readings to observations
-4. **ForwardKinematicsJointsToEE** (optional): Computes end-effector pose from joint positions
-5. **ImageCropResizeProcessor** (optional): Crops and resizes camera images
-6. **TimeLimitProcessor** (optional): Enforces episode time limits
-7. **GripperPenaltyProcessor** (optional): Applies penalties for inappropriate gripper usage
-8. **RewardClassifierProcessor** (optional): Automated reward detection using vision models
-9. **ToBatchProcessor**: Converts data to batch format for neural network processing
-10. **DeviceProcessor**: Moves data to the specified compute device (CPU/GPU)
-
-#### Action Processor Pipeline
-
-The action processor (`action_processor`) handles outgoing actions and human interventions:
-
-1. **AddTeleopActionAsComplimentaryData**: Captures teleoperator actions for logging
-2. **AddTeleopEventsAsInfo**: Records intervention events and episode control signals
-3. **AddRobotObservationAsComplimentaryData**: Stores raw robot state for processing
-4. **InterventionActionProcessor**: Handles human interventions and episode termination
-5. **Inverse Kinematics Pipeline** (when enabled):
-   - **MapDeltaActionToRobotAction**: Converts delta actions to robot action format
-   - **EEReferenceAndDelta**: Computes end-effector reference and delta movements
-   - **EEBoundsAndSafety**: Enforces workspace safety bounds
-   - **InverseKinematicsEEToJoints**: Converts end-effector actions to joint targets
-   - **GripperVelocityToJoint**: Handles gripper control commands
-
-#### Configuration Examples
-
-**Basic Observation Processing**:
-
-```json
-{
-  "env": {
-    "processor": {
-      "observation": {
-        "add_joint_velocity_to_observation": true,
-        "add_current_to_observation": false,
-        "display_cameras": false
-      }
-    }
-  }
-}
-```
-
-**Image Processing**:
-
-```json
-{
-  "env": {
-    "processor": {
-      "image_preprocessing": {
-        "crop_params_dict": {
-          "observation.images.front": [180, 250, 120, 150],
-          "observation.images.side": [180, 207, 180, 200]
-        },
-        "resize_size": [128, 128]
-      }
-    }
-  }
-}
-```
-
-**Inverse Kinematics Setup**:
-
-```json
-{
-  "env": {
-    "processor": {
-      "inverse_kinematics": {
-        "urdf_path": "path/to/robot.urdf",
-        "target_frame_name": "end_effector",
-        "end_effector_bounds": {
-          "min": [0.16, -0.08, 0.03],
-          "max": [0.24, 0.2, 0.1]
-        },
-        "end_effector_step_sizes": {
-          "x": 0.02,
-          "y": 0.02,
-          "z": 0.02
-        }
-      }
-    }
-  }
-}
-```
-
-### Advanced Observation Processing
-
-The HIL-SERL framework supports additional observation processing features that can improve policy learning:
-
-#### Joint Velocity Processing
-
-Enable joint velocity estimation to provide the policy with motion information:
-
-```json
-{
-  "env": {
-    "processor": {
-      "observation": {
-        "add_joint_velocity_to_observation": true
-      }
-    }
-  }
-}
-```
-
-This processor:
-
-- Estimates joint velocities using finite differences between consecutive joint position readings
-- Adds velocity information to the observation state vector
-- Useful for policies that need motion awareness for dynamic tasks
-
-#### Motor Current Processing
-
-Monitor motor currents to detect contact forces and load conditions:
-
-```json
-{
-  "env": {
-    "processor": {
-      "observation": {
-        "add_current_to_observation": true
-      }
-    }
-  }
-}
-```
-
-This processor:
-
-- Reads motor current values from the robot's control system
-- Adds current measurements to the observation state vector
-- Helps detect contact events, object weights, and mechanical resistance
-- Useful for contact-rich manipulation tasks
-
-#### Combined Observation Processing
-
-You can enable multiple observation processing features simultaneously:
-
-```json
-{
-  "env": {
-    "processor": {
-      "observation": {
-        "add_joint_velocity_to_observation": true,
-        "add_current_to_observation": true,
-        "add_ee_pose_to_observation": false,
-        "display_cameras": false
-      }
-    }
-  }
-}
-```
-
-**Note**: Enabling additional observation features increases the state space dimensionality, which may require adjusting your policy network architecture and potentially collecting more training data.
-
-### Finding Robot Workspace Bounds
-
-Before collecting demonstrations, you need to determine the appropriate operational bounds for your robot.
-
-This helps simplify the problem of learning on the real robot in two ways: 1) by limiting the robot's operational space to a specific region that solves the task and avoids unnecessary or unsafe exploration, and 2) by allowing training in end-effector space rather than joint space. Empirically, learning in joint space for reinforcement learning in manipulation is often a harder problem - some tasks are nearly impossible to learn in joint space but become learnable when the action space is transformed to end-effector coordinates.
-
-**Using find_joint_limits.py**
-
-This script helps you find the safe operational bounds for your robot's end-effector. Given that you have a follower and leader arm, you can use the script to find the bounds for the follower arm that will be applied during training.
-Bounding the action space will reduce the redundant exploration of the agent and guarantees safety.
-
-```bash
-python -m lerobot.scripts.find_joint_limits \
-    --robot.type=so100_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=black \
-    --teleop.type=so100_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=blue
-```
-
-**Workflow**
-
-1. Run the script and move the robot through the space that solves the task
-2. The script will record the minimum and maximum end-effector positions and the joint angles and prints them to the console, for example:
-   ```
-   Max ee position [0.2417 0.2012 0.1027]
-   Min ee position [0.1663 -0.0823 0.0336]
-   Max joint positions [-20.0, -20.0, -20.0, -20.0, -20.0, -20.0]
-   Min joint positions [50.0, 50.0, 50.0, 50.0, 50.0, 50.0]
-   ```
-3. Use these values in the configuration of your teleoperation device (TeleoperatorConfig) under the `end_effector_bounds` field
-
-**Example Configuration**
-
-```json
-"end_effector_bounds": {
-    "max": [0.24, 0.20, 0.10],
-    "min": [0.16, -0.08, 0.03]
-}
-```
-
-### Collecting Demonstrations
-
-With the bounds defined, you can safely collect demonstrations for training. Training RL with off-policy algorithm allows us to use offline datasets collected in order to improve the efficiency of the learning process.
-
-**Setting Up Record Mode**
-
-Create a configuration file for recording demonstrations (or edit an existing one like [env_config_so100.json](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/env_config_so100.json)):
-
-1. Set `mode` to `"record"` at the root level
-2. Specify a unique `repo_id` for your dataset in the `dataset` section (e.g., "username/task_name")
-3. Set `num_episodes_to_record` in the `dataset` section to the number of demonstrations you want to collect
-4. Set `env.processor.image_preprocessing.crop_params_dict` to `{}` initially (we'll determine crops later)
-5. Configure `env.robot`, `env.teleop`, and other hardware settings in the `env` section
-
-Example configuration section:
-
-```json
-{
-  "env": {
-    "type": "gym_manipulator",
-    "name": "real_robot",
-    "fps": 10,
-    "processor": {
-      "control_mode": "gamepad",
-      "observation": {
-        "display_cameras": false
-      },
-      "image_preprocessing": {
-        "crop_params_dict": {},
-        "resize_size": [128, 128]
-      },
-      "gripper": {
-        "use_gripper": true,
-        "gripper_penalty": 0.0
-      },
-      "reset": {
-        "reset_time_s": 5.0,
-        "control_time_s": 20.0
-      }
-    },
-    "robot": {
-      // ... robot configuration ...
-    },
-    "teleop": {
-      // ... teleoperator configuration ...
-    }
-  },
-  "dataset": {
-    "repo_id": "username/pick_lift_cube",
-    "root": null,
-    "task": "pick_and_lift",
-    "num_episodes_to_record": 15,
-    "replay_episode": 0,
-    "push_to_hub": true
-  },
-  "mode": "record",
-  "device": "cpu"
-}
-```
-
-### Using a Teleoperation Device
-
-Along with your robot, you will need a teleoperation device to control it in order to collect datasets of your task and perform interventions during the online training.
-We support using a gamepad or a keyboard or the leader arm of the robot.
-
-HIL-Serl learns actions in the end-effector space of the robot. Therefore, the teleoperation will control the end-effector's x,y,z displacements.
-
-For that we need to define a version of the robot that takes actions in the end-effector space. Check the robot class `SO100FollowerEndEffector` and its configuration `SO100FollowerEndEffectorConfig` for the default parameters related to the end-effector space.
-
-<!-- prettier-ignore-start -->
-```python
-class SO100FollowerEndEffectorConfig(SO100FollowerConfig):
-    """Configuration for the SO100FollowerEndEffector robot."""
-
-    # Default bounds for the end-effector position (in meters)
-    end_effector_bounds: dict[str, list[float]] = field( # bounds for the end-effector in x,y,z direction
-        default_factory=lambda: {
-            "min": [-1.0, -1.0, -1.0],  # min x, y, z
-            "max": [1.0, 1.0, 1.0],  # max x, y, z
-        }
-    )
-
-    max_gripper_pos: float = 50 # maximum gripper position that the gripper will be open at
-
-    end_effector_step_sizes: dict[str, float] = field( # maximum step size for the end-effector in x,y,z direction
-        default_factory=lambda: {
-            "x": 0.02,
-            "y": 0.02,
-            "z": 0.02,
-        }
-    )
-```
-<!-- prettier-ignore-end -->
-
-The `Teleoperator` defines the teleoperation device. You can check the list of available teleoperators in `lerobot/teleoperators`.
-
-**Setting up the Gamepad**
-
-The gamepad provides a very convenient way to control the robot and the episode state.
-
-To setup the gamepad, you need to set the `control_mode` to `"gamepad"` and define the `teleop` section in the configuration file.
-
-```json
-{
-  "env": {
-    "teleop": {
-      "type": "gamepad",
-      "use_gripper": true
-    },
-    "processor": {
-      "control_mode": "gamepad",
-      "gripper": {
-        "use_gripper": true
-      }
-    }
-  }
-}
-```
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/gamepad_guide.jpg?raw=true"
-    alt="Figure shows the control mappings on a Logitech gamepad."
-    title="Gamepad Control Mapping"
-    width="100%"
-  ></img>
-</p>
-<p align="center">
-  <i>Gamepad button mapping for robot control and episode management</i>
-</p>
-
-**Setting up the SO101 leader**
-
-The SO101 leader arm has reduced gears that allows it to move and track the follower arm during exploration. Therefore, taking over is much smoother than the gearless SO100.
-
-To setup the SO101 leader, you need to set the `control_mode` to `"leader"` and define the `teleop` section in the configuration file.
-
-```json
-{
-  "env": {
-    "teleop": {
-      "type": "so101_leader",
-      "port": "/dev/tty.usbmodem585A0077921",
-      "use_degrees": true
-    },
-    "processor": {
-      "control_mode": "leader",
-      "gripper": {
-        "use_gripper": true
-      }
-    }
-  }
-}
-```
-
-In order to annotate the success/failure of the episode, **you will need** to use a keyboard to press `s` for success, `esc` for failure.
-During the online training, press `space` to take over the policy and `space` again to give the control back to the policy.
-
-<details>
-<summary><strong>Video: SO101 leader teleoperation</strong></summary>
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so101_leader_tutorial.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-<p align="center"><i>SO101 leader teleoperation example, the leader tracks the follower, press `space` to intervene</i></p>
-</details>
-
-**Recording Demonstrations**
-
-Start the recording process, an example of the config file can be found [here](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/env_config_so100.json):
-
-```bash
-python -m lerobot.scripts.rl.gym_manipulator --config_path src/lerobot/configs/env_config_so100.json
-```
-
-During recording:
-
-1. The robot will reset to the initial position defined in the configuration file `env.processor.reset.fixed_reset_joint_positions`
-2. Complete the task successfully
-3. The episode ends with a reward of 1 when you press the "success" button
-4. If the time limit is reached, or the fail button is pressed, the episode ends with a reward of 0
-5. You can rerecord an episode by pressing the "rerecord" button
-6. The process automatically continues to the next episode
-7. After recording all episodes, the dataset is pushed to the Hugging Face Hub (optional) and saved locally
-
-### Processing the Dataset
-
-After collecting demonstrations, process them to determine optimal camera crops.
-Reinforcement learning is sensitive to background distractions, so it is important to crop the images to the relevant workspace area.
-
-Visual RL algorithms learn directly from pixel inputs, making them vulnerable to irrelevant visual information. Background elements like changing lighting, shadows, people moving, or objects outside the workspace can confuse the learning process. Good ROI selection should:
-
-- Include only the essential workspace where the task happens
-- Capture the robot's end-effector and all objects involved in the task
-- Exclude unnecessary background elements and distractions
-
-Note: If you already know the crop parameters, you can skip this step and just set the `crop_params_dict` in the configuration file during recording.
-
-**Determining Crop Parameters**
-
-Use the `crop_dataset_roi.py` script to interactively select regions of interest in your camera images:
-
-```bash
-python -m lerobot.scripts.rl.crop_dataset_roi --repo-id username/pick_lift_cube
-```
-
-1. For each camera view, the script will display the first frame
-2. Draw a rectangle around the relevant workspace area
-3. Press 'c' to confirm the selection
-4. Repeat for all camera views
-5. The script outputs cropping parameters and creates a new cropped dataset
-
-Example output:
-
-```
-Selected Rectangular Regions of Interest (top, left, height, width):
-observation.images.side: [180, 207, 180, 200]
-observation.images.front: [180, 250, 120, 150]
-```
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/crop_dataset.gif"
-    width="600"
-  />
-</p>
-
-<p align="center">
-  <i>Interactive cropping tool for selecting regions of interest</i>
-</p>
-
-**Updating Configuration**
-
-Add these crop parameters to your training configuration:
-
-```json
-{
-  "env": {
-    "processor": {
-      "image_preprocessing": {
-        "crop_params_dict": {
-          "observation.images.side": [180, 207, 180, 200],
-          "observation.images.front": [180, 250, 120, 150]
-        },
-        "resize_size": [128, 128]
-      }
-    }
-  }
-}
-```
-
-**Recommended image resolution**
-
-Most vision-based policies have been validated on square inputs of either **128×128** (default) or **64×64** pixels. We therefore advise setting the resize_size parameter to [128, 128] – or [64, 64] if you need to save GPU memory and bandwidth. Other resolutions are possible but have not been extensively tested.
-
-### Training a Reward Classifier
-
-The reward classifier plays an important role in the HIL-SERL workflow by automating reward assignment and automatically detecting episode success. Instead of manually defining reward functions or relying on human feedback for every timestep, the reward classifier learns to predict success/failure from visual observations. This enables the RL algorithm to learn efficiently by providing consistent and automated reward signals based on the robot's camera inputs.
-
-This guide explains how to train a reward classifier for human-in-the-loop reinforcement learning implementation of LeRobot. Reward classifiers learn to predict the reward value given a state which can be used in an RL setup to train a policy.
-
-**Note**: Training a reward classifier is optional. You can start the first round of RL experiments by annotating the success manually with your gamepad or keyboard device.
-
-The reward classifier implementation in `modeling_classifier.py` uses a pretrained vision model to process the images. It can output either a single value for binary rewards to predict success/fail cases or multiple values for multi-class settings.
-
-**Collecting a Dataset for the reward classifier**
-
-Before training, you need to collect a dataset with labeled examples. The `record_dataset` function in `gym_manipulator.py` enables the process of collecting a dataset of observations, actions, and rewards.
-
-To collect a dataset, you need to modify some parameters in the environment configuration based on HILSerlRobotEnvConfig.
-
-```bash
-python -m lerobot.scripts.rl.gym_manipulator --config_path src/lerobot/configs/reward_classifier_train_config.json
-```
-
-**Key Parameters for Data Collection**
-
-- **mode**: set it to `"record"` to collect a dataset (at root level)
-- **dataset.repo_id**: `"hf_username/dataset_name"`, name of the dataset and repo on the hub
-- **dataset.num_episodes_to_record**: Number of episodes to record
-- **env.processor.reset.terminate_on_success**: Whether to automatically terminate episodes when success is detected (default: `true`)
-- **env.fps**: Number of frames per second to record
-- **dataset.push_to_hub**: Whether to push the dataset to the hub
-
-The `env.processor.reset.terminate_on_success` parameter allows you to control episode termination behavior. When set to `false`, episodes will continue even after success is detected, allowing you to collect more positive examples with the reward=1 label. This is crucial for training reward classifiers as it provides more success state examples in your dataset. When set to `true` (default), episodes terminate immediately upon success detection.
-
-**Important**: For reward classifier training, set `terminate_on_success: false` to collect sufficient positive examples. For regular HIL-SERL training, keep it as `true` to enable automatic episode termination when the task is completed successfully.
-
-Example configuration section for data collection:
-
-```json
-{
-  "env": {
-    "type": "gym_manipulator",
-    "name": "real_robot",
-    "fps": 10,
-    "processor": {
-      "reset": {
-        "reset_time_s": 5.0,
-        "control_time_s": 20.0,
-        "terminate_on_success": false
-      },
-      "gripper": {
-        "use_gripper": true
-      }
-    },
-    "robot": {
-      // ... robot configuration ...
-    },
-    "teleop": {
-      // ... teleoperator configuration ...
-    }
-  },
-  "dataset": {
-    "repo_id": "hf_username/dataset_name",
-    "dataset_root": "data/your_dataset",
-    "task": "reward_classifier_task",
-    "num_episodes_to_record": 20,
-    "replay_episode": null,
-    "push_to_hub": true
-  },
-  "mode": "record",
-  "device": "cpu"
-}
-```
-
-**Reward Classifier Configuration**
-
-The reward classifier is configured using `configuration_classifier.py`. Here are the key parameters:
-
-- **model_name**: Base model architecture (e.g., we mainly use `"helper2424/resnet10"`)
-- **model_type**: `"cnn"` or `"transformer"`
-- **num_cameras**: Number of camera inputs
-- **num_classes**: Number of output classes (typically 2 for binary success/failure)
-- **hidden_dim**: Size of hidden representation
-- **dropout_rate**: Regularization parameter
-- **learning_rate**: Learning rate for optimizer
-
-Example configuration for training the [reward classifier](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/reward_classifier_train_config.json):
-
-```json
-{
-  "policy": {
-    "type": "reward_classifier",
-    "model_name": "helper2424/resnet10",
-    "model_type": "cnn",
-    "num_cameras": 2,
-    "num_classes": 2,
-    "hidden_dim": 256,
-    "dropout_rate": 0.1,
-    "learning_rate": 1e-4,
-    "device": "cuda",
-    "use_amp": true,
-    "input_features": {
-      "observation.images.front": {
-        "type": "VISUAL",
-        "shape": [3, 128, 128]
-      },
-      "observation.images.side": {
-        "type": "VISUAL",
-        "shape": [3, 128, 128]
-      }
-    }
-  }
-}
-```
-
-**Training the Classifier**
-
-To train the classifier, use the `train.py` script with your configuration:
-
-```bash
-lerobot-train --config_path path/to/reward_classifier_train_config.json
-```
-
-**Deploying and Testing the Model**
-
-To use your trained reward classifier, configure the `HILSerlRobotEnvConfig` to use your model:
-
-<!-- prettier-ignore-start -->
-```python
-config = GymManipulatorConfig(
-    env=HILSerlRobotEnvConfig(
-        processor=HILSerlProcessorConfig(
-            reward_classifier=RewardClassifierConfig(
-                pretrained_path="path_to_your_pretrained_trained_model"
-            )
-        ),
-        # Other environment parameters
-    ),
-    dataset=DatasetConfig(...),
-    mode=None  # For training
-)
-```
-<!-- prettier-ignore-end -->
-
-or set the argument in the json config file.
-
-```json
-{
-  "env": {
-    "processor": {
-      "reward_classifier": {
-        "pretrained_path": "path_to_your_pretrained_model",
-        "success_threshold": 0.7,
-        "success_reward": 1.0
-      },
-      "reset": {
-        "terminate_on_success": true
-      }
-    }
-  }
-}
-```
-
-Run `gym_manipulator.py` to test the model.
-
-```bash
-python -m lerobot.scripts.rl.gym_manipulator --config_path path/to/env_config.json
-```
-
-The reward classifier will automatically provide rewards based on the visual input from the robot's cameras.
-
-**Example Workflow for training the reward classifier**
-
-1. **Create the configuration files**:
-   Create the necessary json configuration files for the reward classifier and the environment. Check the examples [here](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/tree/main).
-
-2. **Collect a dataset**:
-
-   ```bash
-   python -m lerobot.scripts.rl.gym_manipulator --config_path src/lerobot/configs/env_config.json
-   ```
-
-3. **Train the classifier**:
-
-   ```bash
-   lerobot-train --config_path src/lerobot/configs/reward_classifier_train_config.json
-   ```
-
-4. **Test the classifier**:
-   ```bash
-   python -m lerobot.scripts.rl.gym_manipulator --config_path src/lerobot/configs/env_config.json
-   ```
-
-### Training with Actor-Learner
-
-The LeRobot system uses a distributed actor-learner architecture for training. This architecture decouples robot interactions from the learning process, allowing them to run concurrently without blocking each other. The actor server handles robot observations and actions, sending interaction data to the learner server. The learner server performs gradient descent and periodically updates the actor's policy weights. You will need to start two processes: a learner and an actor.
-
-**Configuration Setup**
-
-Create a training configuration file (example available [here](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/train_config_hilserl_so100.json)). The training config is based on the main `TrainRLServerPipelineConfig` class in `lerobot/configs/train.py`.
-
-1. Configure the policy settings (`type="sac"`, `device`, etc.)
-2. Set `dataset` to your cropped dataset
-3. Configure environment settings with crop parameters
-4. Check the other parameters related to SAC in [configuration_sac.py](https://github.com/huggingface/lerobot/blob/main/src/lerobot/policies/sac/configuration_sac.py#L79).
-5. Verify that the `policy` config is correct with the right `input_features` and `output_features` for your task.
-
-**Starting the Learner**
-
-First, start the learner server process:
-
-```bash
-python -m lerobot.scripts.rl.learner --config_path src/lerobot/configs/train_config_hilserl_so100.json
-```
-
-The learner:
-
-- Initializes the policy network
-- Prepares replay buffers
-- Opens a `gRPC` server to communicate with actors
-- Processes transitions and updates the policy
-
-**Starting the Actor**
-
-In a separate terminal, start the actor process with the same configuration:
-
-```bash
-python -m lerobot.scripts.rl.actor --config_path src/lerobot/configs/train_config_hilserl_so100.json
-```
-
-The actor:
-
-- Connects to the learner via `gRPC`
-- Initializes the environment
-- Execute rollouts of the policy to collect experience
-- Sends transitions to the learner
-- Receives updated policy parameters
-
-**Training Flow**
-
-The training proceeds automatically:
-
-1. The actor executes the policy in the environment
-2. Transitions are collected and sent to the learner
-3. The learner updates the policy based on these transitions
-4. Updated policy parameters are sent back to the actor
-5. The process continues until the specified step limit is reached
-
-**Human in the Loop**
-
-- The key to learning efficiently is to have human interventions to provide corrective feedback and completing the task to aide the policy learning and exploration.
-- To perform human interventions, you can press the upper right trigger button on the gamepad (or the `space` key on the keyboard). This will pause the policy actions and allow you to take over.
-- A successful experiment is one where the human has to intervene at the start but then reduces the amount of interventions as the policy improves. You can monitor the intervention rate in the `wandb` dashboard.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/hil_effect.png?raw=true"
-    alt="Figure shows the control mappings on a Logitech gamepad."
-    title="Gamepad Control Mapping"
-    width="100%"
-  ></img>
-</p>
-
-<p align="center">
-  <i>
-    Example showing how human interventions help guide policy learning over time
-  </i>
-</p>
-
-- The figure shows the plot of the episodic reward over interaction step. The figure shows the effect of human interventions on the policy learning.
-- The orange curve is an experiment without any human interventions. While the pink and blue curves are experiments with human interventions.
-- We can observe that the number of steps where the policy starts achieving the maximum reward is cut by a quarter when human interventions are present.
-
-**Monitoring and Debugging**
-
-If you have `wandb.enable` set to `true` in your configuration, you can monitor training progress in real-time through the [Weights & Biases](https://wandb.ai/site/) dashboard.
-
-### Guide to Human Interventions
-
-The learning process is very sensitive to the intervention strategy. It will takes a few runs to understand how to intervene effectively. Some tips and hints:
-
-- Allow the policy to explore for a few episodes at the start of training.
-- Avoid intervening for long periods of time. Try to intervene in situation to correct the robot's behaviour when it goes off track.
-- Once the policy starts achieving the task, even if its not perfect, you can limit your interventions to simple quick actions like a simple grasping commands.
-
-The ideal behaviour is that your intervention rate should drop gradually during training as shown in the figure below.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/intervention_rate_tutorial_rl.png?raw=true"
-    alt="Intervention rate"
-    title="Intervention rate during training"
-    width="100%"
-  ></img>
-</p>
-
-<p align="center">
-  <i>
-    Plot of the intervention rate during a training run on a pick and lift cube
-    task
-  </i>
-</p>
-
-### Key hyperparameters to tune
-
-Some configuration values have a disproportionate impact on training stability and speed:
-
-- **`temperature_init`** (`policy.temperature_init`) – initial entropy temperature in SAC. Higher values encourage more exploration; lower values make the policy more deterministic early on. A good starting point is `1e-2`. We observed that setting it too high can make human interventions ineffective and slow down learning.
-- **`policy_parameters_push_frequency`** (`policy.actor_learner_config.policy_parameters_push_frequency`) – interval in _seconds_ between two weight pushes from the learner to the actor. The default is `4 s`. Decrease to **1-2 s** to provide fresher weights (at the cost of more network traffic); increase only if your connection is slow, as this will reduce sample efficiency.
-- **`storage_device`** (`policy.storage_device`) – device on which the learner keeps the policy parameters. If you have spare GPU memory, set this to `"cuda"` (instead of the default `"cpu"`). Keeping the weights on-GPU removes CPU→GPU transfer overhead and can significantly increase the number of learner updates per second.
-
-Congrats 🎉, you have finished this tutorial!
-
-> [!TIP]
-> If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb).
-
-Paper citation:
-
-```
-@article{luo2024precise,
-  title={Precise and Dexterous Robotic Manipulation via Human-in-the-Loop Reinforcement Learning},
-  author={Luo, Jianlan and Xu, Charles and Wu, Jeffrey and Levine, Sergey},
-  journal={arXiv preprint arXiv:2410.21845},
-  year={2024}
-}
-```

docs/source/hilserl_sim.mdx

@@ -1,154 +0,0 @@
-# Train RL in Simulation
-
-This guide explains how to use the `gym_hil` simulation environments as an alternative to real robots when working with the LeRobot framework for Human-In-the-Loop (HIL) reinforcement learning.
-
-`gym_hil` is a package that provides Gymnasium-compatible simulation environments specifically designed for Human-In-the-Loop reinforcement learning. These environments allow you to:
-
-- Train policies in simulation to test the RL stack before training on real robots
-
-- Collect demonstrations in sim using external devices like gamepads or keyboards
-- Perform human interventions during policy learning
-
-Currently, the main environment is a Franka Panda robot simulation based on MuJoCo, with tasks like picking up a cube.
-
-## Installation
-
-First, install the `gym_hil` package within the LeRobot environment:
-
-```bash
-pip install -e ".[hilserl]"
-```
-
-## What do I need?
-
-- A gamepad or keyboard to control the robot
-- A Nvidia GPU
-
-## Configuration
-
-To use `gym_hil` with LeRobot, you need to create a configuration file. An example is provided [here](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/gym_hil_env.json). Key configuration sections include:
-
-### Environment Type and Task
-
-```json
-{
-  "env": {
-    "type": "gym_manipulator",
-    "name": "gym_hil",
-    "task": "PandaPickCubeGamepad-v0",
-    "fps": 10
-  },
-  "device": "cuda"
-}
-```
-
-Available tasks:
-
-- `PandaPickCubeBase-v0`: Basic environment
-- `PandaPickCubeGamepad-v0`: With gamepad control
-- `PandaPickCubeKeyboard-v0`: With keyboard control
-
-### Processor Configuration
-
-```json
-{
-  "env": {
-    "processor": {
-      "control_mode": "gamepad",
-      "gripper": {
-        "use_gripper": true,
-        "gripper_penalty": -0.02
-      },
-      "reset": {
-        "control_time_s": 15.0,
-        "fixed_reset_joint_positions": [
-          0.0, 0.195, 0.0, -2.43, 0.0, 2.62, 0.785
-        ]
-      },
-      "inverse_kinematics": {
-        "end_effector_step_sizes": {
-          "x": 0.025,
-          "y": 0.025,
-          "z": 0.025
-        }
-      }
-    }
-  }
-}
-```
-
-Important parameters:
-
-- `gripper.gripper_penalty`: Penalty for excessive gripper movement
-- `gripper.use_gripper`: Whether to enable gripper control
-- `inverse_kinematics.end_effector_step_sizes`: Size of the steps in the x,y,z axes of the end-effector
-- `control_mode`: Set to `"gamepad"` to use a gamepad controller
-
-## Running with HIL RL of LeRobot
-
-### Basic Usage
-
-To run the environment, set mode to null:
-
-```bash
-python -m lerobot.scripts.rl.gym_manipulator --config_path path/to/gym_hil_env.json
-```
-
-### Recording a Dataset
-
-To collect a dataset, set the mode to `record` whilst defining the repo_id and number of episodes to record:
-
-```json
-{
-  "env": {
-    "type": "gym_manipulator",
-    "name": "gym_hil",
-    "task": "PandaPickCubeGamepad-v0"
-  },
-  "dataset": {
-    "repo_id": "username/sim_dataset",
-    "root": null,
-    "task": "pick_cube",
-    "num_episodes_to_record": 10,
-    "replay_episode": null,
-    "push_to_hub": true
-  },
-  "mode": "record"
-}
-```
-
-```bash
-python -m lerobot.scripts.rl.gym_manipulator --config_path path/to/gym_hil_env.json
-```
-
-### Training a Policy
-
-To train a policy, checkout the configuration example available [here](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/train_gym_hil_env.json) and run the actor and learner servers:
-
-```bash
-python -m lerobot.scripts.rl.actor --config_path path/to/train_gym_hil_env.json
-```
-
-In a different terminal, run the learner server:
-
-```bash
-python -m lerobot.scripts.rl.learner --config_path path/to/train_gym_hil_env.json
-```
-
-The simulation environment provides a safe and repeatable way to develop and test your Human-In-the-Loop reinforcement learning components before deploying to real robots.
-
-Congrats 🎉, you have finished this tutorial!
-
-> [!TIP]
-> If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb).
-
-Paper citation:
-
-```
-@article{luo2024precise,
-  title={Precise and Dexterous Robotic Manipulation via Human-in-the-Loop Reinforcement Learning},
-  author={Luo, Jianlan and Xu, Charles and Wu, Jeffrey and Levine, Sergey},
-  journal={arXiv preprint arXiv:2410.21845},
-  year={2024}
-}
-```

docs/source/hope_jr.mdx

@@ -1,277 +0,0 @@
-# HopeJR
-
-## Prerequisites
-
-- [Hardware Setup](https://github.com/TheRobotStudio/HOPEJr)
-
-## Install LeRobot
-
-Follow the [installation instructions](https://github.com/huggingface/lerobot#installation) to install LeRobot.
-
-Install LeRobot with HopeJR dependencies:
-
-```bash
-pip install -e ".[hopejr]"
-```
-
-## Device Configuration
-
-Before starting calibration and operation, you need to identify the USB ports for each HopeJR component. Run this script to find the USB ports for the arm, hand, glove, and exoskeleton:
-
-```bash
-lerobot-find-port
-```
-
-This will display the available USB ports and their associated devices. Make note of the port paths (e.g., `/dev/tty.usbmodem58760433331`, `/dev/tty.usbmodem11301`) as you'll need to specify them in the `--robot.port` and `--teleop.port` parameters when recording data, replaying episodes, or running teleoperation scripts.
-
-## Step 1: Calibration
-
-Before performing teleoperation, HopeJR's limbs need to be calibrated. Calibration files will be saved in `~/.cache/huggingface/lerobot/calibration`
-
-### 1.1 Calibrate Robot Hand
-
-```bash
-lerobot-calibrate \
-    --robot.type=hope_jr_hand \
-    --robot.port=/dev/tty.usbmodem58760432281 \
-    --robot.id=blue \
-    --robot.side=right
-```
-
-When running the calibration script, a calibration GUI will pop up. Finger joints are named as follows:
-
-**Thumb**:
-
-- **CMC**: base joint connecting thumb to hand
-- **MCP**: knuckle joint
-- **PIP**: first finger joint
-- **DIP** : fingertip joint
-
-**Index, Middle, Ring, and Pinky fingers**:
-
-- **Radial flexor**: Moves base of finger towards the thumb
-- **Ulnar flexor**: Moves base of finger towards the pinky
-- **PIP/DIP**: Flexes the distal and proximal phalanx of the finger
-
-Each one of these will need to be calibrated individually via the GUI.
-Note that ulnar and radial flexors should have ranges of the same size (but with different offsets) in order to get symmetric movement.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/calibration_gui_1.png"
-    alt="Setting boundaries in the hand calibration GUI"
-    title="Setting boundaries in the hand calibration GUI"
-    width="100%"
-  ></img>
-</p>
-
-Use the calibration interface to set the range boundaries for each joint as shown above.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/calibration_gui_2.png"
-    alt="Saving calibration values"
-    title="Saving calibration values"
-    width="100%"
-  ></img>
-</p>
-
-Once you have set the appropriate boundaries for all joints, click "Save" to save the calibration values to the motors.
-
-### 1.2 Calibrate Teleoperator Glove
-
-```bash
-lerobot-calibrate \
-    --teleop.type=homunculus_glove \
-    --teleop.port=/dev/tty.usbmodem11201 \
-    --teleop.id=red \
-    --teleop.side=right
-```
-
-Move each finger through its full range of motion, starting from the thumb.
-
-```
-Move thumb through its entire range of motion.
-Recording positions. Press ENTER to stop...
-
--------------------------------------------
-NAME      |    MIN |    POS |    MAX
-thumb_cmc |   1790 |   1831 |   1853
-thumb_mcp |   1497 |   1514 |   1528
-thumb_pip |   1466 |   1496 |   1515
-thumb_dip |   1463 |   1484 |   1514
-```
-
-Continue with each finger:
-
-```
-Move middle through its entire range of motion.
-Recording positions. Press ENTER to stop...
-
--------------------------------------------
-NAME                 |    MIN |    POS |    MAX
-middle_mcp_abduction |   1598 |   1718 |   1820
-middle_mcp_flexion   |   1512 |   1658 |   2136
-middle_dip           |   1484 |   1500 |   1547
-```
-
-Once calibration is complete, the system will save the calibration to `/Users/your_username/.cache/huggingface/lerobot/calibration/teleoperators/homunculus_glove/red.json`
-
-### 1.3 Calibrate Robot Arm
-
-```bash
-lerobot-calibrate \
-    --robot.type=hope_jr_arm \
-    --robot.port=/dev/tty.usbserial-1110 \
-    --robot.id=white
-```
-
-This will open a calibration GUI where you can set the range limits for each motor. The arm motions are organized as follows:
-
-- **Shoulder**: pitch, yaw, and roll
-- **Elbow**: flex
-- **Wrist**: pitch, yaw, and roll
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/calibration_gui_2.png"
-    alt="Setting boundaries in the arm calibration GUI"
-    title="Setting boundaries in the arm calibration GUI"
-    width="100%"
-  ></img>
-</p>
-
-Use the calibration interface to set the range boundaries for each joint. Move each joint through its full range of motion and adjust the minimum and maximum values accordingly. Once you have set the appropriate boundaries for all joints, save the calibration.
-
-### 1.4 Calibrate Teleoperator Exoskeleton
-
-```bash
-lerobot-calibrate \
-    --teleop.type=homunculus_arm \
-    --teleop.port=/dev/tty.usbmodem11201 \
-    --teleop.id=black
-```
-
-The exoskeleton allows one to control the robot arm. During calibration, you'll be prompted to move all joints through their full range of motion:
-
-```
-Move all joints through their entire range of motion.
-Recording positions. Press ENTER to stop...
-
--------------------------------------------
--------------------------------------------
-NAME            |    MIN |    POS |    MAX
-shoulder_pitch  |    586 |    736 |    895
-shoulder_yaw    |   1257 |   1374 |   1390
-shoulder_roll   |    449 |   1034 |   2564
-elbow_flex      |   3023 |   3117 |   3134
-wrist_roll      |   3073 |   3096 |   3147
-wrist_yaw       |   2143 |   2171 |   2185
-wrist_pitch     |   1975 |   1993 |   2074
-Calibration saved to /Users/your_username/.cache/huggingface/lerobot/calibration/teleoperators/homunculus_arm/black.json
-```
-
-## Step 2: Teleoperation
-
-Due to global variable conflicts in the Feetech middleware, teleoperation for arm and hand must run in separate shell sessions:
-
-### Hand
-
-```bash
-lerobot-teleoperate \
-    --robot.type=hope_jr_hand \
-    --robot.port=/dev/tty.usbmodem58760432281 \
-    --robot.id=blue \
-    --robot.side=right \
-    --teleop.type=homunculus_glove \
-    --teleop.port=/dev/tty.usbmodem11201 \
-    --teleop.id=red \
-    --teleop.side=right \
-    --display_data=true \
-    --fps=30
-```
-
-### Arm
-
-```bash
-lerobot-teleoperate \
-    --robot.type=hope_jr_arm \
-    --robot.port=/dev/tty.usbserial-1110 \
-    --robot.id=white \
-    --teleop.type=homunculus_arm \
-    --teleop.port=/dev/tty.usbmodem11201 \
-    --teleop.id=black \
-    --display_data=true \
-    --fps=30
-```
-
-## Step 3: Record, Replay, Train
-
-Record, Replay and Train with Hope-JR is still experimental.
-
-### Record
-
-This step records the dataset, which can be seen as an example [here](https://huggingface.co/datasets/nepyope/hand_record_test_with_video_data/settings).
-
-```bash
-lerobot-record \
-    --robot.type=hope_jr_hand \
-    --robot.port=/dev/tty.usbmodem58760432281 \
-    --robot.id=right \
-    --robot.side=right \
-    --robot.cameras='{"main": {"type": "opencv", "index_or_path": 0, "width": 640, "height": 480, "fps": 30}}' \
-    --teleop.type=homunculus_glove \
-    --teleop.port=/dev/tty.usbmodem1201 \
-    --teleop.id=right \
-    --teleop.side=right \
-    --dataset.repo_id=nepyope/hand_record_test_with_video_data \
-    --dataset.single_task="Hand recording test with video data" \
-    --dataset.num_episodes=1 \
-    --dataset.episode_time_s=5 \
-    --dataset.push_to_hub=true \
-    --dataset.private=true \
-    --display_data=true
-```
-
-### Replay
-
-```bash
-lerobot-replay \
-    --robot.type=hope_jr_hand \
-    --robot.port=/dev/tty.usbmodem58760432281 \
-    --robot.id=right \
-    --robot.side=right \
-    --dataset.repo_id=nepyope/hand_record_test_with_camera \
-    --dataset.episode=0
-```
-
-### Train
-
-```bash
-lerobot-train \
-  --dataset.repo_id=nepyope/hand_record_test_with_video_data \
-  --policy.type=act \
-  --output_dir=outputs/train/hopejr_hand \
-  --job_name=hopejr \
-  --policy.device=mps \
-  --wandb.enable=true \
-  --policy.repo_id=nepyope/hand_test_policy
-```
-
-### Evaluate
-
-This training run can be viewed as an example [here](https://wandb.ai/tino/lerobot/runs/rp0k8zvw?nw=nwusertino).
-
-```bash
-lerobot-record \
-  --robot.type=hope_jr_hand \
-  --robot.port=/dev/tty.usbmodem58760432281 \
-  --robot.id=right \
-  --robot.side=right \
-  --robot.cameras='{"main": {"type": "opencv", "index_or_path": 0, "width": 640, "height": 480, "fps": 30}}' \
-  --display_data=false \
-  --dataset.repo_id=nepyope/eval_hopejr \
-  --dataset.single_task="Evaluate hopejr hand policy" \
-  --dataset.num_episodes=10 \
-  --policy.path=outputs/train/hopejr_hand/checkpoints/last/pretrained_model
-```

docs/source/il_robots.mdx

@@ -1,602 +0,0 @@
-# Imitation Learning on Real-World Robots
-
-This tutorial will explain how to train a neural network to control a real robot autonomously.
-
-**You'll learn:**
-
-1. How to record and visualize your dataset.
-2. How to train a policy using your data and prepare it for evaluation.
-3. How to evaluate your policy and visualize the results.
-
-By following these steps, you'll be able to replicate tasks, such as picking up a Lego block and placing it in a bin with a high success rate, as shown in the video below.
-
-<details>
-<summary><strong>Video: pickup lego block task</strong></summary>
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/lerobot_task.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-</details>
-
-This tutorial isn’t tied to a specific robot: we walk you through the commands and API snippets you can adapt for any supported platform.
-
-During data collection, you’ll use a “teloperation” device, such as a leader arm or keyboard to teleoperate the robot and record its motion trajectories.
-
-Once you’ve gathered enough trajectories, you’ll train a neural network to imitate these trajectories and deploy the trained model so your robot can perform the task autonomously.
-
-If you run into any issues at any point, jump into our [Discord community](https://discord.com/invite/s3KuuzsPFb) for support.
-
-## Set up and Calibrate
-
-If you haven't yet set up and calibrated your robot and teleop device, please do so by following the robot-specific tutorial.
-
-## Teleoperate
-
-In this example, we’ll demonstrate how to teleoperate the SO101 robot. For each command, we also provide a corresponding API example.
-
-Note that the `id` associated with a robot is used to store the calibration file. It's important to use the same `id` when teleoperating, recording, and evaluating when using the same setup.
-
-<hfoptions id="teleoperate_so101">
-<hfoption id="Command">
-```bash
-lerobot-teleoperate \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=my_awesome_follower_arm \
-    --teleop.type=so101_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=my_awesome_leader_arm
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.so101_leader import SO101LeaderConfig, SO101Leader
-from lerobot.robots.so101_follower import SO101FollowerConfig, SO101Follower
-
-robot_config = SO101FollowerConfig(
-    port="/dev/tty.usbmodem58760431541",
-    id="my_red_robot_arm",
-)
-
-teleop_config = SO101LeaderConfig(
-    port="/dev/tty.usbmodem58760431551",
-    id="my_blue_leader_arm",
-)
-
-robot = SO101Follower(robot_config)
-teleop_device = SO101Leader(teleop_config)
-robot.connect()
-teleop_device.connect()
-
-while True:
-    action = teleop_device.get_action()
-    robot.send_action(action)
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-The teleoperate command will automatically:
-
-1. Identify any missing calibrations and initiate the calibration procedure.
-2. Connect the robot and teleop device and start teleoperation.
-
-## Cameras
-
-To add cameras to your setup, follow this [Guide](./cameras#setup-cameras).
-
-## Teleoperate with cameras
-
-With `rerun`, you can teleoperate again while simultaneously visualizing the camera feeds and joint positions. In this example, we’re using the Koch arm.
-
-<hfoptions id="teleoperate_koch_camera">
-<hfoption id="Command">
-```bash
-lerobot-teleoperate \
-    --robot.type=koch_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=my_awesome_follower_arm \
-    --robot.cameras="{ front: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}}" \
-    --teleop.type=koch_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=my_awesome_leader_arm \
-    --display_data=true
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.teleoperators.koch_leader import KochLeaderConfig, KochLeader
-from lerobot.robots.koch_follower import KochFollowerConfig, KochFollower
-
-camera_config = {
-    "front": OpenCVCameraConfig(index_or_path=0, width=1920, height=1080, fps=30)
-}
-
-robot_config = KochFollowerConfig(
-    port="/dev/tty.usbmodem585A0076841",
-    id="my_red_robot_arm",
-    cameras=camera_config
-)
-
-teleop_config = KochLeaderConfig(
-    port="/dev/tty.usbmodem58760431551",
-    id="my_blue_leader_arm",
-)
-
-robot = KochFollower(robot_config)
-teleop_device = KochLeader(teleop_config)
-robot.connect()
-teleop_device.connect()
-
-while True:
-    observation = robot.get_observation()
-    action = teleop_device.get_action()
-    robot.send_action(action)
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-## Record a dataset
-
-Once you're familiar with teleoperation, you can record your first dataset.
-
-We use the Hugging Face hub features for uploading your dataset. If you haven't previously used the Hub, make sure you can login via the cli using a write-access token, this token can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens).
-
-Add your token to the CLI by running this command:
-
-```bash
-huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
-```
-
-Then store your Hugging Face repository name in a variable:
-
-```bash
-HF_USER=$(huggingface-cli whoami | head -n 1)
-echo $HF_USER
-```
-
-Now you can record a dataset. To record 5 episodes and upload your dataset to the hub, adapt the code below for your robot and execute the command or API example.
-
-<hfoptions id="record">
-<hfoption id="Command">
-```bash
-lerobot-record \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem585A0076841 \
-    --robot.id=my_awesome_follower_arm \
-    --robot.cameras="{ front: {type: opencv, index_or_path: 0, width: 1920, height: 1080, fps: 30}}" \
-    --teleop.type=so101_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \
-    --teleop.id=my_awesome_leader_arm \
-    --display_data=true \
-    --dataset.repo_id=${HF_USER}/record-test \
-    --dataset.num_episodes=5 \
-    --dataset.single_task="Grab the black cube"
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.datasets.utils import hw_to_dataset_features
-from lerobot.robots.so100_follower import SO100Follower, SO100FollowerConfig
-from lerobot.teleoperators.so100_leader.config_so100_leader import SO100LeaderConfig
-from lerobot.teleoperators.so100_leader.so100_leader import SO100Leader
-from lerobot.utils.control_utils import init_keyboard_listener
-from lerobot.utils.utils import log_say
-from lerobot.utils.visualization_utils import _init_rerun
-from lerobot.record import record_loop
-
-NUM_EPISODES = 5
-FPS = 30
-EPISODE_TIME_SEC = 60
-RESET_TIME_SEC = 10
-TASK_DESCRIPTION = "My task description"
-
-# Create the robot and teleoperator configurations
-camera_config = {"front": OpenCVCameraConfig(index_or_path=0, width=640, height=480, fps=FPS)}
-robot_config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem58760434471", id="my_awesome_follower_arm", cameras=camera_config
-)
-teleop_config = SO100LeaderConfig(port="/dev/tty.usbmodem585A0077581", id="my_awesome_leader_arm")
-
-# Initialize the robot and teleoperator
-robot = SO100Follower(robot_config)
-teleop = SO100Leader(teleop_config)
-
-# Configure the dataset features
-action_features = hw_to_dataset_features(robot.action_features, "action")
-obs_features = hw_to_dataset_features(robot.observation_features, "observation")
-dataset_features = {**action_features, **obs_features}
-
-# Create the dataset
-dataset = LeRobotDataset.create(
-    repo_id="<hf_username>/<dataset_repo_id>",
-    fps=FPS,
-    features=dataset_features,
-    robot_type=robot.name,
-    use_videos=True,
-    image_writer_threads=4,
-)
-
-# Initialize the keyboard listener and rerun visualization
-_, events = init_keyboard_listener()
-_init_rerun(session_name="recording")
-
-# Connect the robot and teleoperator
-robot.connect()
-teleop.connect()
-
-episode_idx = 0
-while episode_idx < NUM_EPISODES and not events["stop_recording"]:
-    log_say(f"Recording episode {episode_idx + 1} of {NUM_EPISODES}")
-
-    record_loop(
-        robot=robot,
-        events=events,
-        fps=FPS,
-        teleop=teleop,
-        dataset=dataset,
-        control_time_s=EPISODE_TIME_SEC,
-        single_task=TASK_DESCRIPTION,
-        display_data=True,
-    )
-
-    # Reset the environment if not stopping or re-recording
-    if not events["stop_recording"] and (episode_idx < NUM_EPISODES - 1 or events["rerecord_episode"]):
-        log_say("Reset the environment")
-        record_loop(
-            robot=robot,
-            events=events,
-            fps=FPS,
-            teleop=teleop,
-            control_time_s=RESET_TIME_SEC,
-            single_task=TASK_DESCRIPTION,
-            display_data=True,
-        )
-
-    if events["rerecord_episode"]:
-        log_say("Re-recording episode")
-        events["rerecord_episode"] = False
-        events["exit_early"] = False
-        dataset.clear_episode_buffer()
-        continue
-
-    dataset.save_episode()
-    episode_idx += 1
-
-# Clean up
-log_say("Stop recording")
-robot.disconnect()
-teleop.disconnect()
-dataset.push_to_hub()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-#### Dataset upload
-
-Locally, your dataset is stored in this folder: `~/.cache/huggingface/lerobot/{repo-id}`. At the end of data recording, your dataset will be uploaded on your Hugging Face page (e.g. `https://huggingface.co/datasets/${HF_USER}/so101_test`) that you can obtain by running:
-
-```bash
-echo https://huggingface.co/datasets/${HF_USER}/so101_test
-```
-
-Your dataset will be automatically tagged with `LeRobot` for the community to find it easily, and you can also add custom tags (in this case `tutorial` for example).
-
-You can look for other LeRobot datasets on the hub by searching for `LeRobot` [tags](https://huggingface.co/datasets?other=LeRobot).
-
-You can also push your local dataset to the Hub manually, running:
-
-```bash
-huggingface-cli upload ${HF_USER}/record-test ~/.cache/huggingface/lerobot/{repo-id} --repo-type dataset
-```
-
-#### Record function
-
-The `record` function provides a suite of tools for capturing and managing data during robot operation:
-
-##### 1. Data Storage
-
-- Data is stored using the `LeRobotDataset` format and is stored on disk during recording.
-- By default, the dataset is pushed to your Hugging Face page after recording.
-  - To disable uploading, use `--dataset.push_to_hub=False`.
-
-##### 2. Checkpointing and Resuming
-
-- Checkpoints are automatically created during recording.
-- If an issue occurs, you can resume by re-running the same command with `--resume=true`. When resuming a recording, `--dataset.num_episodes` must be set to the **number of additional episodes to be recorded**, and not to the targeted total number of episodes in the dataset !
-- To start recording from scratch, **manually delete** the dataset directory.
-
-##### 3. Recording Parameters
-
-Set the flow of data recording using command-line arguments:
-
-- `--dataset.episode_time_s=60`
-  Duration of each data recording episode (default: **60 seconds**).
-- `--dataset.reset_time_s=60`
-  Duration for resetting the environment after each episode (default: **60 seconds**).
-- `--dataset.num_episodes=50`
-  Total number of episodes to record (default: **50**).
-
-##### 4. Keyboard Controls During Recording
-
-Control the data recording flow using keyboard shortcuts:
-
-- Press **Right Arrow (`→`)**: Early stop the current episode or reset time and move to the next.
-- Press **Left Arrow (`←`)**: Cancel the current episode and re-record it.
-- Press **Escape (`ESC`)**: Immediately stop the session, encode videos, and upload the dataset.
-
-#### Tips for gathering data
-
-Once you're comfortable with data recording, you can create a larger dataset for training. A good starting task is grasping an object at different locations and placing it in a bin. We suggest recording at least 50 episodes, with 10 episodes per location. Keep the cameras fixed and maintain consistent grasping behavior throughout the recordings. Also make sure the object you are manipulating is visible on the camera's. A good rule of thumb is you should be able to do the task yourself by only looking at the camera images.
-
-In the following sections, you’ll train your neural network. After achieving reliable grasping performance, you can start introducing more variations during data collection, such as additional grasp locations, different grasping techniques, and altering camera positions.
-
-Avoid adding too much variation too quickly, as it may hinder your results.
-
-If you want to dive deeper into this important topic, you can check out the [blog post](https://huggingface.co/blog/lerobot-datasets#what-makes-a-good-dataset) we wrote on what makes a good dataset.
-
-#### Troubleshooting:
-
-- On Linux, if the left and right arrow keys and escape key don't have any effect during data recording, make sure you've set the `$DISPLAY` environment variable. See [pynput limitations](https://pynput.readthedocs.io/en/latest/limitations.html#linux).
-
-## Visualize a dataset
-
-If you uploaded your dataset to the hub with `--control.push_to_hub=true`, you can [visualize your dataset online](https://huggingface.co/spaces/lerobot/visualize_dataset) by copy pasting your repo id given by:
-
-```bash
-echo ${HF_USER}/so101_test
-```
-
-## Replay an episode
-
-A useful feature is the `replay` function, which allows you to replay any episode that you've recorded or episodes from any dataset out there. This function helps you test the repeatability of your robot's actions and assess transferability across robots of the same model.
-
-You can replay the first episode on your robot with either the command below or with the API example:
-
-<hfoptions id="replay">
-<hfoption id="Command">
-```bash
-lerobot-replay \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem58760431541 \
-    --robot.id=my_awesome_follower_arm \
-    --dataset.repo_id=${HF_USER}/record-test \
-    --dataset.episode=0 # choose the episode you want to replay
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-import time
-
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.robots.so100_follower.config_so100_follower import SO100FollowerConfig
-from lerobot.robots.so100_follower.so100_follower import SO100Follower
-from lerobot.utils.robot_utils import busy_wait
-from lerobot.utils.utils import log_say
-
-episode_idx = 0
-
-robot_config = SO100FollowerConfig(port="/dev/tty.usbmodem58760434471", id="my_awesome_follower_arm")
-
-robot = SO100Follower(robot_config)
-robot.connect()
-
-dataset = LeRobotDataset("<hf_username>/<dataset_repo_id>", episodes=[episode_idx])
-actions = dataset.hf_dataset.select_columns("action")
-
-log_say(f"Replaying episode {episode_idx}")
-for idx in range(dataset.num_frames):
-    t0 = time.perf_counter()
-
-    action = {
-        name: float(actions[idx]["action"][i]) for i, name in enumerate(dataset.features["action"]["names"])
-    }
-    robot.send_action(action)
-
-    busy_wait(1.0 / dataset.fps - (time.perf_counter() - t0))
-
-robot.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-Your robot should replicate movements similar to those you recorded. For example, check out [this video](https://x.com/RemiCadene/status/1793654950905680090) where we use `replay` on a Aloha robot from [Trossen Robotics](https://www.trossenrobotics.com).
-
-## Train a policy
-
-To train a policy to control your robot, use the [`lerobot-train`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
-
-```bash
-lerobot-train \
-  --dataset.repo_id=${HF_USER}/so101_test \
-  --policy.type=act \
-  --output_dir=outputs/train/act_so101_test \
-  --job_name=act_so101_test \
-  --policy.device=cuda \
-  --wandb.enable=true \
-  --policy.repo_id=${HF_USER}/my_policy
-```
-
-Let's explain the command:
-
-1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/so101_test`.
-2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor states, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
-3. We provided `policy.device=cuda` since we are training on a Nvidia GPU, but you could use `policy.device=mps` to train on Apple silicon.
-4. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
-
-Training should take several hours. You will find checkpoints in `outputs/train/act_so101_test/checkpoints`.
-
-To resume training from a checkpoint, below is an example command to resume from `last` checkpoint of the `act_so101_test` policy:
-
-```bash
-lerobot-train \
-  --config_path=outputs/train/act_so101_test/checkpoints/last/pretrained_model/train_config.json \
-  --resume=true
-```
-
-If you do not want to push your model to the hub after training use `--policy.push_to_hub=false`.
-
-Additionally you can provide extra `tags` or specify a `license` for your model or make the model repo `private` by adding this: `--policy.private=true --policy.tags=\[ppo,rl\] --policy.license=mit`
-
-#### Train using Google Colab
-
-If your local computer doesn't have a powerful GPU you could utilize Google Colab to train your model by following the [ACT training notebook](./notebooks#training-act).
-
-#### Upload policy checkpoints
-
-Once training is done, upload the latest checkpoint with:
-
-```bash
-huggingface-cli upload ${HF_USER}/act_so101_test \
-  outputs/train/act_so101_test/checkpoints/last/pretrained_model
-```
-
-You can also upload intermediate checkpoints with:
-
-```bash
-CKPT=010000
-huggingface-cli upload ${HF_USER}/act_so101_test${CKPT} \
-  outputs/train/act_so101_test/checkpoints/${CKPT}/pretrained_model
-```
-
-## Run inference and evaluate your policy
-
-You can use the `record` script from [`lerobot/record.py`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/record.py) with a policy checkpoint as input, to run inference and evaluate your policy. For instance, run this command or API example to run inference and record 10 evaluation episodes:
-
-<hfoptions id="eval">
-<hfoption id="Command">
-```bash
-lerobot-record  \
-  --robot.type=so100_follower \
-  --robot.port=/dev/ttyACM1 \
-  --robot.cameras="{ up: {type: opencv, index_or_path: /dev/video10, width: 640, height: 480, fps: 30}, side: {type: intelrealsense, serial_number_or_name: 233522074606, width: 640, height: 480, fps: 30}}" \
-  --robot.id=my_awesome_follower_arm \
-  --display_data=false \
-  --dataset.repo_id=${HF_USER}/eval_so100 \
-  --dataset.single_task="Put lego brick into the transparent box" \
-  # <- Teleop optional if you want to teleoperate in between episodes \
-  # --teleop.type=so100_leader \
-  # --teleop.port=/dev/ttyACM0 \
-  # --teleop.id=my_awesome_leader_arm \
-  --policy.path=${HF_USER}/my_policy
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.datasets.utils import hw_to_dataset_features
-from lerobot.policies.act.modeling_act import ACTPolicy
-from lerobot.robots.so100_follower.config_so100_follower import SO100FollowerConfig
-from lerobot.robots.so100_follower.so100_follower import SO100Follower
-from lerobot.utils.control_utils import init_keyboard_listener
-from lerobot.utils.utils import log_say
-from lerobot.utils.visualization_utils import _init_rerun
-from lerobot.record import record_loop
-from lerobot.policies.factory import make_processor
-
-NUM_EPISODES = 5
-FPS = 30
-EPISODE_TIME_SEC = 60
-TASK_DESCRIPTION = "My task description"
-HF_MODEL_ID = "<hf_username>/<model_repo_id>"
-HF_DATASET_ID = "<hf_username>/<eval_dataset_repo_id>"
-
-# Create the robot configuration
-camera_config = {"front": OpenCVCameraConfig(index_or_path=0, width=640, height=480, fps=FPS)}
-robot_config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem58760434471", id="my_awesome_follower_arm", cameras=camera_config
-)
-
-# Initialize the robot
-robot = SO100Follower(robot_config)
-
-# Initialize the policy
-policy = ACTPolicy.from_pretrained(HF_MODEL_ID)
-
-# Configure the dataset features
-action_features = hw_to_dataset_features(robot.action_features, "action")
-obs_features = hw_to_dataset_features(robot.observation_features, "observation")
-dataset_features = {**action_features, **obs_features}
-
-# Create the dataset
-dataset = LeRobotDataset.create(
-    repo_id=HF_DATASET_ID,
-    fps=FPS,
-    features=dataset_features,
-    robot_type=robot.name,
-    use_videos=True,
-    image_writer_threads=4,
-)
-
-# Initialize the keyboard listener and rerun visualization
-_, events = init_keyboard_listener()
-_init_rerun(session_name="recording")
-
-# Connect the robot
-robot.connect()
-
-preprocessor, postprocessor = make_processor(
-    policy_cfg=policy,
-    pretrained_path=HF_MODEL_ID,
-    dataset_stats=dataset.meta.stats,
-)
-
-for episode_idx in range(NUM_EPISODES):
-    log_say(f"Running inference, recording eval episode {episode_idx + 1} of {NUM_EPISODES}")
-
-    # Run the policy inference loop
-    record_loop(
-        robot=robot,
-        events=events,
-        fps=FPS,
-        policy=policy,
-        preprocessor=preprocessor,
-        postprocessor=postprocessor,
-        dataset=dataset,
-        control_time_s=EPISODE_TIME_SEC,
-        single_task=TASK_DESCRIPTION,
-        display_data=True,
-    )
-
-    dataset.save_episode()
-
-# Clean up
-robot.disconnect()
-dataset.push_to_hub()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-As you can see, it's almost the same command as previously used to record your training dataset. Two things changed:
-
-1. There is an additional `--control.policy.path` argument which indicates the path to your policy checkpoint with (e.g. `outputs/train/eval_act_so101_test/checkpoints/last/pretrained_model`). You can also use the model repository if you uploaded a model checkpoint to the hub (e.g. `${HF_USER}/act_so101_test`).
-2. The name of dataset begins by `eval` to reflect that you are running inference (e.g. `${HF_USER}/eval_act_so101_test`).

docs/source/il_sim.mdx

@@ -1,220 +0,0 @@
-# Imitation Learning in Sim
-
-This tutorial will explain how to train a neural network to control a robot in simulation with imitation learning.
-
-**You'll learn:**
-
-1. How to record a dataset in simulation with [gym-hil](https://github.com/huggingface/gym-hil) and visualize the dataset.
-2. How to train a policy using your data.
-3. How to evaluate your policy in simulation and visualize the results.
-
-For the simulation environment we use the same [repo](https://github.com/huggingface/gym-hil) that is also being used by the Human-In-the-Loop (HIL) reinforcement learning algorithm.
-This environment is based on [MuJoCo](https://mujoco.org) and allows you to record datasets in LeRobotDataset format.
-Teleoperation is easiest with a controller like the Logitech F710, but you can also use your keyboard if you are up for the challenge.
-
-## Installation
-
-First, install the `gym_hil` package within the LeRobot environment, go to your LeRobot folder and run this command:
-
-```bash
-pip install -e ".[hilserl]"
-```
-
-## Teleoperate and Record a Dataset
-
-To use `gym_hil` with LeRobot, you need to use a configuration file. An example config file can be found [here](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/env_config_gym_hil_il.json).
-
-To teleoperate and collect a dataset, we need to modify this config file. Here's an example configuration for imitation learning data collection:
-
-```json
-{
-  "env": {
-    "type": "gym_manipulator",
-    "name": "gym_hil",
-    "task": "PandaPickCubeGamepad-v0",
-    "fps": 10
-  },
-  "dataset": {
-    "repo_id": "your_username/il_gym",
-    "root": null,
-    "task": "pick_cube",
-    "num_episodes_to_record": 30,
-    "replay_episode": null,
-    "push_to_hub": true
-  },
-  "mode": "record",
-  "device": "cuda"
-}
-```
-
-Key configuration points:
-
-- Set your `repo_id` in the `dataset` section: `"repo_id": "your_username/il_gym"`
-- Set `num_episodes_to_record: 30` to collect 30 demonstration episodes
-- Ensure `mode` is set to `"record"`
-- If you don't have an NVIDIA GPU, change `"device": "cuda"` to `"mps"` for macOS or `"cpu"`
-- To use keyboard instead of gamepad, change `"task"` to `"PandaPickCubeKeyboard-v0"`
-
-Then we can run this command to start:
-
-<hfoptions id="teleop_sim">
-<hfoption id="Linux">
-
-```bash
-python -m lerobot.scripts.rl.gym_manipulator --config_path path/to/env_config_gym_hil_il.json
-```
-
-</hfoption>
-<hfoption id="MacOS">
-
-```bash
-mjpython -m lerobot.scripts.rl.gym_manipulator --config_path path/to/env_config_gym_hil_il.json
-```
-
-</hfoption>
-</hfoptions>
-
-Once rendered you can teleoperate the robot with the gamepad or keyboard, below you can find the gamepad/keyboard controls.
-
-Note that to teleoperate the robot you have to hold the "Human Take Over Pause Policy" Button `RB` to enable control!
-
-**Gamepad Controls**
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/gamepad_guide.jpg?raw=true"
-    alt="Figure shows the control mappings on a Logitech gamepad."
-    title="Gamepad Control Mapping"
-    width="100%"
-  ></img>
-</p>
-<p align="center">
-  <i>Gamepad button mapping for robot control and episode management</i>
-</p>
-
-**Keyboard controls**
-
-For keyboard controls use the `spacebar` to enable control and the following keys to move the robot:
-
-```bash
-  Arrow keys: Move in X-Y plane
-  Shift and Shift_R: Move in Z axis
-  Right Ctrl and Left Ctrl: Open and close gripper
-  ESC: Exit
-```
-
-## Visualize a dataset
-
-If you uploaded your dataset to the hub you can [visualize your dataset online](https://huggingface.co/spaces/lerobot/visualize_dataset) by copy pasting your repo id.
-
-<p align="center">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/dataset_visualizer_sim.png"
-    alt="Figure shows the dataset visualizer"
-    title="Dataset visualization"
-    width="100%"
-  ></img>
-</p>
-<p align="center">
-  <i>Dataset visualizer</i>
-</p>
-
-## Train a policy
-
-To train a policy to control your robot, use the [`lerobot-train`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
-
-```bash
-lerobot-train \
-  --dataset.repo_id=${HF_USER}/il_gym \
-  --policy.type=act \
-  --output_dir=outputs/train/il_sim_test \
-  --job_name=il_sim_test \
-  --policy.device=cuda \
-  --wandb.enable=true
-```
-
-Let's explain the command:
-
-1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/il_gym`.
-2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor states, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
-3. We provided `policy.device=cuda` since we are training on a Nvidia GPU, but you could use `policy.device=mps` to train on Apple silicon.
-4. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
-
-Training should take several hours, 100k steps (which is the default) will take about 1h on Nvidia A100. You will find checkpoints in `outputs/train/il_sim_test/checkpoints`.
-
-#### Train using Collab
-
-If your local computer doesn't have a powerful GPU you could utilize Google Collab to train your model by following the [ACT training notebook](./notebooks#training-act).
-
-#### Upload policy checkpoints
-
-Once training is done, upload the latest checkpoint with:
-
-```bash
-huggingface-cli upload ${HF_USER}/il_sim_test \
-  outputs/train/il_sim_test/checkpoints/last/pretrained_model
-```
-
-You can also upload intermediate checkpoints with:
-
-```bash
-CKPT=010000
-huggingface-cli upload ${HF_USER}/il_sim_test${CKPT} \
-  outputs/train/il_sim_test/checkpoints/${CKPT}/pretrained_model
-```
-
-## Evaluate your policy in Sim
-
-To evaluate your policy we have to use a configuration file. An example can be found [here](https://huggingface.co/datasets/aractingi/lerobot-example-config-files/blob/main/eval_config_gym_hil.json).
-
-Here's an example evaluation configuration:
-
-```json
-{
-  "env": {
-    "type": "gym_manipulator",
-    "name": "gym_hil",
-    "task": "PandaPickCubeGamepad-v0",
-    "fps": 10
-  },
-  "dataset": {
-    "repo_id": "your_username/il_sim_dataset",
-    "dataset_root": null,
-    "task": "pick_cube"
-  },
-  "pretrained_policy_name_or_path": "your_username/il_sim_model",
-  "device": "cuda"
-}
-```
-
-Make sure to replace:
-
-- `repo_id` with the dataset you trained on (e.g., `your_username/il_sim_dataset`)
-- `pretrained_policy_name_or_path` with your model ID (e.g., `your_username/il_sim_model`)
-
-Then you can run this command to visualize your trained policy
-
-<hfoptions id="eval_policy">
-<hfoption id="Linux">
-
-```bash
-python -m lerobot.scripts.rl.eval_policy --config_path=path/to/eval_config_gym_hil.json
-```
-
-</hfoption>
-<hfoption id="MacOS">
-
-```bash
-mjpython -m lerobot.scripts.rl.eval_policy --config_path=path/to/eval_config_gym_hil.json
-```
-
-</hfoption>
-</hfoptions>
-
-> [!WARNING]
-> While the main workflow of training ACT in simulation is straightforward, there is significant room for exploring how to set up the task, define the initial state of the environment, and determine the type of data required during collection to learn the most effective policy. If your trained policy doesn't perform well, investigate the quality of the dataset it was trained on using our visualizers, as well as the action values and various hyperparameters related to ACT and the simulation.
-
-Congrats 🎉, you have finished this tutorial. If you want to continue with using LeRobot in simulation follow this [Tutorial on reinforcement learning in sim with HIL-SERL](https://huggingface.co/docs/lerobot/hilserl_sim)
-
-> [!TIP]
-> If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb).

docs/source/index.mdx

@@ -1,10 +1,6 @@
 <div class="flex justify-center">
   <a target="_blank" href="https://huggingface.co/lerobot">
-    <img
-      alt="HuggingFace Expert Acceleration Program"
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/lerobot-logo-thumbnail.png"
-      style="width: 100%"
-    ></img>
+      <img alt="HuggingFace Expert Acceleration Program" src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/lerobot-logo-thumbnail.png" style="width: 100%"></img>
   </a>
 </div>
 

docs/source/installation.mdx

@@ -1,117 +1,84 @@
 # Installation
 
-## Environment Setup
+## Install LeRobot
+
+Download our source code:
+```bash
+git clone https://github.com/huggingface/lerobot.git
+cd lerobot
+```
 
 Create a virtual environment with Python 3.10, using [`Miniconda`](https://docs.anaconda.com/miniconda/install/#quick-command-line-install)
-
 ```bash
 conda create -y -n lerobot python=3.10
 ```
 
-Then activate your conda environment, you have to do this each time you open a shell to use lerobot:
+Now restart the shell by running:
+<hfoptions id="shell_restart">
+<hfoption id="Windows">
 
+```bash
+source ~/.bashrc
+```
+</hfoption>
+<hfoption id="Mac">
+
+```bash
+source ~/.bash_profile
+```
+</hfoption>
+<hfoption id="zshell">
+
+```bash
+source ~/.zshrc
+```
+</hfoption>
+</hfoptions>
+
+Then activate your conda environment, you have to do this each time you open a shell to use lerobot:
 ```bash
 conda activate lerobot
 ```
 
 When using `miniconda`, install `ffmpeg` in your environment:
-
 ```bash
 conda install ffmpeg -c conda-forge
 ```
 
 > [!TIP]
 > This usually installs `ffmpeg 7.X` for your platform compiled with the `libsvtav1` encoder. If `libsvtav1` is not supported (check supported encoders with `ffmpeg -encoders`), you can:
->
-> - _[On any platform]_ Explicitly install `ffmpeg 7.X` using:
->
-> ```bash
-> conda install ffmpeg=7.1.1 -c conda-forge
-> ```
->
-> - _[On Linux only]_ If you want to bring your own ffmpeg: Install [ffmpeg build dependencies](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#GettheDependencies) and [compile ffmpeg from source with libsvtav1](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#libsvtav1), and make sure you use the corresponding ffmpeg binary to your install with `which ffmpeg`.
-
-## Install LeRobot 🤗
-
-### From Source
-
-First, clone the repository and navigate into the directory:
+>  - _[On any platform]_ Explicitly install `ffmpeg 7.X` using:
+>  ```bash
+>  conda install ffmpeg=7.1.1 -c conda-forge
+>  ```
+>  - _[On Linux only]_ Install [ffmpeg build dependencies](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#GettheDependencies) and [compile ffmpeg from source with libsvtav1](https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#libsvtav1), and make sure you use the corresponding ffmpeg binary to your install with `which ffmpeg`.
 
+Install 🤗 LeRobot:
 ```bash
-git clone https://github.com/huggingface/lerobot.git
-cd lerobot
+cd lerobot && pip install ".[feetech]"
 ```
 
-Then, install the library in editable mode. This is useful if you plan to contribute to the code.
-
-```bash
-pip install -e .
-```
-
-### Installation from PyPI
-
-**Core Library:**
-Install the base package with:
-
-```bash
-pip install lerobot
-```
-
-_This installs only the default dependencies._
-
-**Extra Features:**
-To install additional functionality, use one of the following:
-
-```bash
-pip install 'lerobot[all]'          # All available features
-pip install 'lerobot[aloha,pusht]'  # Specific features (Aloha & Pusht)
-pip install 'lerobot[feetech]'      # Feetech motor support
-```
-
-_Replace `[...]` with your desired features._
-
-**Available Tags:**
-For a full list of optional dependencies, see:
-https://pypi.org/project/lerobot/
-
-### Troubleshooting
-
+## Troubleshooting
 If you encounter build errors, you may need to install additional dependencies: `cmake`, `build-essential`, and `ffmpeg libs`.
 To install these for linux run:
-
 ```bash
 sudo apt-get install cmake build-essential python-dev pkg-config libavformat-dev libavcodec-dev libavdevice-dev libavutil-dev libswscale-dev libswresample-dev libavfilter-dev pkg-config
 ```
-
 For other systems, see: [Compiling PyAV](https://pyav.org/docs/develop/overview/installation.html#bring-your-own-ffmpeg)
 
-## Optional dependencies
-
-LeRobot provides optional extras for specific functionalities. Multiple extras can be combined (e.g., `.[aloha,feetech]`). For all available extras, refer to `pyproject.toml`.
-
-### Simulations
-
-Install environment packages: `aloha` ([gym-aloha](https://github.com/huggingface/gym-aloha)), `xarm` ([gym-xarm](https://github.com/huggingface/gym-xarm)), or `pusht` ([gym-pusht](https://github.com/huggingface/gym-pusht))
-Example:
+## Sim
+For simulations, 🤗 LeRobot comes with gymnasium environments that can be installed as extras:
+- [aloha](https://github.com/huggingface/gym-aloha)
+- [xarm](https://github.com/huggingface/gym-xarm)
+- [pusht](https://github.com/huggingface/gym-pusht)
 
+For instance, to install 🤗 LeRobot with aloha and pusht, use:
 ```bash
-pip install -e ".[aloha]" # or "[pusht]" for example
+pip install -e ".[aloha, pusht]"
 ```
 
-### Motor Control
-
-For Koch v1.1 install the Dynamixel SDK, for SO100/SO101/Moss install the Feetech SDK.
-
-```bash
-pip install -e ".[feetech]" # or "[dynamixel]" for example
-```
-
-### Experiment Tracking
-
+## W&B
 To use [Weights and Biases](https://docs.wandb.ai/quickstart) for experiment tracking, log in with
-
 ```bash
 wandb login
 ```
-
-You can now assemble your robot if it's not ready yet, look for your robot type on the left. Then follow the link below to use Lerobot with your robot.

docs/source/integrate_hardware.mdx

@@ -1,346 +0,0 @@
-# Bring Your Own Hardware
-
-This tutorial will explain how to integrate your own robot design into the LeRobot ecosystem and have it access all of our tools (data collection, control pipelines, policy training and inference).
-
-To that end, we provide the [`Robot`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/robots/robot.py) base class in the LeRobot which specifies a standard interface for physical robot integration. Let's see how to implement it.
-
-## Prerequisites
-
-- Your own robot which exposes a communication interface (e.g. serial, CAN, TCP)
-- A way to read sensor data and send motor commands programmatically, e.g. manufacturer's SDK or API, or your own protocol implementation.
-- LeRobot installed in your environment. Follow our [Installation Guide](./installation.mdx).
-
-## Choose your motors
-
-If you're using Feetech or Dynamixel motors, LeRobot provides built-in bus interfaces:
-
-- [`FeetechMotorsBus`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/motors/feetech/feetech.py) – for controlling Feetech servos
-- [`DynamixelMotorsBus`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/motors/dynamixel/dynamixel.py) – for controlling Dynamixel servos
-
-Please refer to the [`MotorsBus`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/motors/motors_bus.py) abstract class to learn about its API.
-For a good example of how it can be used, you can have a look at our own [SO101 follower implementation](https://github.com/huggingface/lerobot/blob/main/src/lerobot/robots/so101_follower/so101_follower.py)
-
-Use these if compatible. Otherwise, you'll need to find or write a Python interface (not covered in this tutorial):
-
-- Find an existing SDK in Python (or use bindings to C/C++)
-- Or implement a basic communication wrapper (e.g., via pyserial, socket, or CANopen)
-
-You're not alone—many community contributions use custom boards or firmware!
-
-For Feetech and Dynamixel, we currently support these servos: - Feetech: - STS & SMS series (protocol 0): `sts3215`, `sts3250`, `sm8512bl` - SCS series (protocol 1): `scs0009` - Dynamixel (protocol 2.0 only): `xl330-m077`, `xl330-m288`, `xl430-w250`, `xm430-w350`, `xm540-w270`, `xc430-w150`
-
-If you are using Feetech or Dynamixel servos that are not in this list, you can add those in the [Feetech table](https://github.com/huggingface/lerobot/blob/main/src/lerobot/motors/feetech/tables.py) or [Dynamixel table](https://github.com/huggingface/lerobot/blob/main/src/lerobot/motors/dynamixel/tables.py). Depending on the model, this will require you to add model-specific information. In most cases though, there shouldn't be a lot of additions to do.
-
-In the next sections, we'll use a `FeetechMotorsBus` as the motors interface for the examples. Replace it and adapt to your motors if necessary.
-
-## Step 1: Subclass the `Robot` Interface
-
-You’ll first need to specify the config class and a string identifier (`name`) for your robot. If your robot has special needs that you'd like to be able to change easily, it should go here (e.g. port/address, baudrate).
-
-Here, we'll add the port name and one camera by default for our robot:
-
-<!-- prettier-ignore-start -->
-```python
-from dataclasses import dataclass, field
-
-from lerobot.cameras import CameraConfig
-from lerobot.cameras.opencv import OpenCVCameraConfig
-from lerobot.robots import RobotConfig
-
-
-@RobotConfig.register_subclass("my_cool_robot")
-@dataclass
-class MyCoolRobotConfig(RobotConfig):
-    port: str
-    cameras: dict[str, CameraConfig] = field(
-        default_factory={
-            "cam_1": OpenCVCameraConfig(
-                index_or_path=2,
-                fps=30,
-                width=480,
-                height=640,
-            ),
-        }
-    )
-```
-<!-- prettier-ignore-end -->
-
-[Cameras tutorial](./cameras.mdx) to understand how to detect and add your camera.
-
-Next, we'll create our actual robot class which inherits from `Robot`. This abstract class defines a contract you must follow for your robot to be usable with the rest of the LeRobot tools.
-
-Here we'll create a simple 5-DoF robot with one camera. It could be a simple arm but notice that the `Robot` abstract class does not assume anything on your robot's form factor. You can let you imagination run wild when designing new robots!
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.cameras import make_cameras_from_configs
-from lerobot.motors import Motor, MotorNormMode
-from lerobot.motors.feetech import FeetechMotorsBus
-from lerobot.robots import Robot
-
-class MyCoolRobot(Robot):
-    config_class = MyCoolRobotConfig
-    name = "my_cool_robot"
-
-    def __init__(self, config: MyCoolRobotConfig):
-        super().__init__(config)
-        self.bus = FeetechMotorsBus(
-            port=self.config.port,
-            motors={
-                "joint_1": Motor(1, "sts3250", MotorNormMode.RANGE_M100_100),
-                "joint_2": Motor(2, "sts3215", MotorNormMode.RANGE_M100_100),
-                "joint_3": Motor(3, "sts3215", MotorNormMode.RANGE_M100_100),
-                "joint_4": Motor(4, "sts3215", MotorNormMode.RANGE_M100_100),
-                "joint_5": Motor(5, "sts3215", MotorNormMode.RANGE_M100_100),
-            },
-            calibration=self.calibration,
-        )
-        self.cameras = make_cameras_from_configs(config.cameras)
-```
-<!-- prettier-ignore-end -->
-
-## Step 2: Define Observation and Action Features
-
-These two properties define the _interface contract_ between your robot and tools that consume it (such as data collection or learning pipelines).
-
-> [!WARNING]
-> Note that these properties must be callable even if the robot is not yet connected, so avoid relying on runtime hardware state to define them.
-
-### `observation_features`
-
-This property should return a dictionary describing the structure of sensor outputs from your robot. The keys match what `get_observation()` returns, and the values describe either the shape (for arrays/images) or the type (for simple values).
-
-Example for our 5-DoF arm with one camera:
-
-<!-- prettier-ignore-start -->
-```python
-@property
-def _motors_ft(self) -> dict[str, type]:
-    return {
-        "joint_1.pos": float,
-        "joint_2.pos": float,
-        "joint_3.pos": float,
-        "joint_4.pos": float,
-        "joint_5.pos": float,
-    }
-
-@property
-def _cameras_ft(self) -> dict[str, tuple]:
-    return {
-        cam: (self.cameras[cam].height, self.cameras[cam].width, 3) for cam in self.cameras
-    }
-
-@property
-def observation_features(self) -> dict:
-    return {**self._motors_ft, **self._cameras_ft}
-```
-<!-- prettier-ignore-end -->
-
-In this case, observations consist of a simple dict storing each motor's position and a camera image.
-
-### `action_features`
-
-This property describes the commands your robot expects via `send_action()`. Again, keys must match the expected input format, and values define the shape/type of each command.
-
-Here, we simply use the same joints proprioceptive features (`self._motors_ft`) as with `observation_features`: the action sent will simply the goal position for each motor.
-
-<!-- prettier-ignore-start -->
-```python
-def action_features(self) -> dict:
-    return self._motors_ft
-```
-<!-- prettier-ignore-end -->
-
-## Step 3: Handle Connection and Disconnection
-
-These methods should handle opening and closing communication with your hardware (e.g. serial ports, CAN interfaces, USB devices, cameras).
-
-### `is_connected`
-
-This property should simply reflect that communication with the robot's hardware is established. When this property is `True`, it should be possible to read and write to the hardware using `get_observation()` and `send_action()`.
-
-<!-- prettier-ignore-start -->
-```python
-@property
-def is_connected(self) -> bool:
-    return self.bus.is_connected and all(cam.is_connected for cam in self.cameras.values())
-```
-<!-- prettier-ignore-end -->
-
-### `connect()`
-
-This method should establish communication with the hardware. Moreover, if your robot needs calibration and is not calibrated, it should start a calibration procedure by default. If your robot needs some specific configuration, this should also be called here.
-
-<!-- prettier-ignore-start -->
-```python
-def connect(self, calibrate: bool = True) -> None:
-    self.bus.connect()
-    if not self.is_calibrated and calibrate:
-        self.calibrate()
-
-    for cam in self.cameras.values():
-        cam.connect()
-
-    self.configure()
-```
-<!-- prettier-ignore-end -->
-
-### `disconnect()`
-
-This method should gracefully terminate communication with the hardware: free any related resources (threads or processes), close ports, etc.
-
-Here, we already handle this in our `MotorsBus` and `Camera` classes so we just need to call their own `disconnect()` methods:
-
-<!-- prettier-ignore-start -->
-```python
-def disconnect(self) -> None:
-    self.bus.disconnect()
-    for cam in self.cameras.values():
-        cam.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-## Step 4: Support Calibration and Configuration
-
-LeRobot supports saving and loading calibration data automatically. This is useful for joint offsets, zero positions, or sensor alignment.
-
-> Note that depending on your hardware, this may not apply. If that's the case, you can simply leave these methods as no-ops:
-
-<!-- prettier-ignore-start -->
-```python
-> @property
-> def is_calibrated(self) -> bool:
->    return True
->
-> def calibrate(self) -> None:
->    pass
-> ```
-
-### `is_calibrated`
-
-This should reflect whether your robot has the required calibration loaded.
-
-```
-<!-- prettier-ignore-end -->python
-@property
-def is_calibrated(self) -> bool:
-    return self.bus.is_calibrated
-```
-
-### `calibrate()`
-
-The goal of the calibration is twofold:
-    - Know the physical range of motion of each motors in order to only send commands within this range.
-    - Normalize raw motors positions to sensible continuous values (e.g. percentages, degrees) instead of arbitrary discrete value dependant on the specific motor used that will not replicate elsewhere.
-
-It should implement the logic for calibration (if relevant) and update the `self.calibration` dictionary. If you are using Feetech or Dynamixel motors, our bus interfaces already include methods to help with this.
-
-
-<!-- prettier-ignore-start -->
-```python
-def calibrate(self) -> None:
-    self.bus.disable_torque()
-    for motor in self.bus.motors:
-        self.bus.write("Operating_Mode", motor, OperatingMode.POSITION.value)
-
-    input(f"Move {self} to the middle of its range of motion and press ENTER....")
-    homing_offsets = self.bus.set_half_turn_homings()
-
-    print(
-        "Move all joints sequentially through their entire ranges "
-        "of motion.\nRecording positions. Press ENTER to stop..."
-    )
-    range_mins, range_maxes = self.bus.record_ranges_of_motion()
-
-    self.calibration = {}
-    for motor, m in self.bus.motors.items():
-        self.calibration[motor] = MotorCalibration(
-            id=m.id,
-            drive_mode=0,
-            homing_offset=homing_offsets[motor],
-            range_min=range_mins[motor],
-            range_max=range_maxes[motor],
-        )
-
-    self.bus.write_calibration(self.calibration)
-    self._save_calibration()
-    print("Calibration saved to", self.calibration_fpath)
-```
-<!-- prettier-ignore-end -->
-
-### `configure()`
-
-Use this to set up any configuration for your hardware (servos control modes, controller gains, etc.). This should usually be run at connection time and be idempotent.
-
-<!-- prettier-ignore-start -->
-```python
-def configure(self) -> None:
-    with self.bus.torque_disabled():
-        self.bus.configure_motors()
-        for motor in self.bus.motors:
-            self.bus.write("Operating_Mode", motor, OperatingMode.POSITION.value)
-            self.bus.write("P_Coefficient", motor, 16)
-            self.bus.write("I_Coefficient", motor, 0)
-            self.bus.write("D_Coefficient", motor, 32)
-```
-<!-- prettier-ignore-end -->
-
-## Step 5: Implement Sensors Reading and Action Sending
-
-These are the most important runtime functions: the core I/O loop.
-
-### `get_observation()`
-
-Returns a dictionary of sensor values from the robot. These typically include motor states, camera frames, various sensors, etc. In the LeRobot framework, these observations are what will be fed to a policy in order to predict the actions to take. The dictionary keys and structure must match `observation_features`.
-
-<!-- prettier-ignore-start -->
-```python
-def get_observation(self) -> dict[str, Any]:
-    if not self.is_connected:
-        raise ConnectionError(f"{self} is not connected.")
-
-    # Read arm position
-    obs_dict = self.bus.sync_read("Present_Position")
-    obs_dict = {f"{motor}.pos": val for motor, val in obs_dict.items()}
-
-    # Capture images from cameras
-    for cam_key, cam in self.cameras.items():
-        obs_dict[cam_key] = cam.async_read()
-
-    return obs_dict
-```
-<!-- prettier-ignore-end -->
-
-### `send_action()`
-
-Takes a dictionary that matches `action_features`, and sends it to your hardware. You can add safety limits (clipping, smoothing) and return what was actually sent.
-
-For simplicity, we won't be adding any modification of the actions in our example here.
-
-<!-- prettier-ignore-start -->
-```python
-def send_action(self, action: dict[str, Any]) -> dict[str, Any]:
-    goal_pos = {key.removesuffix(".pos"): val for key, val in action.items()}
-
-    # Send goal position to the arm
-    self.bus.sync_write("Goal_Position", goal_pos)
-
-    return action
-```
-<!-- prettier-ignore-end -->
-
-## Adding a Teleoperator
-
-For implementing teleoperation devices, we also provide a [`Teleoperator`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/teleoperators/teleoperator.py) base class. This class is very similar to the `Robot` base class and also doesn't assume anything on form factor.
-
-The main differences are in the I/O functions: a teleoperator allows you to produce action via `get_action` and can receive feedback actions via `send_feedback`. Feedback could be anything controllable on the teleoperation device that could help the person controlling it understand the consequences of the actions sent. Think motion/force feedback on a leader arm, vibrations on a gamepad controller for example. To implement a teleoperator, you can follow this same tutorial and adapt it for these two methods.
-
-## Wrapping Up
-
-Once your robot class is complete, you can leverage the LeRobot ecosystem:
-
-- Control your robot with available teleoperators or integrate directly your teleoperating device
-- Record training data and visualize it
-- Integrate it into RL or imitation learning pipelines
-
-Don't hesitate to reach out to the community for help on our [Discord](https://discord.gg/s3KuuzsPFb) 🤗

docs/source/koch.mdx

@@ -1,283 +0,0 @@
-# Koch v1.1
-
-In the steps below, we explain how to assemble the Koch v1.1 robot.
-
-## Order and assemble the parts
-
-Follow the sourcing and assembling instructions provided in this [README](https://github.com/jess-moss/koch-v1-1). This will guide you through setting up both the follower and leader arms, as shown in the image below.
-
-For a visual walkthrough of the assembly process, you can refer to [this video tutorial](https://youtu.be/8nQIg9BwwTk).
-
-> [!WARNING]
-> Since the production of this video, we simplified the configuration phase. Because of this, two things differ from the instructions in that video:
->
-> - Don't plug in all the motor cables right away and wait to be instructed to do so in [Configure the motors](#configure-the-motors).
-> - Don't screw in the controller board (PCB) to the base right away and wait for being instructed to do so in [Configure the motors](#configure-the-motors).
-
-## Install LeRobot 🤗
-
-To install LeRobot follow, our [Installation Guide](./installation)
-
-In addition to these instructions, you need to install the Dynamixel SDK:
-
-```bash
-pip install -e ".[dynamixel]"
-```
-
-## Configure the motors
-
-### 1. Find the USB ports associated with each arm
-
-To find the port for each bus servo adapter, run this script:
-
-```bash
-lerobot-find-port
-```
-
-<hfoptions id="example">
-<hfoption id="Mac">
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
-Remove the USB cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/tty.usbmodem575E0032081
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/tty.usbmodem575E0032081` corresponding to your leader or follower arm.
-
-</hfoption>
-<hfoption id="Linux">
-
-On Linux, you might need to give access to the USB ports by running:
-
-```bash
-sudo chmod 666 /dev/ttyACM0
-sudo chmod 666 /dev/ttyACM1
-```
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/ttyACM0', '/dev/ttyACM1']
-Remove the usb cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/ttyACM1
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/ttyACM1` corresponding to your leader or follower arm.
-
-</hfoption>
-</hfoptions>
-
-### 2. Set the motors ids and baudrates
-
-Each motor is identified by a unique id on the bus. When brand new, motors usually come with a default id of `1`. For the communication to work properly between the motors and the controller, we first need to set a unique, different id to each motor. Additionally, the speed at which data is transmitted on the bus is determined by the baudrate. In order to talk to each other, the controller and all the motors need to be configured with the same baudrate.
-
-To that end, we first need to connect to each motor individually with the controller in order to set these. Since we will write these parameters in the non-volatile section of the motors' internal memory (EEPROM), we'll only need to do this once.
-
-If you are repurposing motors from another robot, you will probably also need to perform this step, as the ids and baudrate likely won't match.
-
-#### Follower
-
-Connect the usb cable from your computer and the 5V power supply to the follower arm's controller board. Then, run the following command or run the API example with the port you got from the previous step. You'll also need to give your leader arm a name with the `id` parameter.
-
-For a visual reference on how to set the motor ids please refer to [this video](https://huggingface.co/docs/lerobot/en/so101#setup-motors-video) where we follow the process for the SO101 arm.
-
-<hfoptions id="setup_motors">
-<hfoption id="Command">
-
-```bash
-lerobot-setup-motors \
-    --robot.type=koch_follower \
-    --robot.port=/dev/tty.usbmodem575E0031751 # <- paste here the port found at previous step
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.robots.koch_follower import KochFollower, KochFollowerConfig
-
-config = KochFollowerConfig(
-    port="/dev/tty.usbmodem575E0031751",
-    id="my_awesome_follower_arm",
-)
-follower = KochFollower(config)
-follower.setup_motors()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-You should see the following instruction.
-
-```
-Connect the controller board to the 'gripper' motor only and press enter.
-```
-
-As instructed, plug the gripper's motor. Make sure it's the only motor connected to the board, and that the motor itself is not yet daisy-chained to any other motor. As you press `[Enter]`, the script will automatically set the id and baudrate for that motor.
-
-<details>
-<summary>Troubleshooting</summary>
-
-If you get an error at that point, check your cables and make sure they are plugged in properly:
-
-<ul>
-  <li>Power supply</li>
-  <li>USB cable between your computer and the controller board</li>
-  <li>The 3-pin cable from the controller board to the motor</li>
-</ul>
-
-If you are using a Waveshare controller board, make sure that the two jumpers are set on the `B` channel (USB).
-
-</details>
-
-You should then see the following message:
-
-```
-'gripper' motor id set to 6
-```
-
-Followed by the next instruction:
-
-```
-Connect the controller board to the 'wrist_roll' motor only and press enter.
-```
-
-You can disconnect the 3-pin cable from the controller board but you can leave it connected to the gripper motor on the other end as it will already be in the right place. Now, plug in another 3-pin cable to the wrist roll motor and connect it to the controller board. As with the previous motor, make sure it is the only motor connected to the board and that the motor itself isn't connected to any other one.
-
-Repeat the operation for each motor as instructed.
-
-> [!TIP]
-> Check your cabling at each step before pressing Enter. For instance, the power supply cable might disconnect as you manipulate the board.
-
-When you are done, the script will simply finish, at which point the motors are ready to be used. You can now plug the 3-pin cable from each motor to the next one, and the cable from the first motor (the 'shoulder pan' with id=1) to the controller board, which can now be attached to the base of the arm.
-
-#### Leader
-
-Do the same steps for the leader arm but modify the command or script accordingly.
-
-<hfoptions id="setup_motors">
-<hfoption id="Command">
-
-```bash
-lerobot-setup-motors \
-    --teleop.type=koch_leader \
-    --teleop.port=/dev/tty.usbmodem575E0031751 \  # <- paste here the port found at previous step
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.koch_leader import KochLeader, KochLeaderConfig
-
-config = KochLeaderConfig(
-    port="/dev/tty.usbmodem575E0031751",
-    id="my_awesome_leader_arm",
-)
-leader = KochLeader(config)
-leader.setup_motors()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-## Calibrate
-
-Next, you'll need to calibrate your robot to ensure that the leader and follower arms have the same position values when they are in the same physical position.
-The calibration process is very important because it allows a neural network trained on one robot to work on another.
-
-#### Follower
-
-Run the following command or API example to calibrate the follower arm:
-
-<hfoptions id="calibrate_follower">
-<hfoption id="Command">
-
-```bash
-lerobot-calibrate \
-    --robot.type=koch_follower \
-    --robot.port=/dev/tty.usbmodem58760431551 \ # <- The port of your robot
-    --robot.id=my_awesome_follower_arm  # <- Give the robot a unique name
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.robots.koch_follower import KochFollowerConfig, KochFollower
-
-config = KochFollowerConfig(
-    port="/dev/tty.usbmodem585A0076891",
-    id="my_awesome_follower_arm",
-)
-
-follower = KochFollower(config)
-follower.connect(calibrate=False)
-follower.calibrate()
-follower.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-We unified the calibration method for most robots. Thus, the calibration steps for this Koch arm are the same as the steps for the SO100 and SO101. First, we have to move the robot to the position where each joint is in the middle of its range, then we press `Enter`. Secondly, we move all joints through their full range of motion. A video of this same process for the SO101 as reference can be found [here](https://huggingface.co/docs/lerobot/en/so101#calibration-video).
-
-#### Leader
-
-Do the same steps to calibrate the leader arm, run the following command or API example:
-
-<hfoptions id="calibrate_leader">
-<hfoption id="Command">
-
-```bash
-lerobot-calibrate \
-    --teleop.type=koch_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \ # <- The port of your robot
-    --teleop.id=my_awesome_leader_arm  # <- Give the robot a unique name
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.koch_leader import KochLeaderConfig, KochLeader
-
-config = KochLeaderConfig(
-    port="/dev/tty.usbmodem575E0031751",
-    id="my_awesome_leader_arm",
-)
-
-leader = KochLeader(config)
-leader.connect(calibrate=False)
-leader.calibrate()
-leader.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-Congrats 🎉, your robot is all set to learn a task on its own. Start training it by following this tutorial: [Getting started with real-world robots](./getting_started_real_world_robot)
-
-> [!TIP]
-> If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb).

docs/source/lekiwi.mdx

@@ -1,337 +0,0 @@
-# LeKiwi
-
-In the steps below, we explain how to assemble the LeKiwi mobile robot.
-
-## Source the parts
-
-Follow this [README](https://github.com/SIGRobotics-UIUC/LeKiwi). It contains the bill of materials, with a link to source the parts, as well as the instructions to 3D print the parts.
-And advise if it's your first time printing or if you don't own a 3D printer.
-
-### Wired version
-
-If you have the **wired** LeKiwi version, you can skip the installation of the Raspberry Pi and setting up SSH. You can also run all commands directly on your PC for both the LeKiwi scripts and the leader arm scripts for teleoperating.
-
-## Install software on Pi
-
-Now we have to set up the remote PC that will run on the LeKiwi Robot. This is normally a Raspberry Pi, but can be any PC that can run on 5V and has enough usb ports (2 or more) for the cameras and motor control board.
-
-### Install OS
-
-For setting up the Raspberry Pi and its SD-card see: [Setup PI](https://www.raspberrypi.com/documentation/computers/getting-started.html). Here is explained how to download the [Imager](https://www.raspberrypi.com/software/) to install Raspberry Pi OS or Ubuntu.
-
-### Setup SSH
-
-After setting up your Pi, you should enable and set up [SSH](https://www.raspberrypi.com/news/coding-on-raspberry-pi-remotely-with-visual-studio-code/) (Secure Shell Protocol) so you can log in to the Pi from your laptop without requiring a screen, keyboard, and mouse on the Pi. A great tutorial on how to do this can be found [here](https://www.raspberrypi.com/documentation/computers/remote-access.html#ssh). Logging into your Pi can be done in your Command Prompt (cmd) or, if you use VSCode you can use [this](https://marketplace.visualstudio.com/items?itemName=ms-vscode-remote.remote-ssh) extension.
-
-### Install LeRobot on Pi 🤗
-
-On your Raspberry Pi install LeRobot using our [Installation Guide](./installation)
-
-In addition to these instructions, you need to install the Feetech SDK & ZeroMQ on your Pi:
-
-```bash
-pip install -e ".[lekiwi]"
-```
-
-## Install LeRobot locally
-
-If you already have installed LeRobot on your laptop/pc you can skip this step; otherwise, please follow along as we do the same steps we did on the Pi.
-
-Follow our [Installation Guide](./installation)
-
-In addition to these instructions, you need to install the Feetech SDK & ZeroMQ on your laptop/pc:
-
-```bash
-pip install -e ".[lekiwi]"
-```
-
-Great :hugs:! You are now done installing LeRobot, and we can begin assembling the SO100/SO101 arms and the mobile base :robot:.
-Every time you now want to use LeRobot, you can go to the `~/lerobot` folder where we installed LeRobot and run one of the commands.
-
-# Step-by-Step Assembly Instructions
-
-First, we will assemble the two SO100/SO101 arms. One to attach to the mobile base and one for teleoperation. Then we will assemble the mobile base. The instructions for assembling can be found on these two pages:
-
-- [Assemble SO101](./so101#step-by-step-assembly-instructions)
-- [Assemble LeKiwi](https://github.com/SIGRobotics-UIUC/LeKiwi/blob/main/Assembly.md)
-
-### Find the USB ports associated with motor board
-
-To find the port for each bus servo adapter, run this script:
-
-```bash
-lerobot-find-port
-```
-
-<hfoptions id="example">
-<hfoption id="Mac">
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/tty.usbmodem575E0032081']
-Remove the USB cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/tty.usbmodem575E0032081
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/tty.usbmodem575E0032081` corresponding to your board.
-
-</hfoption>
-<hfoption id="Linux">
-
-On Linux, you might need to give access to the USB ports by running:
-
-```bash
-sudo chmod 666 /dev/ttyACM0
-sudo chmod 666 /dev/ttyACM1
-```
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/ttyACM0']
-Remove the usb cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/ttyACM0
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/ttyACM0` corresponding to your board.
-
-</hfoption>
-</hfoptions>
-
-### Configure motors
-
-The instructions for configuring the motors can be found in the SO101 [docs](./so101#configure-the-motors). Besides the ids for the arm motors, we also need to set the motor ids for the mobile base. These need to be in a specific order to work. Below an image of the motor ids and motor mounting positions for the mobile base. Note that we only use one Motor Control board on LeKiwi. This means the motor ids for the wheels are 7, 8 and 9.
-
-You can run this command to setup motors for LeKiwi. It will first setup the motors for arm (id 6..1) and then setup motors for wheels (9,8,7)
-
-```bash
-lerobot-setup-motors \
-    --robot.type=lekiwi \
-    --robot.port=/dev/tty.usbmodem58760431551 # <- paste here the port found at previous step
-```
-
-<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/motor_ids.webp" alt="Motor ID's for mobile robot" title="Motor ID's for mobile robot" width="60%">
-
-### Troubleshoot communication
-
-If you are having trouble connecting to the Mobile SO100, follow these steps to diagnose and resolve the issue.
-
-#### 1. Verify IP Address Configuration
-
-Make sure that the correct IP for the Pi is used in the commands or in your code. To check the Raspberry Pi's IP address, run (on the Pi command line):
-
-```bash
-hostname -I
-```
-
-#### 2. Check if Pi is reachable from laptop/pc
-
-Try pinging the Raspberry Pi from your laptop:
-
-```bach
-ping <your_pi_ip_address>
-```
-
-If the ping fails:
-
-- Ensure the Pi is powered on and connected to the same network.
-- Check if SSH is enabled on the Pi.
-
-#### 3. Try SSH connection
-
-If you can't SSH into the Pi, it might not be properly connected. Use:
-
-```bash
-ssh <your_pi_user_name>@<your_pi_ip_address>
-```
-
-If you get a connection error:
-
-- Ensure SSH is enabled on the Pi by running:
-  ```bash
-  sudo raspi-config
-  ```
-  Then navigate to: **Interfacing Options -> SSH** and enable it.
-
-### Calibration
-
-Now we have to calibrate the leader arm and the follower arm. The wheel motors don't have to be calibrated.
-The calibration process is very important because it allows a neural network trained on one robot to work on another.
-
-### Calibrate follower arm (on mobile base)
-
-Make sure the arm is connected to the Raspberry Pi and run this script or API example (on the Raspberry Pi via SSH) to launch calibration of the follower arm:
-
-```bash
-lerobot-calibrate \
-    --robot.type=lekiwi \
-    --robot.id=my_awesome_kiwi # <- Give the robot a unique name
-```
-
-We unified the calibration method for most robots, thus, the calibration steps for this SO100 arm are the same as the steps for the Koch and SO101. First, we have to move the robot to the position where each joint is in the middle of its range, then we press `Enter`. Secondly, we move all joints through their full range of motion. A video of this same process for the SO101 as reference can be found [here](https://huggingface.co/docs/lerobot/en/so101#calibration-video).
-
-### Wired version
-
-If you have the **wired** LeKiwi version, please run all commands on your laptop.
-
-### Calibrate leader arm
-
-Then, to calibrate the leader arm (which is attached to the laptop/pc). Run the following command of API example on your laptop:
-
-<hfoptions id="calibrate_leader">
-<hfoption id="Command">
-
-```bash
-lerobot-calibrate \
-    --teleop.type=so100_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \ # <- The port of your robot
-    --teleop.id=my_awesome_leader_arm # <- Give the robot a unique name
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.so100_leader import SO100LeaderConfig, SO100Leader
-
-config = SO100LeaderConfig(
-    port="/dev/tty.usbmodem58760431551",
-    id="my_awesome_leader_arm",
-)
-
-leader = SO100Leader(config)
-leader.connect(calibrate=False)
-leader.calibrate()
-leader.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-## Teleoperate LeKiwi
-
-> [!TIP]
-> If you're using a Mac, you might need to give Terminal permission to access your keyboard for teleoperation. Go to System Preferences > Security & Privacy > Input Monitoring and check the box for Terminal.
-
-To teleoperate, SSH into your Raspberry Pi, and run `conda activate lerobot` and this command:
-
-```bash
-python -m lerobot.robots.lekiwi.lekiwi_host --robot.id=my_awesome_kiwi
-```
-
-Then on your laptop, also run `conda activate lerobot` and run the API example, make sure you set the correct `remote_ip` and `port` in `examples/lekiwi/teleoperate.py`.
-
-```bash
-python examples/lekiwi/teleoperate.py
-```
-
-You should see on your laptop something like this: `[INFO] Connected to remote robot at tcp://172.17.133.91:5555 and video stream at tcp://172.17.133.91:5556.` Now you can move the leader arm and use the keyboard (w,a,s,d) to drive forward, left, backwards, right. And use (z,x) to turn left or turn right. You can use (r,f) to increase and decrease the speed of the mobile robot. There are three speed modes, see the table below:
-
-| Speed Mode | Linear Speed (m/s) | Rotation Speed (deg/s) |
-| ---------- | ------------------ | ---------------------- |
-| Fast       | 0.4                | 90                     |
-| Medium     | 0.25               | 60                     |
-| Slow       | 0.1                | 30                     |
-
-| Key | Action         |
-| --- | -------------- |
-| W   | Move forward   |
-| A   | Move left      |
-| S   | Move backward  |
-| D   | Move right     |
-| Z   | Turn left      |
-| X   | Turn right     |
-| R   | Increase speed |
-| F   | Decrease speed |
-
-> [!TIP]
-> If you use a different keyboard, you can change the keys for each command in the [`LeKiwiClientConfig`](https://github.com/huggingface/lerobot/blob/main/src/lerobot/robots/lekiwi/config_lekiwi.py).
-
-### Wired version
-
-If you have the **wired** LeKiwi version, please run all commands on your laptop.
-
-## Record a dataset
-
-Once you're familiar with teleoperation, you can record your first dataset.
-
-We use the Hugging Face hub features for uploading your dataset. If you haven't previously used the Hub, make sure you can login via the cli using a write-access token, this token can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens).
-
-Add your token to the CLI by running this command:
-
-```bash
-huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
-```
-
-Then store your Hugging Face repository name in a variable:
-
-```bash
-HF_USER=$(huggingface-cli whoami | head -n 1)
-echo $HF_USER
-```
-
-Now you can record a dataset. To record episodes and upload your dataset to the hub, execute this API example tailored for LeKiwi. Make sure to first adapt the `remote_ip`, `repo_id`, `port` and `task` in the script. If you would like to run the script for longer you can increase `NB_CYCLES_CLIENT_CONNECTION`.
-
-```bash
-python examples/lekiwi/record.py
-```
-
-#### Dataset upload
-
-Locally, your dataset is stored in this folder: `~/.cache/huggingface/lerobot/{repo-id}`. At the end of data recording, your dataset will be uploaded on your Hugging Face page (e.g. https://huggingface.co/datasets/cadene/so101_test) that you can obtain by running:
-
-```bash
-echo https://huggingface.co/datasets/${HF_USER}/so101_test
-```
-
-Your dataset will be automatically tagged with `LeRobot` for the community to find it easily, and you can also add custom tags (in this case `tutorial` for example).
-
-You can look for other LeRobot datasets on the hub by searching for `LeRobot` [tags](https://huggingface.co/datasets?other=LeRobot).
-
-#### Tips for gathering data
-
-Once you're comfortable with data recording, you can create a larger dataset for training. A good starting task is grasping an object at different locations and placing it in a bin. We suggest recording at least 50 episodes, with 10 episodes per location. Keep the cameras fixed and maintain consistent grasping behavior throughout the recordings. Also make sure the object you are manipulating is visible on the camera's. A good rule of thumb is you should be able to do the task yourself by only looking at the camera images.
-
-In the following sections, you’ll train your neural network. After achieving reliable grasping performance, you can start introducing more variations during data collection, such as additional grasp locations, different grasping techniques, and altering camera positions.
-
-Avoid adding too much variation too quickly, as it may hinder your results.
-
-If you want to dive deeper into this important topic, you can check out the [blog post](https://huggingface.co/blog/lerobot-datasets#what-makes-a-good-dataset) we wrote on what makes a good dataset.
-
-#### Troubleshooting:
-
-- On Linux, if the left and right arrow keys and escape key don't have any effect during data recording, make sure you've set the `$DISPLAY` environment variable. See [pynput limitations](https://pynput.readthedocs.io/en/latest/limitations.html#linux).
-
-## Replay an episode
-
-To replay an episode run the API example below, make sure to change `remote_ip`, `port`, LeRobotDatasetId and episode index.
-
-```bash
-python examples/lekiwi/replay.py
-```
-
-Congrats 🎉, your robot is all set to learn a task on its own. Start training it by the training part of this tutorial: [Getting started with real-world robots](./getting_started_real_world_robot)
-
-## Evaluate your policy
-
-To evaluate your policy run the `evaluate.py` API example, make sure to change `remote_ip`, `port`, model..
-
-```bash
-python examples/lekiwi/evaluate.py
-```
-
-> [!TIP]
-> If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb).

docs/source/notebooks.mdx

@@ -1,29 +0,0 @@
-# 🤗 LeRobot Notebooks
-
-This repository contains example notebooks for using LeRobot. These notebooks demonstrate how to train policies on real or simulation datasets using standardized policies.
-
----
-
-### Training ACT
-
-[ACT](https://huggingface.co/papers/2304.13705) (Action Chunking Transformer) is a transformer-based policy architecture for imitation learning that processes robot states and camera inputs to generate smooth, chunked action sequences.
-
-We provide a ready-to-run Google Colab notebook to help you train ACT policies using datasets from the Hugging Face Hub, with optional logging to Weights & Biases.
-
-| Notebook                                                                                                | Colab                                                                                                                                                                             |
-| :------------------------------------------------------------------------------------------------------ | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| [Train ACT with LeRobot](https://github.com/huggingface/notebooks/blob/main/lerobot/training-act.ipynb) | [![Open in Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/huggingface/notebooks/blob/main/lerobot/training-act.ipynb) |
-
-Expected training time for 100k steps: ~1.5 hours on an NVIDIA A100 GPU with batch size of `64`.
-
-### Training SmolVLA
-
-[SmolVLA](https://huggingface.co/papers/2506.01844) is a small but efficient Vision-Language-Action model. It is compact in size with 450 M-parameter and is developed by Hugging Face.
-
-We provide a ready-to-run Google Colab notebook to help you train SmolVLA policies using datasets from the Hugging Face Hub, with optional logging to Weights & Biases.
-
-| Notebook                                                                                                        | Colab                                                                                                                                                                                 |
-| :-------------------------------------------------------------------------------------------------------------- | :------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [Train SmolVLA with LeRobot](https://github.com/huggingface/notebooks/blob/main/lerobot/training-smolvla.ipynb) | [![Open in Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/huggingface/notebooks/blob/main/lerobot/training-smolvla.ipynb) |
-
-Expected training time for 20k steps: ~5 hours on an NVIDIA A100 GPU with batch size of `64`.

docs/source/policy_act_README.md

@@ -1,14 +0,0 @@
-## Paper
-
-https://tonyzhaozh.github.io/aloha
-
-## Citation
-
-```bibtex
-@article{zhao2023learning,
-  title={Learning fine-grained bimanual manipulation with low-cost hardware},
-  author={Zhao, Tony Z and Kumar, Vikash and Levine, Sergey and Finn, Chelsea},
-  journal={arXiv preprint arXiv:2304.13705},
-  year={2023}
-}
-```

docs/source/policy_diffusion_README.md

@@ -1,14 +0,0 @@
-## Paper
-
-https://diffusion-policy.cs.columbia.edu
-
-## Citation
-
-```bibtex
-@article{chi2024diffusionpolicy,
-	author = {Cheng Chi and Zhenjia Xu and Siyuan Feng and Eric Cousineau and Yilun Du and Benjamin Burchfiel and Russ Tedrake and Shuran Song},
-	title ={Diffusion Policy: Visuomotor Policy Learning via Action Diffusion},
-	journal = {The International Journal of Robotics Research},
-	year = {2024},
-}
-```

docs/source/policy_smolvla_README.md

@@ -1,14 +0,0 @@
-## Paper
-
-https://arxiv.org/abs/2506.01844
-
-## Citation
-
-```bibtex
-@article{shukor2025smolvla,
-  title={SmolVLA: A Vision-Language-Action Model for Affordable and Efficient Robotics},
-  author={Shukor, Mustafa and Aubakirova, Dana and Capuano, Francesco and Kooijmans, Pepijn and Palma, Steven and Zouitine, Adil and Aractingi, Michel and Pascal, Caroline and Russi, Martino and Marafioti, Andres and Alibert, Simon and Cord, Matthieu and Wolf, Thomas and Cadene, Remi},
-  journal={arXiv preprint arXiv:2506.01844},
-  year={2025}
-}
-```

docs/source/policy_tdmpc_README.md

@@ -1,14 +0,0 @@
-## Paper
-
-https://www.nicklashansen.com/td-mpc/
-
-## Citation
-
-```bibtex
-@inproceedings{Hansen2022tdmpc,
-	title={Temporal Difference Learning for Model Predictive Control},
-	author={Nicklas Hansen and Xiaolong Wang and Hao Su},
-	booktitle={ICML},
-	year={2022}
-}
-```

docs/source/policy_vqbet_README.md

@@ -1,14 +0,0 @@
-## Paper
-
-https://sjlee.cc/vq-bet/
-
-## Citation
-
-```bibtex
-@article{lee2024behavior,
-  title={Behavior generation with latent actions},
-  author={Lee, Seungjae and Wang, Yibin and Etukuru, Haritheja and Kim, H Jin and Shafiullah, Nur Muhammad Mahi and Pinto, Lerrel},
-  journal={arXiv preprint arXiv:2403.03181},
-  year={2024}
-}
-```

docs/source/smolvla.mdx

@@ -1,116 +0,0 @@
-# Finetune SmolVLA
-
-SmolVLA is Hugging Face’s lightweight foundation model for robotics. Designed for easy fine-tuning on LeRobot datasets, it helps accelerate your development!
-
-<p align="center">
-  <img
-    src="https://cdn-uploads.huggingface.co/production/uploads/640e21ef3c82bd463ee5a76d/aooU0a3DMtYmy_1IWMaIM.png"
-    alt="SmolVLA architecture."
-    width="500"
-  />
-  <br />
-  <em>
-    Figure 1. SmolVLA takes as input (i) multiple cameras views, (ii) the
-    robot’s current sensorimotor state, and (iii) a natural language
-    instruction, encoded into contextual features used to condition the action
-    expert when generating an action chunk.
-  </em>
-</p>
-
-## Set Up Your Environment
-
-1. Install LeRobot by following our [Installation Guide](./installation).
-2. Install SmolVLA dependencies by running:
-
-   ```bash
-   pip install -e ".[smolvla]"
-   ```
-
-## Collect a dataset
-
-SmolVLA is a base model, so fine-tuning on your own data is required for optimal performance in your setup.
-We recommend recording ~50 episodes of your task as a starting point. Follow our guide to get started: [Recording a Dataset](https://huggingface.co/docs/lerobot/getting_started_real_world_robot#record-a-dataset)
-
-<Tip>
-
-In your dataset, make sure to have enough demonstrations per each variation (e.g. the cube position on the table if it is cube pick-place task) you are introducing.
-
-We recommend checking out the dataset linked below for reference that was used in the [SmolVLA paper](https://huggingface.co/papers/2506.01844):
-
-🔗 [SVLA SO100 PickPlace](https://huggingface.co/spaces/lerobot/visualize_dataset?path=%2Flerobot%2Fsvla_so100_pickplace%2Fepisode_0)
-
-In this dataset, we recorded 50 episodes across 5 distinct cube positions. For each position, we collected 10 episodes of pick-and-place interactions. This structure, repeating each variation several times, helped the model generalize better. We tried similar dataset with 25 episodes, and it was not enough leading to a bad performance. So, the data quality and quantity is definitely a key.
-After you have your dataset available on the Hub, you are good to go to use our finetuning script to adapt SmolVLA to your application.
-
-</Tip>
-
-## Finetune SmolVLA on your data
-
-Use [`smolvla_base`](https://hf.co/lerobot/smolvla_base), our pretrained 450M model, and fine-tune it on your data.
-Training the model for 20k steps will roughly take ~4 hrs on a single A100 GPU. You should tune the number of steps based on performance and your use-case.
-
-If you don't have a gpu device, you can train using our notebook on [![Google Colab](https://colab.research.google.com/assets/colab-badge.svg)](https://colab.research.google.com/github/huggingface/notebooks/blob/main/lerobot/training-smolvla.ipynb)
-
-Pass your dataset to the training script using `--dataset.repo_id`. If you want to test your installation, run the following command where we use one of the datasets we collected for the [SmolVLA Paper](https://huggingface.co/papers/2506.01844).
-
-```bash
-cd lerobot && lerobot-train \
-  --policy.path=lerobot/smolvla_base \
-  --dataset.repo_id=${HF_USER}/mydataset \
-  --batch_size=64 \
-  --steps=20000 \
-  --output_dir=outputs/train/my_smolvla \
-  --job_name=my_smolvla_training \
-  --policy.device=cuda \
-  --wandb.enable=true
-```
-
-<Tip>
-  You can start with a small batch size and increase it incrementally, if the
-  GPU allows it, as long as loading times remain short.
-</Tip>
-
-Fine-tuning is an art. For a complete overview of the options for finetuning, run
-
-```bash
-lerobot-train --help
-```
-
-<p align="center">
-  <img
-    src="https://cdn-uploads.huggingface.co/production/uploads/640e21ef3c82bd463ee5a76d/S-3vvVCulChREwHDkquoc.gif"
-    alt="Comparison of SmolVLA across task variations."
-    width="500"
-  />
-  <br />
-  <em>
-    Figure 2: Comparison of SmolVLA across task variations. From left to right:
-    (1) pick-place cube counting, (2) pick-place cube counting, (3) pick-place
-    cube counting under perturbations, and (4) generalization on pick-and-place
-    of the lego block with real-world SO101.
-  </em>
-</p>
-
-## Evaluate the finetuned model and run it in real-time
-
-Similarly for when recording an episode, it is recommended that you are logged in to the HuggingFace Hub. You can follow the corresponding steps: [Record a dataset](./getting_started_real_world_robot#record-a-dataset).
-Once you are logged in, you can run inference in your setup by doing:
-
-```bash
-lerobot-record \
-  --robot.type=so101_follower \
-  --robot.port=/dev/ttyACM0 \ # <- Use your port
-  --robot.id=my_blue_follower_arm \ # <- Use your robot id
-  --robot.cameras="{ front: {type: opencv, index_or_path: 8, width: 640, height: 480, fps: 30}}" \ # <- Use your cameras
-  --dataset.single_task="Grasp a lego block and put it in the bin." \ # <- Use the same task description you used in your dataset recording
-  --dataset.repo_id=${HF_USER}/eval_DATASET_NAME_test \  # <- This will be the dataset name on HF Hub
-  --dataset.episode_time_s=50 \
-  --dataset.num_episodes=10 \
-  # <- Teleop optional if you want to teleoperate in between episodes \
-  # --teleop.type=so100_leader \
-  # --teleop.port=/dev/ttyACM0 \
-  # --teleop.id=my_red_leader_arm \
-  --policy.path=HF_USER/FINETUNE_MODEL_NAME # <- Use your fine-tuned model
-```
-
-Depending on your evaluation setup, you can configure the duration and the number of episodes to record for your evaluation suite.

docs/source/so100.mdx

@@ -1,640 +0,0 @@
-# SO-100
-
-In the steps below, we explain how to assemble the SO-100 robot.
-
-## Source the parts
-
-Follow this [README](https://github.com/TheRobotStudio/SO-ARM100/blob/main/SO100.md). It contains the bill of materials, with a link to source the parts, as well as the instructions to 3D print the parts. And advise if it's your first time printing or if you don't own a 3D printer.
-
-## Install LeRobot 🤗
-
-To install LeRobot, follow our [Installation Guide](./installation)
-
-In addition to these instructions, you need to install the Feetech SDK:
-
-```bash
-pip install -e ".[feetech]"
-```
-
-## Configure the motors
-
-**Note:**
-Unlike the SO-101, the motor connectors are not easily accessible once the arm is assembled, so the configuration step must be done beforehand.
-
-### 1. Find the USB ports associated with each arm
-
-To find the port for each bus servo adapter, run this script:
-
-```bash
-lerobot-find-port
-```
-
-<hfoptions id="example">
-<hfoption id="Mac">
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
-Remove the USB cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/tty.usbmodem575E0032081
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/tty.usbmodem575E0032081` corresponding to your leader or follower arm.
-
-</hfoption>
-<hfoption id="Linux">
-
-On Linux, you might need to give access to the USB ports by running:
-
-```bash
-sudo chmod 666 /dev/ttyACM0
-sudo chmod 666 /dev/ttyACM1
-```
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/ttyACM0', '/dev/ttyACM1']
-Remove the usb cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/ttyACM1
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/ttyACM1` corresponding to your leader or follower arm.
-
-</hfoption>
-</hfoptions>
-
-### 2. Set the motors ids and baudrates
-
-Each motor is identified by a unique id on the bus. When brand new, motors usually come with a default id of `1`. For the communication to work properly between the motors and the controller, we first need to set a unique, different id to each motor. Additionally, the speed at which data is transmitted on the bus is determined by the baudrate. In order to talk to each other, the controller and all the motors need to be configured with the same baudrate.
-
-To that end, we first need to connect to each motor individually with the controller in order to set these. Since we will write these parameters in the non-volatile section of the motors' internal memory (EEPROM), we'll only need to do this once.
-
-If you are repurposing motors from another robot, you will probably also need to perform this step as the ids and baudrate likely won't match.
-
-#### Follower
-
-Connect the usb cable from your computer and the power supply to the follower arm's controller board. Then, run the following command or run the API example with the port you got from the previous step. You'll also need to give your leader arm a name with the `id` parameter.
-
-For a visual reference on how to set the motor ids please refer to [this video](https://huggingface.co/docs/lerobot/en/so101#setup-motors-video) where we follow the process for the SO101 arm.
-
-<hfoptions id="setup_motors">
-<hfoption id="Command">
-
-```bash
-lerobot-setup-motors \
-    --robot.type=so100_follower \
-    --robot.port=/dev/tty.usbmodem585A0076841  # <- paste here the port found at previous step
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.robots.so100_follower import SO100Follower, SO100FollowerConfig
-
-config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem585A0076841",
-    id="my_awesome_follower_arm",
-)
-follower = SO100Follower(config)
-follower.setup_motors()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-You should see the following instruction
-
-```
-Connect the controller board to the 'gripper' motor only and press enter.
-```
-
-As instructed, plug the gripper's motor. Make sure it's the only motor connected to the board, and that the motor itself is not yet daisy-chained to any other motor. As you press `[Enter]`, the script will automatically set the id and baudrate for that motor.
-
-<details>
-<summary>Troubleshooting</summary>
-
-If you get an error at that point, check your cables and make sure they are plugged in properly:
-
-<ul>
-  <li>Power supply</li>
-  <li>USB cable between your computer and the controller board</li>
-  <li>The 3-pin cable from the controller board to the motor</li>
-</ul>
-
-If you are using a Waveshare controller board, make sure that the two jumpers are set on the `B` channel (USB).
-
-</details>
-
-You should then see the following message:
-
-```
-'gripper' motor id set to 6
-```
-
-Followed by the next instruction:
-
-```
-Connect the controller board to the 'wrist_roll' motor only and press enter.
-```
-
-You can disconnect the 3-pin cable from the controller board, but you can leave it connected to the gripper motor on the other end, as it will already be in the right place. Now, plug in another 3-pin cable to the wrist roll motor and connect it to the controller board. As with the previous motor, make sure it is the only motor connected to the board and that the motor itself isn't connected to any other one.
-
-Repeat the operation for each motor as instructed.
-
-> [!TIP]
-> Check your cabling at each step before pressing Enter. For instance, the power supply cable might disconnect as you manipulate the board.
-
-When you are done, the script will simply finish, at which point the motors are ready to be used. You can now plug the 3-pin cable from each motor to the next one, and the cable from the first motor (the 'shoulder pan' with id=1) to the controller board, which can now be attached to the base of the arm.
-
-#### Leader
-
-Do the same steps for the leader arm.
-
-<hfoptions id="setup_motors">
-<hfoption id="Command">
-```bash
-lerobot-setup-motors \
-    --teleop.type=so100_leader \
-    --teleop.port=/dev/tty.usbmodem575E0031751  # <- paste here the port found at previous step
-```
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.so100_leader import SO100Leader, SO100LeaderConfig
-
-config = SO100LeaderConfig(
-    port="/dev/tty.usbmodem585A0076841",
-    id="my_awesome_leader_arm",
-)
-leader = SO100Leader(config)
-leader.setup_motors()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-## Step-by-Step Assembly Instructions
-
-## Remove the gears of the 6 leader motors
-
-<details>
-<summary><strong>Video removing gears</strong></summary>
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://github.com/user-attachments/assets/0c95b88c-5b85-413d-ba19-aee2f864f2a7"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-</details>
-
-Follow the video for removing gears. You need to remove the gear for the motors of the leader arm. As a result, you will only use the position encoding of the motor and reduce friction to more easily operate the leader arm.
-
-### Clean Parts
-
-Remove all support material from the 3D-printed parts. The easiest way to do this is using a small screwdriver to get underneath the support material.
-
-### Additional Guidance
-
-<details>
-<summary><strong>Video assembling arms</strong></summary>
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://github.com/user-attachments/assets/488a39de-0189-4461-9de3-05b015f90cca"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-</details>
-
-**Note:**
-This video provides visual guidance for assembling the arms, but it doesn't specify when or how to do the wiring. Inserting the cables beforehand is much easier than doing it afterward. The first arm may take a bit more than 1 hour to assemble, but once you get used to it, you can assemble the second arm in under 1 hour.
-
----
-
-### First Motor
-
-**Step 2: Insert Wires**
-
-- Insert two wires into the first motor.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_1.webp"
-  style="height:300px;"
-/>
-
-**Step 3: Install in Base**
-
-- Place the first motor into the base.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_2.webp"
-  style="height:300px;"
-/>
-
-**Step 4: Secure Motor**
-
-- Fasten the motor with 4 screws. Two from the bottom and two from top.
-
-**Step 5: Attach Motor Holder**
-
-- Slide over the first motor holder and fasten it using two screws (one on each side).
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_4.webp"
-  style="height:300px;"
-/>
-
-**Step 6: Attach Motor Horns**
-
-- Install both motor horns, securing the top horn with a screw. Try not to move the motor position when attaching the motor horn, especially for the leader arms, where we removed the gears.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_5.webp"
-  style="height:300px;"
-/>
-
-<details>
-  <summary>
-    <strong>Video adding motor horn</strong>
-  </summary>
-  <video src="https://github.com/user-attachments/assets/ef3391a4-ad05-4100-b2bd-1699bf86c969"></video>
-</details>
-
-**Step 7: Attach Shoulder Part**
-
-- Route one wire to the back of the robot and the other to the left or towards you (see photo).
-- Attach the shoulder part.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_6.webp"
-  style="height:300px;"
-/>
-
-**Step 8: Secure Shoulder**
-
-- Tighten the shoulder part with 4 screws on top and 4 on the bottom
-  _(access bottom holes by turning the shoulder)._
-
----
-
-### Second Motor Assembly
-
-**Step 9: Install Motor 2**
-
-- Slide the second motor in from the top and link the wire from motor 1 to motor 2.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_8.webp"
-  style="height:300px;"
-/>
-
-**Step 10: Attach Shoulder Holder**
-
-- Add the shoulder motor holder.
-- Ensure the wire from motor 1 to motor 2 goes behind the holder while the other wire is routed upward (see photo).
-- This part can be tight to assemble, you can use a workbench like the image or a similar setup to push the part around the motor.
-
-<div style="display: flex;">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_9.webp"
-    style="height:250px;"
-  />
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_10.webp"
-    style="height:250px;"
-  />
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_12.webp"
-    style="height:250px;"
-  />
-</div>
-
-**Step 11: Secure Motor 2**
-
-- Fasten the second motor with 4 screws.
-
-**Step 12: Attach Motor Horn**
-
-- Attach both motor horns to motor 2, again use the horn screw.
-
-**Step 13: Attach Base**
-
-- Install the base attachment using 2 screws.
-
-<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_11.webp" style="height:300px;">
-
-**Step 14: Attach Upper Arm**
-
-- Attach the upper arm with 4 screws on each side.
-
-<img src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_13.webp" style="height:300px;">
-
----
-
-### Third Motor Assembly
-
-**Step 15: Install Motor 3**
-
-- Route the motor cable from motor 2 through the cable holder to motor 3, then secure motor 3 with 4 screws.
-
-**Step 16: Attach Motor Horn**
-
-- Attach both motor horns to motor 3 and secure one again with a horn screw.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_14.webp"
-  style="height:300px;"
-/>
-
-**Step 17: Attach Forearm**
-
-- Connect the forearm to motor 3 using 4 screws on each side.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_15.webp"
-  style="height:300px;"
-/>
-
----
-
-### Fourth Motor Assembly
-
-**Step 18: Install Motor 4**
-
-- Slide in motor 4, attach the cable from motor 3, and secure the cable in its holder with a screw.
-
-<div style="display: flex;">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_16.webp"
-    style="height:300px;"
-  />
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_19.webp"
-    style="height:300px;"
-  />
-</div>
-
-**Step 19: Attach Motor Holder 4**
-
-- Install the fourth motor holder (a tight fit). Ensure one wire is routed upward and the wire from motor 3 is routed downward (see photo).
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_17.webp"
-  style="height:300px;"
-/>
-
-**Step 20: Secure Motor 4 & Attach Horn**
-
-- Fasten motor 4 with 4 screws and attach its motor horns, use for one a horn screw.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_18.webp"
-  style="height:300px;"
-/>
-
----
-
-### Wrist Assembly
-
-**Step 21: Install Motor 5**
-
-- Insert motor 5 into the wrist holder and secure it with 2 front screws.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_20.webp"
-  style="height:300px;"
-/>
-
-**Step 22: Attach Wrist**
-
-- Connect the wire from motor 4 to motor 5. And already insert the other wire for the gripper.
-- Secure the wrist to motor 4 using 4 screws on both sides.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_22.webp"
-  style="height:300px;"
-/>
-
-**Step 23: Attach Wrist Horn**
-
-- Install only one motor horn on the wrist motor and secure it with a horn screw.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_23.webp"
-  style="height:300px;"
-/>
-
----
-
-### Follower Configuration
-
-**Step 24: Attach Gripper**
-
-- Attach the gripper to motor 5.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_24.webp"
-  style="height:300px;"
-/>
-
-**Step 25: Install Gripper Motor**
-
-- Insert the gripper motor, connect the motor wire from motor 5 to motor 6, and secure it with 3 screws on each side.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_25.webp"
-  style="height:300px;"
-/>
-
-**Step 26: Attach Gripper Horn & Claw**
-
-- Attach the motor horns and again use a horn screw.
-- Install the gripper claw and secure it with 4 screws on both sides.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_26.webp"
-  style="height:300px;"
-/>
-
-**Step 27: Mount Controller**
-
-- Attach the motor controller to the back of the robot.
-
-<div style="display: flex;">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_27.webp"
-    style="height:300px;"
-  />
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_28.webp"
-    style="height:300px;"
-  />
-</div>
-
-_Assembly complete – proceed to Leader arm assembly._
-
----
-
-### Leader Configuration
-
-For the leader configuration, perform **Steps 1–23**. Make sure that you removed the motor gears from the motors.
-
-**Step 24: Attach Leader Holder**
-
-- Mount the leader holder onto the wrist and secure it with a screw.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_29.webp"
-  style="height:300px;"
-/>
-
-**Step 25: Attach Handle**
-
-- Attach the handle to motor 5 using 4 screws.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_30.webp"
-  style="height:300px;"
-/>
-
-**Step 26: Install Gripper Motor**
-
-- Insert the gripper motor, secure it with 3 screws on each side, attach a motor horn using a horn screw, and connect the motor wire.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_31.webp"
-  style="height:300px;"
-/>
-
-**Step 27: Attach Trigger**
-
-- Attach the follower trigger with 4 screws.
-
-<img
-  src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_32.webp"
-  style="height:300px;"
-/>
-
-**Step 28: Mount Controller**
-
-- Attach the motor controller to the back of the robot.
-
-<div style="display: flex;">
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_27.webp"
-    style="height:300px;"
-  />
-  <img
-    src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/so100_assembly_28.webp"
-    style="height:300px;"
-  />
-</div>
-
-## Calibrate
-
-Next, you'll need to calibrate your robot to ensure that the leader and follower arms have the same position values when they are in the same physical position.
-The calibration process is very important because it allows a neural network trained on one robot to work on another.
-
-#### Follower
-
-Run the following command or API example to calibrate the follower arm:
-
-<hfoptions id="calibrate_follower">
-<hfoption id="Command">
-
-```bash
-lerobot-calibrate \
-    --robot.type=so100_follower \
-    --robot.port=/dev/tty.usbmodem58760431551 \ # <- The port of your robot
-    --robot.id=my_awesome_follower_arm # <- Give the robot a unique name
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.robots.so100_follower import SO100FollowerConfig, SO100Follower
-
-config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem585A0076891",
-    id="my_awesome_follower_arm",
-)
-
-follower = SO100Follower(config)
-follower.connect(calibrate=False)
-follower.calibrate()
-follower.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-We unified the calibration method for most robots. Thus, the calibration steps for this SO100 arm are the same as the steps for the Koch and SO101. First, we have to move the robot to the position where each joint is in the middle of its range, then we press `Enter`. Secondly, we move all joints through their full range of motion. A video of this same process for the SO101 as reference can be found [here](https://huggingface.co/docs/lerobot/en/so101#calibration-video)
-
-#### Leader
-
-Do the same steps to calibrate the leader arm, run the following command or API example:
-
-<hfoptions id="calibrate_leader">
-<hfoption id="Command">
-
-```bash
-lerobot-calibrate \
-    --teleop.type=so100_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \ # <- The port of your robot
-    --teleop.id=my_awesome_leader_arm # <- Give the robot a unique name
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.so100_leader import SO100LeaderConfig, SO100Leader
-
-config = SO100LeaderConfig(
-    port="/dev/tty.usbmodem58760431551",
-    id="my_awesome_leader_arm",
-)
-
-leader = SO100Leader(config)
-leader.connect(calibrate=False)
-leader.calibrate()
-leader.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-Congrats 🎉, your robot is all set to learn a task on its own. Start training it by following this tutorial: [Getting started with real-world robots](./getting_started_real_world_robot)
-
-> [!TIP]
-> If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb).

docs/source/so101.mdx

@@ -1,436 +0,0 @@
-# SO-101
-
-In the steps below, we explain how to assemble our flagship robot, the SO-101.
-
-## Source the parts
-
-Follow this [README](https://github.com/TheRobotStudio/SO-ARM100). It contains the bill of materials, with a link to source the parts, as well as the instructions to 3D print the parts.
-And advise if it's your first time printing or if you don't own a 3D printer.
-
-## Install LeRobot 🤗
-
-To install LeRobot, follow our [Installation Guide](./installation)
-
-In addition to these instructions, you need to install the Feetech SDK:
-
-```bash
-pip install -e ".[feetech]"
-```
-
-## Step-by-Step Assembly Instructions
-
-The follower arm uses 6x STS3215 motors with 1/345 gearing. The leader, however, uses three differently geared motors to make sure it can both sustain its own weight and it can be moved without requiring much force. Which motor is needed for which joint is shown in the table below.
-
-| Leader-Arm Axis     | Motor | Gear Ratio |
-| ------------------- | :---: | :--------: |
-| Base / Shoulder Pan |   1   |  1 / 191   |
-| Shoulder Lift       |   2   |  1 / 345   |
-| Elbow Flex          |   3   |  1 / 191   |
-| Wrist Flex          |   4   |  1 / 147   |
-| Wrist Roll          |   5   |  1 / 147   |
-| Gripper             |   6   |  1 / 147   |
-
-### Clean Parts
-
-Remove all support material from the 3D-printed parts. The easiest way to do this is using a small screwdriver to get underneath the support material.
-
-It is advisable to install one 3-pin cable in the motor after placing them before continuing assembly.
-
-### Joint 1
-
-- Place the first motor into the base.
-- Fasten the motor with 4 M2x6mm screws (smallest screws). Two from the top and two from the bottom.
-- Slide over the first motor holder and fasten it using two M2x6mm screws (one on each side).
-- Install both motor horns, securing the top horn with a M3x6mm screw.
-- Attach the shoulder part.
-- Tighten the shoulder part with 4 M3x6mm screws on top and 4 M3x6mm screws on the bottom
-- Add the shoulder motor holder.
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint1_v2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-### Joint 2
-
-- Slide the second motor in from the top.
-- Fasten the second motor with 4 M2x6mm screws.
-- Attach both motor horns to motor 2, again use the M3x6mm horn screw.
-- Attach the upper arm with 4 M3x6mm screws on each side.
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint2_v2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-### Joint 3
-
-- Insert motor 3 and fasten using 4 M2x6mm screws
-- Attach both motor horns to motor 3 and secure one again with a M3x6mm horn screw.
-- Connect the forearm to motor 3 using 4 M3x6mm screws on each side.
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint3_v2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-### Joint 4
-
-- Slide over motor holder 4.
-- Slide in motor 4.
-- Fasten motor 4 with 4 M2x6mm screws and attach its motor horns, use a M3x6mm horn screw.
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint4_v2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-### Joint 5
-
-- Insert motor 5 into the wrist holder and secure it with 2 M2x6mm front screws.
-- Install only one motor horn on the wrist motor and secure it with a M3x6mm horn screw.
-- Secure the wrist to motor 4 using 4 M3x6mm screws on both sides.
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Joint5_v2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-### Gripper / Handle
-
-<hfoptions id="assembly">
-<hfoption id="Follower">
-
-- Attach the gripper to motor 5, attach it to the motor horn on the wrist using 4 M3x6mm screws.
-- Insert the gripper motor and secure it with 2 M2x6mm screws on each side.
-- Attach the motor horns and again use a M3x6mm horn screw.
-- Install the gripper claw and secure it with 4 M3x6mm screws on both sides.
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Gripper_v2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-</hfoption>
-<hfoption id="Leader">
-
-- Mount the leader holder onto the wrist and secure it with 4 M3x6mm screws.
-- Attach the handle to motor 5 using 1 M2x6mm screw.
-- Insert the gripper motor, secure it with 2 M2x6mm screws on each side, attach a motor horn using a M3x6mm horn screw.
-- Attach the follower trigger with 4 M3x6mm screws.
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/Leader_v2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-</hfoption>
-</hfoptions>
-
-## Configure the motors
-
-### 1. Find the USB ports associated with each arm
-
-To find the port for each bus servo adapter, connect MotorBus to your computer via USB and power. Run the following script and disconnect the MotorBus when prompted:
-
-```bash
-lerobot-find-port
-```
-
-<hfoptions id="example">
-<hfoption id="Mac">
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
-Remove the USB cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/tty.usbmodem575E0032081
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/tty.usbmodem575E0032081` corresponding to your leader or follower arm.
-
-</hfoption>
-<hfoption id="Linux">
-
-On Linux, you might need to give access to the USB ports by running:
-
-```bash
-sudo chmod 666 /dev/ttyACM0
-sudo chmod 666 /dev/ttyACM1
-```
-
-Example output:
-
-```
-Finding all available ports for the MotorBus.
-['/dev/ttyACM0', '/dev/ttyACM1']
-Remove the usb cable from your MotorsBus and press Enter when done.
-
-[...Disconnect corresponding leader or follower arm and press Enter...]
-
-The port of this MotorsBus is /dev/ttyACM1
-Reconnect the USB cable.
-```
-
-Where the found port is: `/dev/ttyACM1` corresponding to your leader or follower arm.
-
-</hfoption>
-</hfoptions>
-
-### 2. Set the motors ids and baudrates
-
-Each motor is identified by a unique id on the bus. When brand new, motors usually come with a default id of `1`. For the communication to work properly between the motors and the controller, we first need to set a unique, different id to each motor. Additionally, the speed at which data is transmitted on the bus is determined by the baudrate. In order to talk to each other, the controller and all the motors need to be configured with the same baudrate.
-
-To that end, we first need to connect to each motor individually with the controller in order to set these. Since we will write these parameters in the non-volatile section of the motors' internal memory (EEPROM), we'll only need to do this once.
-
-If you are repurposing motors from another robot, you will probably also need to perform this step as the ids and baudrate likely won't match.
-
-The video below shows the sequence of steps for setting the motor ids.
-
-##### Setup motors video
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/setup_motors_so101_2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-#### Follower
-
-Connect the usb cable from your computer and the power supply to the follower arm's controller board. Then, run the following command or run the API example with the port you got from the previous step. You'll also need to give your leader arm a name with the `id` parameter.
-
-<hfoptions id="setup_motors">
-<hfoption id="Command">
-
-```bash
-lerobot-setup-motors \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem585A0076841  # <- paste here the port found at previous step
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.robots.so101_follower import SO101Follower, SO101FollowerConfig
-
-config = SO101FollowerConfig(
-    port="/dev/tty.usbmodem585A0076841",
-    id="my_awesome_follower_arm",
-)
-follower = SO101Follower(config)
-follower.setup_motors()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-You should see the following instruction
-
-```bash
-Connect the controller board to the 'gripper' motor only and press enter.
-```
-
-As instructed, plug the gripper's motor. Make sure it's the only motor connected to the board, and that the motor itself is not yet daisy-chained to any other motor. As you press `[Enter]`, the script will automatically set the id and baudrate for that motor.
-
-<details>
-<summary>Troubleshooting</summary>
-
-If you get an error at that point, check your cables and make sure they are plugged in properly:
-
-<ul>
-  <li>Power supply</li>
-  <li>USB cable between your computer and the controller board</li>
-  <li>The 3-pin cable from the controller board to the motor</li>
-</ul>
-
-If you are using a Waveshare controller board, make sure that the two jumpers are set on the `B` channel (USB).
-
-</details>
-
-You should then see the following message:
-
-```bash
-'gripper' motor id set to 6
-```
-
-Followed by the next instruction:
-
-```bash
-Connect the controller board to the 'wrist_roll' motor only and press enter.
-```
-
-You can disconnect the 3-pin cable from the controller board, but you can leave it connected to the gripper motor on the other end, as it will already be in the right place. Now, plug in another 3-pin cable to the wrist roll motor and connect it to the controller board. As with the previous motor, make sure it is the only motor connected to the board and that the motor itself isn't connected to any other one.
-
-Repeat the operation for each motor as instructed.
-
-> [!TIP]
-> Check your cabling at each step before pressing Enter. For instance, the power supply cable might disconnect as you manipulate the board.
-
-When you are done, the script will simply finish, at which point the motors are ready to be used. You can now plug the 3-pin cable from each motor to the next one, and the cable from the first motor (the 'shoulder pan' with id=1) to the controller board, which can now be attached to the base of the arm.
-
-#### Leader
-
-Do the same steps for the leader arm.
-
-<hfoptions id="setup_motors">
-<hfoption id="Command">
-
-```bash
-lerobot-setup-motors \
-    --teleop.type=so101_leader \
-    --teleop.port=/dev/tty.usbmodem575E0031751  # <- paste here the port found at previous step
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.so101_leader import SO101Leader, SO101LeaderConfig
-
-config = SO101LeaderConfig(
-    port="/dev/tty.usbmodem585A0076841",
-    id="my_awesome_leader_arm",
-)
-leader = SO101Leader(config)
-leader.setup_motors()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-## Calibrate
-
-Next, you'll need to calibrate your robot to ensure that the leader and follower arms have the same position values when they are in the same physical position.
-The calibration process is very important because it allows a neural network trained on one robot to work on another.
-
-#### Follower
-
-Run the following command or API example to calibrate the follower arm:
-
-<hfoptions id="calibrate_follower">
-<hfoption id="Command">
-
-```bash
-lerobot-calibrate \
-    --robot.type=so101_follower \
-    --robot.port=/dev/tty.usbmodem58760431551 \ # <- The port of your robot
-    --robot.id=my_awesome_follower_arm # <- Give the robot a unique name
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.robots.so101_follower import SO101FollowerConfig, SO101Follower
-
-config = SO101FollowerConfig(
-    port="/dev/tty.usbmodem585A0076891",
-    id="my_awesome_follower_arm",
-)
-
-follower = SO101Follower(config)
-follower.connect(calibrate=False)
-follower.calibrate()
-follower.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-The video below shows how to perform the calibration. First you need to move the robot to the position where all joints are in the middle of their ranges. Then after pressing enter you have to move each joint through its full range of motion.
-
-##### Calibration video
-
-<div class="video-container">
-  <video controls width="600">
-    <source
-      src="https://huggingface.co/datasets/huggingface/documentation-images/resolve/main/lerobot/calibrate_so101_2.mp4"
-      type="video/mp4"
-    />
-  </video>
-</div>
-
-#### Leader
-
-Do the same steps to calibrate the leader arm, run the following command or API example:
-
-<hfoptions id="calibrate_leader">
-<hfoption id="Command">
-
-```bash
-lerobot-calibrate \
-    --teleop.type=so101_leader \
-    --teleop.port=/dev/tty.usbmodem58760431551 \ # <- The port of your robot
-    --teleop.id=my_awesome_leader_arm # <- Give the robot a unique name
-```
-
-</hfoption>
-<hfoption id="API example">
-
-<!-- prettier-ignore-start -->
-```python
-from lerobot.teleoperators.so101_leader import SO101LeaderConfig, SO101Leader
-
-config = SO101LeaderConfig(
-    port="/dev/tty.usbmodem58760431551",
-    id="my_awesome_leader_arm",
-)
-
-leader = SO101Leader(config)
-leader.connect(calibrate=False)
-leader.calibrate()
-leader.disconnect()
-```
-<!-- prettier-ignore-end -->
-
-</hfoption>
-</hfoptions>
-
-Congrats 🎉, your robot is all set to learn a task on its own. Start training it by following this tutorial: [Getting started with real-world robots](./getting_started_real_world_robot)
-
-> [!TIP]
-> If you have any questions or need help, please reach out on [Discord](https://discord.com/invite/s3KuuzsPFb).

examples/1_load_lerobot_dataset.py

@@ -32,7 +32,7 @@ import torch
 from huggingface_hub import HfApi
 
 import lerobot
-from lerobot.datasets.lerobot_dataset import LeRobotDataset, LeRobotDatasetMetadata
+from lerobot.common.datasets.lerobot_dataset import LeRobotDataset, LeRobotDatasetMetadata
 
 # We ported a number of existing datasets ourselves, use this to see the list:
 print("List of available datasets:")

examples/2_evaluate_pretrained_policy.py

@@ -30,7 +30,7 @@ import imageio
 import numpy
 import torch
 
-from lerobot.policies.diffusion.modeling_diffusion import DiffusionPolicy
+from lerobot.common.policies.diffusion.modeling_diffusion import DiffusionPolicy
 
 # Create a directory to store the video of the evaluation
 output_directory = Path("outputs/eval/example_pusht_diffusion")

examples/3_train_policy.py

@@ -22,11 +22,11 @@ from pathlib import Path
 
 import torch
 
+from lerobot.common.datasets.lerobot_dataset import LeRobotDataset, LeRobotDatasetMetadata
+from lerobot.common.datasets.utils import dataset_to_policy_features
+from lerobot.common.policies.diffusion.configuration_diffusion import DiffusionConfig
+from lerobot.common.policies.diffusion.modeling_diffusion import DiffusionPolicy
 from lerobot.configs.types import FeatureType
-from lerobot.datasets.lerobot_dataset import LeRobotDataset, LeRobotDatasetMetadata
-from lerobot.datasets.utils import dataset_to_policy_features
-from lerobot.policies.diffusion.configuration_diffusion import DiffusionConfig
-from lerobot.policies.diffusion.modeling_diffusion import DiffusionPolicy
 
 
 def main():

examples/4_train_policy_with_script.md

@@ -1,10 +1,10 @@
 This tutorial will explain the training script, how to use it, and particularly how to configure everything needed for the training run.
-
 > **Note:** The following assumes you're running these commands on a machine equipped with a cuda GPU. If you don't have one (or if you're using a Mac), you can add `--policy.device=cpu` (`--policy.device=mps` respectively). However, be advised that the code executes much slower on cpu.
 
+
 ## The training script
 
-LeRobot offers a training script at [`lerobot/scripts/train.py`](../src/lerobot/scripts/train.py). At a high level it does the following:
+LeRobot offers a training script at [`lerobot/scripts/train.py`](../lerobot/scripts/train.py). At a high level it does the following:
 
 - Initialize/load a configuration for the following steps using.
 - Instantiates a dataset.
@@ -15,22 +15,17 @@ LeRobot offers a training script at [`lerobot/scripts/train.py`](../src/lerobot/
 ## Overview of the configuration system
 
 In the training script, the main function `train` expects a `TrainPipelineConfig` object:
-
-<!-- prettier-ignore-start -->
 ```python
 # train.py
 @parser.wrap()
 def train(cfg: TrainPipelineConfig):
 ```
-<!-- prettier-ignore-end -->
 
-You can inspect the `TrainPipelineConfig` defined in [`lerobot/configs/train.py`](../src/lerobot/configs/train.py) (which is heavily commented and meant to be a reference to understand any option)
+You can inspect the `TrainPipelineConfig` defined in [`lerobot/configs/train.py`](../lerobot/configs/train.py) (which is heavily commented and meant to be a reference to understand any option)
 
 When running the script, inputs for the command line are parsed thanks to the `@parser.wrap()` decorator and an instance of this class is automatically generated. Under the hood, this is done with [Draccus](https://github.com/dlwh/draccus) which is a tool dedicated to this purpose. If you're familiar with Hydra, Draccus can similarly load configurations from config files (.json, .yaml) and also override their values through command line inputs. Unlike Hydra, these configurations are pre-defined in the code through dataclasses rather than being defined entirely in config files. This allows for more rigorous serialization/deserialization, typing, and to manipulate configuration as objects directly in the code and not as dictionaries or namespaces (which enables nice features in an IDE such as autocomplete, jump-to-def, etc.)
 
 Let's have a look at a simplified example. Amongst other attributes, the training config has the following attributes:
-
-<!-- prettier-ignore-start -->
 ```python
 @dataclass
 class TrainPipelineConfig:
@@ -38,11 +33,7 @@ class TrainPipelineConfig:
     env: envs.EnvConfig | None = None
     policy: PreTrainedConfig | None = None
 ```
-<!-- prettier-ignore-end -->
-
 in which `DatasetConfig` for example is defined as such:
-
-<!-- prettier-ignore-start -->
 ```python
 @dataclass
 class DatasetConfig:
@@ -50,47 +41,42 @@ class DatasetConfig:
     episodes: list[int] | None = None
     video_backend: str = "pyav"
 ```
-<!-- prettier-ignore-end -->
 
 This creates a hierarchical relationship where, for example assuming we have a `cfg` instance of `TrainPipelineConfig`, we can access the `repo_id` value with `cfg.dataset.repo_id`.
 From the command line, we can specify this value by using a very similar syntax `--dataset.repo_id=repo/id`.
 
 By default, every field takes its default value specified in the dataclass. If a field doesn't have a default value, it needs to be specified either from the command line or from a config file – which path is also given in the command line (more in this below). In the example above, the `dataset` field doesn't have a default value which means it must be specified.
 
+
 ## Specifying values from the CLI
 
-Let's say that we want to train [Diffusion Policy](../src/lerobot/policies/diffusion) on the [pusht](https://huggingface.co/datasets/lerobot/pusht) dataset, using the [gym_pusht](https://github.com/huggingface/gym-pusht) environment for evaluation. The command to do so would look like this:
-
+Let's say that we want to train [Diffusion Policy](../lerobot/common/policies/diffusion) on the [pusht](https://huggingface.co/datasets/lerobot/pusht) dataset, using the [gym_pusht](https://github.com/huggingface/gym-pusht) environment for evaluation. The command to do so would look like this:
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --dataset.repo_id=lerobot/pusht \
     --policy.type=diffusion \
     --env.type=pusht
 ```
 
 Let's break this down:
-
 - To specify the dataset, we just need to specify its `repo_id` on the hub which is the only required argument in the `DatasetConfig`. The rest of the fields have default values and in this case we are fine with those so we can just add the option `--dataset.repo_id=lerobot/pusht`.
-- To specify the policy, we can just select diffusion policy using `--policy` appended with `.type`. Here, `.type` is a special argument which allows us to select config classes inheriting from `draccus.ChoiceRegistry` and that have been decorated with the `register_subclass()` method. To have a better explanation of this feature, have a look at this [Draccus demo](https://github.com/dlwh/draccus?tab=readme-ov-file#more-flexible-configuration-with-choice-types). In our code, we use this mechanism mainly to select policies, environments, robots, and some other components like optimizers. The policies available to select are located in [lerobot/policies](../src/lerobot/policies)
-- Similarly, we select the environment with `--env.type=pusht`. The different environment configs are available in [`lerobot/envs/configs.py`](../src/lerobot/envs/configs.py)
-
-Let's see another example. Let's say you've been training [ACT](../src/lerobot/policies/act) on [lerobot/aloha_sim_insertion_human](https://huggingface.co/datasets/lerobot/aloha_sim_insertion_human) using the [gym-aloha](https://github.com/huggingface/gym-aloha) environment for evaluation with:
+- To specify the policy, we can just select diffusion policy using `--policy` appended with `.type`. Here, `.type` is a special argument which allows us to select config classes inheriting from `draccus.ChoiceRegistry` and that have been decorated with the `register_subclass()` method. To have a better explanation of this feature, have a look at this [Draccus demo](https://github.com/dlwh/draccus?tab=readme-ov-file#more-flexible-configuration-with-choice-types). In our code, we use this mechanism mainly to select policies, environments, robots, and some other components like optimizers. The policies available to select are located in [lerobot/common/policies](../lerobot/common/policies)
+- Similarly, we select the environment with `--env.type=pusht`. The different environment configs are available in [`lerobot/common/envs/configs.py`](../lerobot/common/envs/configs.py)
 
+Let's see another example. Let's say you've been training [ACT](../lerobot/common/policies/act) on [lerobot/aloha_sim_insertion_human](https://huggingface.co/datasets/lerobot/aloha_sim_insertion_human) using the [gym-aloha](https://github.com/huggingface/gym-aloha) environment for evaluation with:
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --policy.type=act \
     --dataset.repo_id=lerobot/aloha_sim_insertion_human \
     --env.type=aloha \
     --output_dir=outputs/train/act_aloha_insertion
 ```
-
 > Notice we added `--output_dir` to explicitly tell where to write outputs from this run (checkpoints, training state, configs etc.). This is not mandatory and if you don't specify it, a default directory will be created from the current date and time, env.type and policy.type. This will typically look like `outputs/train/2025-01-24/16-10-05_aloha_act`.
 
 We now want to train a different policy for aloha on another task. We'll change the dataset and use [lerobot/aloha_sim_transfer_cube_human](https://huggingface.co/datasets/lerobot/aloha_sim_transfer_cube_human) instead. Of course, we also need to change the task of the environment as well to match this other task.
-Looking at the [`AlohaEnv`](../src/lerobot/envs/configs.py) config, the task is `"AlohaInsertion-v0"` by default, which corresponds to the task we trained on in the command above. The [gym-aloha](https://github.com/huggingface/gym-aloha?tab=readme-ov-file#description) environment also has the `AlohaTransferCube-v0` task which corresponds to this other task we want to train on. Putting this together, we can train this new policy on this different task using:
-
+Looking at the [`AlohaEnv`](../lerobot/common/envs/configs.py) config, the task is `"AlohaInsertion-v0"` by default, which corresponds to the task we trained on in the command above. The [gym-aloha](https://github.com/huggingface/gym-aloha?tab=readme-ov-file#description) environment also has the `AlohaTransferCube-v0` task which corresponds to this other task we want to train on. Putting this together, we can train this new policy on this different task using:
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --policy.type=act \
     --dataset.repo_id=lerobot/aloha_sim_transfer_cube_human \
     --env.type=aloha \
@@ -101,7 +87,6 @@ lerobot-train \
 ## Loading from a config file
 
 Now, let's assume that we want to reproduce the run just above. That run has produced a `train_config.json` file in its checkpoints, which serializes the `TrainPipelineConfig` instance it used:
-
 ```json
 {
     "dataset": {
@@ -125,42 +110,36 @@ Now, let's assume that we want to reproduce the run just above. That run has pro
 ```
 
 We can then simply load the config values from this file using:
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --config_path=outputs/train/act_aloha_transfer/checkpoints/last/pretrained_model/ \
     --output_dir=outputs/train/act_aloha_transfer_2
 ```
-
 `--config_path` is also a special argument which allows to initialize the config from a local config file. It can point to a directory that contains `train_config.json` or to the config file itself directly.
 
 Similarly to Hydra, we can still override some parameters in the CLI if we want to, e.g.:
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --config_path=outputs/train/act_aloha_transfer/checkpoints/last/pretrained_model/ \
     --output_dir=outputs/train/act_aloha_transfer_2
     --policy.n_action_steps=80
 ```
-
 > Note: While `--output_dir` is not required in general, in this case we need to specify it since it will otherwise take the value from the `train_config.json` (which is `outputs/train/act_aloha_transfer`). In order to prevent accidental deletion of previous run checkpoints, we raise an error if you're trying to write in an existing directory. This is not the case when resuming a run, which is what you'll learn next.
 
 `--config_path` can also accept the repo_id of a repo on the hub that contains a `train_config.json` file, e.g. running:
-
 ```bash
-lerobot-train --config_path=lerobot/diffusion_pusht
+python lerobot/scripts/train.py --config_path=lerobot/diffusion_pusht
 ```
-
 will start a training run with the same configuration used for training [lerobot/diffusion_pusht](https://huggingface.co/lerobot/diffusion_pusht)
 
+
 ## Resume training
 
 Being able to resume a training run is important in case it crashed or aborted for any reason. We'll demonstrate how to do that here.
 
 Let's reuse the command from the previous run and add a few more options:
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --policy.type=act \
     --dataset.repo_id=lerobot/aloha_sim_transfer_cube_human \
     --env.type=aloha \
@@ -171,35 +150,28 @@ lerobot-train \
 ```
 
 Here we've taken care to set up the log frequency and checkpointing frequency to low numbers so we can showcase resumption. You should be able to see some logging and have a first checkpoint within 1 minute (depending on hardware). Wait for the first checkpoint to happen, you should see a line that looks like this in your terminal:
-
 ```
 INFO 2025-01-24 16:10:56 ts/train.py:263 Checkpoint policy after step 100
 ```
-
 Now let's simulate a crash by killing the process (hit `ctrl`+`c`). We can then simply resume this run from the last checkpoint available with:
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --config_path=outputs/train/run_resumption/checkpoints/last/pretrained_model/ \
     --resume=true
 ```
-
 You should see from the logging that your training picks up from where it left off.
 
 Another reason for which you might want to resume a run is simply to extend training and add more training steps. The number of training steps is set by the option `--steps`, which is 100 000 by default.
 You could double the number of steps of the previous run with:
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --config_path=outputs/train/run_resumption/checkpoints/last/pretrained_model/ \
     --resume=true \
     --steps=200000
 ```
 
 ## Outputs of a run
-
 In the output directory, there will be a folder called `checkpoints` with the following structure:
-
 ```bash
 outputs/train/run_resumption/checkpoints
 ├── 000100  # checkpoint_dir for training step 100
@@ -222,9 +194,8 @@ outputs/train/run_resumption/checkpoints
 In addition to the features currently in Draccus, we've added a special `.path` argument for the policy, which allows to load a policy as you would with `PreTrainedPolicy.from_pretrained()`. In that case, `path` can be a local directory that contains a checkpoint or a repo_id pointing to a pretrained policy on the hub.
 
 For example, we could fine-tune a [policy pre-trained on the aloha transfer task](https://huggingface.co/lerobot/act_aloha_sim_transfer_cube_human) on the aloha insertion task. We can achieve this with:
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --policy.path=lerobot/act_aloha_sim_transfer_cube_human \
     --dataset.repo_id=lerobot/aloha_sim_insertion_human \
     --env.type=aloha \
@@ -238,19 +209,15 @@ When doing so, keep in mind that the features of the fine-tuning dataset would h
 When you start the training process, you will first see your full configuration being printed in the terminal. You can check it to make sure that you configured your run correctly. The final configuration will also be saved with the checkpoint.
 
 After that, you will see training log like this one:
-
 ```
 INFO 2024-08-14 13:35:12 ts/train.py:192 step:0 smpl:64 ep:1 epch:0.00 loss:1.112 grdn:15.387 lr:2.0e-07 updt_s:1.738 data_s:4.774
 ```
-
 or evaluation log:
-
 ```
 INFO 2024-08-14 13:38:45 ts/train.py:226 step:100 smpl:6K ep:52 epch:0.25 ∑rwrd:20.693 success:0.0% eval_s:120.266
 ```
 
 These logs will also be saved in wandb if `wandb.enable` is set to `true`. Here are the meaning of some abbreviations:
-
 - `smpl`: number of samples seen during training.
 - `ep`: number of episodes seen during training. An episode contains multiple samples in a complete manipulation task.
 - `epch`: number of time all unique samples are seen (epoch).
@@ -268,35 +235,31 @@ Some metrics are useful for initial performance profiling. For example, if you f
 We'll summarize here the main use cases to remember from this tutorial.
 
 #### Train a policy from scratch – CLI
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --policy.type=act \  # <- select 'act' policy
     --env.type=pusht \  # <- select 'pusht' environment
     --dataset.repo_id=lerobot/pusht  # <- train on this dataset
 ```
 
 #### Train a policy from scratch - config file + CLI
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --config_path=path/to/pretrained_model \  # <- can also be a repo_id
     --policy.n_action_steps=80  # <- you may still override values
 ```
 
 #### Resume/continue a training run
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --config_path=checkpoint/pretrained_model/ \
     --resume=true \
     --steps=200000  # <- you can change some training parameters
 ```
 
 #### Fine-tuning
-
 ```bash
-lerobot-train \
+python lerobot/scripts/train.py \
     --policy.path=lerobot/act_aloha_sim_transfer_cube_human \  # <- can also be a local path to a checkpoint
     --dataset.repo_id=lerobot/aloha_sim_insertion_human \
     --env.type=aloha \

examples/5_control_robot.md

@@ -0,0 +1,998 @@
+# Getting Started with Real-World Robots
+
+This tutorial will guide you through the process of setting up and training a neural network to autonomously control a real robot.
+
+**What You'll Learn:**
+1. How to order and assemble your robot.
+2. How to connect, configure, and calibrate your robot.
+3. How to record and visualize your dataset.
+4. How to train a policy using your data and prepare it for evaluation.
+5. How to evaluate your policy and visualize the results.
+
+By following these steps, you'll be able to replicate tasks like picking up a Lego block and placing it in a bin with a high success rate, as demonstrated in [this video](https://x.com/RemiCadene/status/1814680760592572934).
+
+This tutorial is specifically made for the affordable [Koch v1.1](https://github.com/jess-moss/koch-v1-1) robot, but it contains additional information to be easily adapted to various types of robots like [Aloha bimanual robot](https://aloha-2.github.io) by changing some configurations. The Koch v1.1 consists of a leader arm and a follower arm, each with 6 motors. It can work with one or several cameras to record the scene, which serve as visual sensors for the robot.
+
+During the data collection phase, you will control the follower arm by moving the leader arm. This process is known as "teleoperation." This technique is used to collect robot trajectories. Afterward, you'll train a neural network to imitate these trajectories and deploy the network to enable your robot to operate autonomously.
+
+If you encounter any issues at any step of the tutorial, feel free to seek help on [Discord](https://discord.com/invite/s3KuuzsPFb) or don't hesitate to iterate with us on the tutorial by creating issues or pull requests. Thanks!
+
+## 1. Order and Assemble your Koch v1.1
+
+Follow the sourcing and assembling instructions provided on the [Koch v1.1 Github page](https://github.com/jess-moss/koch-v1-1). This will guide you through setting up both the follower and leader arms, as shown in the image below.
+
+<div style="text-align:center;">
+  <img src="../media/tutorial/koch_v1_1_leader_follower.webp?raw=true" alt="Koch v1.1 leader and follower arms" title="Koch v1.1 leader and follower arms" width="50%">
+</div>
+
+For a visual walkthrough of the assembly process, you can refer to [this video tutorial](https://youtu.be/8nQIg9BwwTk).
+
+## 2. Configure motors, calibrate arms, teleoperate your Koch v1.1
+
+First, install the additional dependencies required for robots built with dynamixel motors like Koch v1.1 by running one of the following commands (make sure gcc is installed).
+
+Using `pip`:
+```bash
+pip install -e ".[dynamixel]"
+```
+
+Using `poetry`:
+```bash
+poetry sync --extras "dynamixel"
+```
+
+Using `uv`:
+```bash
+uv sync --extra "dynamixel"
+```
+
+You are now ready to plug the 5V power supply to the motor bus of the leader arm (the smaller one) since all its motors only require 5V.
+
+Then plug the 12V power supply to the motor bus of the follower arm. It has two motors that need 12V, and the rest will be powered with 5V through the voltage convertor.
+
+Finally, connect both arms to your computer via USB. Note that the USB doesn't provide any power, and both arms need to be plugged in with their associated power supply to be detected by your computer.
+
+Now you are ready to configure your motors for the first time, as detailed in the sections below. In the upcoming sections, you'll learn about our classes and functions by running some python code in an interactive session, or by copy-pasting it in a python file.
+
+If you have already configured your motors the first time, you can streamline the process by directly running the teleoperate script (which is detailed further in the tutorial):
+
+> **NOTE:** To visualize the data, enable `--control.display_data=true`. This streams the data using `rerun`.
+
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=koch \
+  --control.type=teleoperate
+```
+
+It will automatically:
+1. Identify any missing calibrations and initiate the calibration procedure.
+2. Connect the robot and start teleoperation.
+
+### a. Control your motors with DynamixelMotorsBus
+
+You can use the [`DynamixelMotorsBus`](../lerobot/common/robot_devices/motors/dynamixel.py) to communicate with the motors connected as a chain to the corresponding USB bus. This class leverages the Python [Dynamixel SDK](https://emanual.robotis.com/docs/en/software/dynamixel/dynamixel_sdk/sample_code/python_read_write_protocol_2_0/#python-read-write-protocol-20) to facilitate reading from and writing to the motors.
+
+**First Configuration of your motors**
+
+You will need to unplug each motor in turn and run a command the identify the motor. The motor will save its own identification, so you only need to do this once. Start by unplugging all of the motors.
+
+Do the Leader arm first, as all of its motors are of the same type. Plug in your first motor on your leader arm and run this script to set its ID to 1.
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand dynamixel \
+  --model xl330-m288 \
+  --baudrate 1000000 \
+  --id 1
+```
+
+Then unplug your first motor and plug the second motor and set its ID to 2.
+```bash
+python lerobot/scripts/configure_motor.py \
+  --port /dev/tty.usbmodem58760432961 \
+  --brand dynamixel \
+  --model xl330-m288 \
+  --baudrate 1000000 \
+  --id 2
+```
+
+Redo the process for all your motors until ID 6.
+
+The process for the follower arm is almost the same, but the follower arm has two types of motors. For the first two motors, make sure you set the model to `xl430-w250`. _Important: configuring follower motors requires plugging and unplugging power. Make sure you use the 5V power for the XL330s and the 12V power for the XL430s!_
+
+After all of your motors are configured properly, you're ready to plug them all together in a daisy-chain as shown in the original video.
+
+**Instantiate the DynamixelMotorsBus**
+
+To begin, create two instances of the  [`DynamixelMotorsBus`](../lerobot/common/robot_devices/motors/dynamixel.py), one for each arm, using their corresponding USB ports (e.g. `DynamixelMotorsBus(port="/dev/tty.usbmodem575E0031751"`).
+
+To find the correct ports for each arm, run the utility script twice:
+```bash
+python lerobot/scripts/find_motors_bus_port.py
+```
+
+Example output when identifying the leader arm's port (e.g., `/dev/tty.usbmodem575E0031751` on Mac, or possibly `/dev/ttyACM0` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect leader arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0031751
+Reconnect the usb cable.
+```
+
+Example output when identifying the follower arm's port (e.g., `/dev/tty.usbmodem575E0032081`, or possibly `/dev/ttyACM1` on Linux):
+```
+Finding all available ports for the MotorBus.
+['/dev/tty.usbmodem575E0032081', '/dev/tty.usbmodem575E0031751']
+Remove the usb cable from your DynamixelMotorsBus and press Enter when done.
+
+[...Disconnect follower arm and press Enter...]
+
+The port of this DynamixelMotorsBus is /dev/tty.usbmodem575E0032081
+Reconnect the usb cable.
+```
+
+Troubleshooting: On Linux, you might need to give access to the USB ports by running this command with your ports:
+```bash
+sudo chmod 666 /dev/tty.usbmodem575E0032081
+sudo chmod 666 /dev/tty.usbmodem575E0031751
+```
+
+*Listing and Configuring Motors*
+
+Next, you'll need to list the motors for each arm, including their name, index, and model. Initially, each motor is assigned the factory default index `1`. Since each motor requires a unique index to function correctly when connected in a chain on a common bus, you'll need to assign different indices. It's recommended to use an ascending index order, starting from `1` (e.g., `1, 2, 3, 4, 5, 6`). These indices will be saved in the persistent memory of each motor during the first connection.
+
+To assign indices to the motors, run this code in an interactive Python session. Replace the `port` values with the ones you identified earlier:
+```python
+from lerobot.common.robot_devices.motors.configs import DynamixelMotorsBusConfig
+from lerobot.common.robot_devices.motors.dynamixel import DynamixelMotorsBus
+
+leader_config = DynamixelMotorsBusConfig(
+    port="/dev/tty.usbmodem575E0031751",
+    motors={
+        # name: (index, model)
+        "shoulder_pan": (1, "xl330-m077"),
+        "shoulder_lift": (2, "xl330-m077"),
+        "elbow_flex": (3, "xl330-m077"),
+        "wrist_flex": (4, "xl330-m077"),
+        "wrist_roll": (5, "xl330-m077"),
+        "gripper": (6, "xl330-m077"),
+    },
+)
+
+follower_config = DynamixelMotorsBusConfig(
+    port="/dev/tty.usbmodem575E0032081",
+    motors={
+        # name: (index, model)
+        "shoulder_pan": (1, "xl430-w250"),
+        "shoulder_lift": (2, "xl430-w250"),
+        "elbow_flex": (3, "xl330-m288"),
+        "wrist_flex": (4, "xl330-m288"),
+        "wrist_roll": (5, "xl330-m288"),
+        "gripper": (6, "xl330-m288"),
+    },
+)
+
+leader_arm = DynamixelMotorsBus(leader_config)
+follower_arm = DynamixelMotorsBus(follower_config)
+```
+
+IMPORTANTLY: Now that you have your ports, update [`KochRobotConfig`](../lerobot/common/robot_devices/robots/configs.py). You will find something like:
+```python
+@RobotConfig.register_subclass("koch")
+@dataclass
+class KochRobotConfig(ManipulatorRobotConfig):
+    calibration_dir: str = ".cache/calibration/koch"
+    # `max_relative_target` limits the magnitude of the relative positional target vector for safety purposes.
+    # Set this to a positive scalar to have the same value for all motors, or a list that is the same length as
+    # the number of motors in your follower arms.
+    max_relative_target: int | None = None
+
+    leader_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": DynamixelMotorsBusConfig(
+                port="/dev/tty.usbmodem585A0085511", <-- UPDATE HERE
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "xl330-m077"],
+                    "shoulder_lift": [2, "xl330-m077"],
+                    "elbow_flex": [3, "xl330-m077"],
+                    "wrist_flex": [4, "xl330-m077"],
+                    "wrist_roll": [5, "xl330-m077"],
+                    "gripper": [6, "xl330-m077"],
+                },
+            ),
+        }
+    )
+
+    follower_arms: dict[str, MotorsBusConfig] = field(
+        default_factory=lambda: {
+            "main": DynamixelMotorsBusConfig(
+                port="/dev/tty.usbmodem585A0076891", <-- UPDATE HERE
+                motors={
+                    # name: (index, model)
+                    "shoulder_pan": [1, "xl430-w250"],
+                    "shoulder_lift": [2, "xl430-w250"],
+                    "elbow_flex": [3, "xl330-m288"],
+                    "wrist_flex": [4, "xl330-m288"],
+                    "wrist_roll": [5, "xl330-m288"],
+                    "gripper": [6, "xl330-m288"],
+                },
+            ),
+        }
+    )
+```
+
+**Connect and Configure your Motors**
+
+Before you can start using your motors, you'll need to configure them to ensure proper communication. When you first connect the motors, the [`DynamixelMotorsBus`](../lerobot/common/robot_devices/motors/dynamixel.py) automatically detects any mismatch between the current motor indices (factory set to `1`) and the specified indices (e.g., `1, 2, 3, 4, 5, 6`). This triggers a configuration procedure that requires you to unplug the power cord and motors, then reconnect each motor sequentially, starting from the one closest to the bus.
+
+For a visual guide, refer to the [video tutorial of the configuration procedure](https://youtu.be/U78QQ9wCdpY).
+
+To connect and configure the leader arm, run the following code in the same Python interactive session as earlier in the tutorial:
+```python
+leader_arm.connect()
+```
+
+When you connect the leader arm for the first time, you might see an output similar to this:
+```
+Read failed due to communication error on port /dev/tty.usbmodem575E0032081 for group_key ID_shoulder_pan_shoulder_lift_elbow_flex_wrist_flex_wrist_roll_gripper: [TxRxResult] There is no status packet!
+
+/!\ A configuration issue has been detected with your motors:
+If this is the first time you are using these motors, press enter to configure your motors... but before verify that all the cables are connected the proper way. If you find an issue, before making a modification, kill the python process, unplug the power cord to not damage the motors, rewire correctly, then plug the power again and relaunch the script.
+
+Motor indices detected: {9600: [1]}
+
+1. Unplug the power cord
+2. Plug/unplug minimal number of cables to only have the first 1 motor(s) (['shoulder_pan']) connected.
+3. Re-plug the power cord
+Press Enter to continue...
+
+*Follow the procedure*
+
+Setting expected motor indices: [1, 2, 3, 4, 5, 6]
+```
+
+Once the leader arm is configured, repeat the process for the follower arm by running:
+```python
+follower_arm.connect()
+```
+
+Congratulations! Both arms are now properly configured and connected. You won't need to go through the configuration procedure again in the future.
+
+**Troubleshooting**:
+
+If the configuration process fails, you may need to do the configuration process via the Dynamixel Wizard.
+
+Known failure modes:
+- Calling `arm.connect()` raises `OSError: No motor found, but one new motor expected. Verify power cord is plugged in and retry` on Ubuntu 22.
+
+Steps:
+1. Visit https://emanual.robotis.com/docs/en/software/dynamixel/dynamixel_wizard2/#connect-dynamixel.
+2. Follow the software installation instructions in section 3 of the web page.
+3. Launch the software.
+4. Configure the device scanning options in the menu under `Tools` > `Options` > `Scan`. Check only Protocol 2.0, select only the USB port identifier of interest, select all baudrates, set the ID range to `[0, 10]`. _While this step was not strictly necessary, it greatly speeds up scanning_.
+5. For each motor in turn:
+    - Disconnect the power to the driver board.
+    - Connect **only** the motor of interest to the driver board, making sure to disconnect it from any other motors.
+    - Reconnect the power to the driver board.
+    - From the software menu select `Device` > `Scan` and let the scan run. A device should appear.
+    - If the device has an asterisk (*) near it, it means the firmware is indeed outdated. From the software menu, select `Tools` > `Firmware Update`. Follow the prompts.
+    - The main panel should have table with various parameters of the device (refer to the web page, section 5). Select the row with `ID`, and then set the desired ID on the bottom right panel by selecting and clicking `Save`.
+    - Just like you did with the ID, also set the `Baud Rate` to 1 Mbps.
+6. Check everything has been done right:
+   - Rewire the arms in their final configuration and power both of them.
+   - Scan for devices. All 12 motors should appear.
+   - Select the motors one by one and move the arm. Check that the graphical indicator near the top right shows the movement.
+
+** There is a common issue with the Dynamixel XL430-W250 motors where the motors become undiscoverable after upgrading their firmware from Mac and Windows Dynamixel Wizard2 applications.  When this occurs, it is required to do a firmware recovery (Select `DYNAMIXEL Firmware Recovery` and follow the prompts).   There are two known workarounds to conduct this firmware reset:
+  1) Install the Dynamixel Wizard on a linux machine and complete the firmware recovery
+  2) Use the Dynamixel U2D2 in order to perform the reset with Windows or Mac.  This U2D2 can be purchased [here](https://www.robotis.us/u2d2/).
+  For either solution, open DYNAMIXEL Wizard 2.0 and select the appropriate port. You will likely be unable to see the motor in the GUI at this time. Select `Firmware Recovery`, carefully choose the correct model, and wait for the process to complete. Finally, re-scan to confirm the firmware recovery was successful.
+
+**Read and Write with DynamixelMotorsBus**
+
+To get familiar with how `DynamixelMotorsBus` communicates with the motors, you can start by reading data from them. Copy past this code in the same interactive python session:
+```python
+leader_pos = leader_arm.read("Present_Position")
+follower_pos = follower_arm.read("Present_Position")
+print(leader_pos)
+print(follower_pos)
+```
+
+Expected output might look like:
+```
+array([2054,  523, 3071, 1831, 3049, 2441], dtype=int32)
+array([2003, 1601,   56, 2152, 3101, 2283], dtype=int32)
+```
+
+Try moving the arms to various positions and observe how the values change.
+
+Now let's try to enable torque in the follower arm by copy pasting this code:
+```python
+from lerobot.common.robot_devices.motors.dynamixel import TorqueMode
+
+follower_arm.write("Torque_Enable", TorqueMode.ENABLED.value)
+```
+
+With torque enabled, the follower arm will be locked in its current position. Do not attempt to manually move the arm while torque is enabled, as this could damage the motors.
+
+Now, to get more familiar with reading and writing, let's move the arm programmatically copy pasting the following example code:
+```python
+# Get the current position
+position = follower_arm.read("Present_Position")
+
+# Update first motor (shoulder_pan) position by +10 steps
+position[0] += 10
+follower_arm.write("Goal_Position", position)
+
+# Update all motors position by -30 steps
+position -= 30
+follower_arm.write("Goal_Position", position)
+
+# Update gripper by +30 steps
+position[-1] += 30
+follower_arm.write("Goal_Position", position[-1], "gripper")
+```
+
+When you're done playing, you can try to disable the torque, but make sure you hold your robot so that it doesn't fall:
+```python
+follower_arm.write("Torque_Enable", TorqueMode.DISABLED.value)
+```
+
+Finally, disconnect the arms:
+```python
+leader_arm.disconnect()
+follower_arm.disconnect()
+```
+
+Alternatively, you can unplug the power cord, which will automatically disable torque and disconnect the motors.
+
+*/!\ Warning*: These motors tend to overheat, especially under torque or if left plugged in for too long. Unplug after use.
+
+### b. Teleoperate your Koch v1.1 with ManipulatorRobot
+
+**Instantiate the ManipulatorRobot**
+
+Before you can teleoperate your robot, you need to instantiate the  [`ManipulatorRobot`](../lerobot/common/robot_devices/robots/manipulator.py) using the previously defined `leader_config` and `follower_config`.
+
+For the Koch v1.1 robot, we only have one leader, so we refer to it as `"main"` and define it as `leader_arms={"main": leader_config}`. We do the same for the follower arm. For other robots (like the Aloha), which may have two pairs of leader and follower arms, you would define them like this: `leader_arms={"left": left_leader_config, "right": right_leader_config},`. Same thing for the follower arms.
+
+
+Run the following code to instantiate your manipulator robot:
+```python
+from lerobot.common.robot_devices.robots.configs import KochRobotConfig
+from lerobot.common.robot_devices.robots.manipulator import ManipulatorRobot
+
+robot_config = KochRobotConfig(
+    leader_arms={"main": leader_config},
+    follower_arms={"main": follower_config},
+    cameras={},  # We don't use any camera for now
+)
+robot = ManipulatorRobot(robot_config)
+```
+
+The `KochRobotConfig` is used to set the associated settings and calibration process. For instance, we activate the torque of the gripper of the leader Koch v1.1 arm and position it at a 40 degree angle to use it as a trigger.
+
+For the [Aloha bimanual robot](https://aloha-2.github.io), we would use `AlohaRobotConfig` to set different settings such as a secondary ID for shadow joints (shoulder, elbow). Specific to Aloha, LeRobot comes with default calibration files stored in `.cache/calibration/aloha_default`. Assuming the motors have been properly assembled, no manual calibration step is expected for Aloha.
+
+**Calibrate and Connect the ManipulatorRobot**
+
+Next, you'll need to calibrate your Koch robot to ensure that the leader and follower arms have the same position values when they are in the same physical position. This calibration is essential because it allows a neural network trained on one Koch robot to work on another.
+
+When you connect your robot for the first time, the [`ManipulatorRobot`](../lerobot/common/robot_devices/robots/manipulator.py) will detect if the calibration file is missing and trigger the calibration procedure. During this process, you will be guided to move each arm to three different positions.
+
+Here are the positions you'll move the follower arm to:
+
+| 1. Zero position                                                                                                                                                  | 2. Rotated position                                                                                                                                                        | 3. Rest position                                                                                                                                                  |
+| ----------------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| <img src="../media/koch/follower_zero.webp?raw=true" alt="Koch v1.1 follower arm zero position" title="Koch v1.1 follower arm zero position" style="width:100%;"> | <img src="../media/koch/follower_rotated.webp?raw=true" alt="Koch v1.1 follower arm rotated position" title="Koch v1.1 follower arm rotated position" style="width:100%;"> | <img src="../media/koch/follower_rest.webp?raw=true" alt="Koch v1.1 follower arm rest position" title="Koch v1.1 follower arm rest position" style="width:100%;"> |
+
+And here are the corresponding positions for the leader arm:
+
+| 1. Zero position                                                                                                                                            | 2. Rotated position                                                                                                                                                  | 3. Rest position                                                                                                                                            |
+| ----------------------------------------------------------------------------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------- |
+| <img src="../media/koch/leader_zero.webp?raw=true" alt="Koch v1.1 leader arm zero position" title="Koch v1.1 leader arm zero position" style="width:100%;"> | <img src="../media/koch/leader_rotated.webp?raw=true" alt="Koch v1.1 leader arm rotated position" title="Koch v1.1 leader arm rotated position" style="width:100%;"> | <img src="../media/koch/leader_rest.webp?raw=true" alt="Koch v1.1 leader arm rest position" title="Koch v1.1 leader arm rest position" style="width:100%;"> |
+
+You can watch a [video tutorial of the calibration procedure](https://youtu.be/8drnU9uRY24) for more details.
+
+During calibration, we count the number of full 360-degree rotations your motors have made since they were first used. That's why we ask you to move to this arbitrary "zero" position. We don't actually "set" the zero position, so you don't need to be accurate. After calculating these "offsets" to shift the motor values around 0, we need to assess the rotation direction of each motor, which might differ. That's why we ask you to rotate all motors to roughly 90 degrees, to measure if the values changed negatively or positively.
+
+Finally, the rest position ensures that the follower and leader arms are roughly aligned after calibration, preventing sudden movements that could damage the motors when starting teleoperation.
+
+Importantly, once calibrated, all Koch robots will move to the same positions (e.g. zero and rotated position) when commanded.
+
+Run the following code to calibrate and connect your robot:
+```python
+robot.connect()
+```
+
+The output will look like this:
+```
+Connecting main follower arm
+Connecting main leader arm
+
+Missing calibration file '.cache/calibration/koch/main_follower.json'
+Running calibration of koch main follower...
+Move arm to zero position
+[...]
+Move arm to rotated position
+[...]
+Move arm to rest position
+[...]
+Calibration is done! Saving calibration file '.cache/calibration/koch/main_follower.json'
+
+Missing calibration file '.cache/calibration/koch/main_leader.json'
+Running calibration of koch main leader...
+Move arm to zero position
+[...]
+Move arm to rotated position
+[...]
+Move arm to rest position
+[...]
+Calibration is done! Saving calibration file '.cache/calibration/koch/main_leader.json'
+```
+
+*Verifying Calibration*
+
+Once calibration is complete, you can check the positions of the leader and follower arms to ensure they match. If the calibration was successful, the positions should be very similar.
+
+Run this code to get the positions in degrees:
+```python
+leader_pos = robot.leader_arms["main"].read("Present_Position")
+follower_pos = robot.follower_arms["main"].read("Present_Position")
+
+print(leader_pos)
+print(follower_pos)
+```
+
+Example output:
+```
+array([-0.43945312, 133.94531, 179.82422, -18.984375, -1.9335938, 34.541016], dtype=float32)
+array([-0.58723712, 131.72314, 174.98743, -16.872612, 0.786213, 35.271973], dtype=float32)
+```
+
+These values are in degrees, which makes them easier to interpret and debug. The zero position used during calibration should roughly correspond to 0 degrees for each motor, and the rotated position should roughly correspond to 90 degrees for each motor.
+
+**Teleoperate your Koch v1.1**
+
+You can easily teleoperate your robot by reading the positions from the leader arm and sending them as goal positions to the follower arm.
+
+To teleoperate your robot for 30 seconds at a frequency of approximately 200Hz, run the following code:
+```python
+import tqdm
+seconds = 30
+frequency = 200
+for _ in tqdm.tqdm(range(seconds*frequency)):
+    leader_pos = robot.leader_arms["main"].read("Present_Position")
+    robot.follower_arms["main"].write("Goal_Position", leader_pos)
+```
+
+*Using `teleop_step` for Teleoperation*
+
+Alternatively, you can teleoperate the robot using the `teleop_step` method from [`ManipulatorRobot`](../lerobot/common/robot_devices/robots/manipulator.py).
+
+Run this code to teleoperate:
+```python
+for _ in tqdm.tqdm(range(seconds*frequency)):
+    robot.teleop_step()
+```
+
+*Recording data during Teleoperation*
+
+Teleoperation is particularly useful for recording data. You can use the `teleop_step(record_data=True)` to returns both the follower arm's position as `"observation.state"` and the leader arm's position as `"action"`. This function also converts the numpy arrays into PyTorch tensors. If you're working with a robot that has two leader and two follower arms (like the Aloha), the positions are concatenated.
+
+Run the following code to see how slowly moving the leader arm affects the observation and action:
+```python
+leader_pos = robot.leader_arms["main"].read("Present_Position")
+follower_pos = robot.follower_arms["main"].read("Present_Position")
+observation, action = robot.teleop_step(record_data=True)
+
+print(follower_pos)
+print(observation)
+print(leader_pos)
+print(action)
+```
+
+Expected output:
+```
+array([7.8223, 131.1328, 165.5859, -23.4668, -0.9668, 32.4316], dtype=float32)
+{'observation.state': tensor([7.8223, 131.1328, 165.5859, -23.4668, -0.9668, 32.4316])}
+array([3.4277, 134.1211, 179.8242, -18.5449, -1.5820, 34.7168], dtype=float32)
+{'action': tensor([3.4277, 134.1211, 179.8242, -18.5449, -1.5820, 34.7168])}
+```
+
+*Asynchronous Frame Recording*
+
+Additionally, `teleop_step` can asynchronously record frames from multiple cameras and include them in the observation dictionary as `"observation.images.CAMERA_NAME"`. This feature will be covered in more detail in the next section.
+
+*Disconnecting the Robot*
+
+When you're finished, make sure to disconnect your robot by running:
+```python
+robot.disconnect()
+```
+
+Alternatively, you can unplug the power cord, which will also disable torque.
+
+*/!\ Warning*: These motors tend to overheat, especially under torque or if left plugged in for too long. Unplug after use.
+
+### c. Add your cameras with OpenCVCamera
+
+**(Optional) Use your phone as camera on Linux**
+
+If you want to use your phone as a camera on Linux, follow these steps to set up a virtual camera
+
+1. *Install `v4l2loopback-dkms` and `v4l-utils`*. Those packages are required to create virtual camera devices (`v4l2loopback`) and verify their settings with the `v4l2-ctl` utility from `v4l-utils`. Install them using:
+```python
+sudo apt install v4l2loopback-dkms v4l-utils
+```
+2. *Install [DroidCam](https://droidcam.app) on your phone*. This app is available for both iOS and Android.
+3. *Install [OBS Studio](https://obsproject.com)*. This software will help you manage the camera feed. Install it using [Flatpak](https://flatpak.org):
+```python
+flatpak install flathub com.obsproject.Studio
+```
+4. *Install the DroidCam OBS plugin*. This plugin integrates DroidCam with OBS Studio. Install it with:
+```python
+flatpak install flathub com.obsproject.Studio.Plugin.DroidCam
+```
+5. *Start OBS Studio*. Launch with:
+```python
+flatpak run com.obsproject.Studio
+```
+6. *Add your phone as a source*. Follow the instructions [here](https://droidcam.app/obs/usage). Be sure to set the resolution to `640x480`.
+7. *Adjust resolution settings*. In OBS Studio, go to `File > Settings > Video`. Change the `Base(Canvas) Resolution` and the `Output(Scaled) Resolution` to `640x480` by manually typing it in.
+8. *Start virtual camera*. In OBS Studio, follow the instructions [here](https://obsproject.com/kb/virtual-camera-guide).
+9. *Verify the virtual camera setup*. Use `v4l2-ctl` to list the devices:
+```python
+v4l2-ctl --list-devices
+```
+You should see an entry like:
+```
+VirtualCam (platform:v4l2loopback-000):
+/dev/video1
+```
+10. *Check the camera resolution*. Use `v4l2-ctl` to ensure that the virtual camera output resolution is `640x480`. Change `/dev/video1` to the port of your virtual camera from the output of `v4l2-ctl --list-devices`.
+```python
+v4l2-ctl -d /dev/video1 --get-fmt-video
+```
+You should see an entry like:
+```
+>>> Format Video Capture:
+>>>	Width/Height      : 640/480
+>>>	Pixel Format      : 'YUYV' (YUYV 4:2:2)
+```
+
+Troubleshooting: If the resolution is not correct you will have to delete the Virtual Camera port and try again as it cannot be changed.
+
+If everything is set up correctly, you can proceed with the rest of the tutorial.
+
+**(Optional) Use your iPhone as a camera on MacOS**
+
+To use your iPhone as a camera on macOS, enable the Continuity Camera feature:
+- Ensure your Mac is running macOS 13 or later, and your iPhone is on iOS 16 or later.
+- Sign in both devices with the same Apple ID.
+- Connect your devices with a USB cable or turn on Wi-Fi and Bluetooth for a wireless connection.
+
+For more details, visit [Apple support](https://support.apple.com/en-gb/guide/mac-help/mchl77879b8a/mac).
+
+Your iPhone should be detected automatically when running the camera setup script in the next section.
+
+**Instantiate an OpenCVCamera**
+
+The [`OpenCVCamera`](../lerobot/common/robot_devices/cameras/opencv.py) class allows you to efficiently record frames from most cameras using the [`opencv2`](https://docs.opencv.org) library.  For more details on compatibility, see [Video I/O with OpenCV Overview](https://docs.opencv.org/4.x/d0/da7/videoio_overview.html).
+
+To instantiate an [`OpenCVCamera`](../lerobot/common/robot_devices/cameras/opencv.py), you need a camera index (e.g. `OpenCVCamera(camera_index=0)`). When you only have one camera like a webcam of a laptop, the camera index is usually `0` but it might differ, and the camera index might change if you reboot your computer or re-plug your camera. This behavior depends on your operating system.
+
+To find the camera indices, run the following utility script, which will save a few frames from each detected camera:
+```bash
+python lerobot/common/robot_devices/cameras/opencv.py \
+    --images-dir outputs/images_from_opencv_cameras
+```
+
+The output will look something like this if you have two cameras connected:
+```
+Mac or Windows detected. Finding available camera indices through scanning all indices from 0 to 60
+[...]
+Camera found at index 0
+Camera found at index 1
+[...]
+Connecting cameras
+OpenCVCamera(0, fps=30.0, width=1920.0, height=1080.0, color_mode=rgb)
+OpenCVCamera(1, fps=24.0, width=1920.0, height=1080.0, color_mode=rgb)
+Saving images to outputs/images_from_opencv_cameras
+Frame: 0000	Latency (ms): 39.52
+[...]
+Frame: 0046	Latency (ms): 40.07
+Images have been saved to outputs/images_from_opencv_cameras
+```
+
+Check the saved images in `outputs/images_from_opencv_cameras` to identify which camera index corresponds to which physical camera (e.g. `0` for `camera_00` or `1` for `camera_01`):
+```
+camera_00_frame_000000.png
+[...]
+camera_00_frame_000047.png
+camera_01_frame_000000.png
+[...]
+camera_01_frame_000047.png
+```
+
+Note: Some cameras may take a few seconds to warm up, and the first frame might be black or green.
+
+Finally, run this code to instantiate and connect your camera:
+```python
+from lerobot.common.robot_devices.cameras.configs import OpenCVCameraConfig
+from lerobot.common.robot_devices.cameras.opencv import OpenCVCamera
+
+config = OpenCVCameraConfig(camera_index=0)
+camera = OpenCVCamera(config)
+camera.connect()
+color_image = camera.read()
+
+print(color_image.shape)
+print(color_image.dtype)
+```
+
+Expected output for a laptop camera on MacBookPro:
+```
+(1080, 1920, 3)
+uint8
+```
+
+Or like this if you followed our tutorial to set a virtual camera:
+```
+(480, 640, 3)
+uint8
+```
+
+With certain camera, you can also specify additional parameters like frame rate, resolution, and color mode during instantiation. For instance:
+```python
+config = OpenCVCameraConfig(camera_index=0, fps=30, width=640, height=480)
+```
+
+If the provided arguments are not compatible with the camera, an exception will be raised.
+
+*Disconnecting the camera*
+
+When you're done using the camera, disconnect it by running:
+```python
+camera.disconnect()
+```
+
+**Instantiate your robot with cameras**
+
+Additionally, you can set up your robot to work with your cameras.
+
+Modify the following Python code with the appropriate camera names and configurations:
+```python
+robot = ManipulatorRobot(
+    KochRobotConfig(
+        leader_arms={"main": leader_arm},
+        follower_arms={"main": follower_arm},
+        calibration_dir=".cache/calibration/koch",
+        cameras={
+            "laptop": OpenCVCameraConfig(0, fps=30, width=640, height=480),
+            "phone": OpenCVCameraConfig(1, fps=30, width=640, height=480),
+        },
+    )
+)
+robot.connect()
+```
+
+As a result, `teleop_step(record_data=True` will return a frame for each camera following the pytorch "channel first" convention but we keep images in `uint8` with pixels in range [0,255] to easily save them.
+
+Modify this code with the names of your cameras and run it:
+```python
+observation, action = robot.teleop_step(record_data=True)
+print(observation["observation.images.laptop"].shape)
+print(observation["observation.images.phone"].shape)
+print(observation["observation.images.laptop"].min().item())
+print(observation["observation.images.laptop"].max().item())
+```
+
+The output should look like this:
+```
+torch.Size([3, 480, 640])
+torch.Size([3, 480, 640])
+0
+255
+```
+
+### d. Use `control_robot.py` and our `teleoperate` function
+
+Instead of manually running the python code in a terminal window, you can use [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) to instantiate your robot by providing the robot configurations via command line and control your robot with various modes as explained next.
+
+Try running this code to teleoperate your robot (if you dont have a camera, keep reading):
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=koch \
+  --control.type=teleoperate
+```
+
+You will see a lot of lines appearing like this one:
+```
+INFO 2024-08-10 11:15:03 ol_robot.py:209 dt: 5.12 (195.1hz) dtRlead: 4.93 (203.0hz) dtWfoll: 0.19 (5239.0hz)
+```
+
+It contains
+- `2024-08-10 11:15:03` which is the date and time of the call to the print function.
+- `ol_robot.py:209` which is the end of the file name and the line number where the print function is called  (`lerobot/scripts/control_robot.py` line `209`).
+- `dt: 5.12 (195.1hz)` which is the "delta time" or the number of milliseconds spent between the previous call to `robot.teleop_step()` and the current one, associated with the frequency (5.12 ms equals 195.1 Hz) ; note that you can control the maximum frequency by adding fps as argument such as `--fps 30`.
+- `dtRlead: 4.93 (203.0hz)` which is the number of milliseconds it took to read the position of the leader arm using `leader_arm.read("Present_Position")`.
+- `dtWfoll: 0.22 (4446.9hz)` which is the number of milliseconds it took to set a new goal position for the follower arm using `follower_arm.write("Goal_position", leader_pos)` ; note that writing is done asynchronously so it takes less time than reading.
+
+Importantly: If you don't have any camera, you can remove them dynamically with this [draccus](https://github.com/dlwh/draccus) syntax `--robot.cameras='{}'`:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=koch \
+  --robot.cameras='{}' \
+  --control.type=teleoperate
+```
+
+We advise to create a new yaml file when the command becomes too long.
+
+## 3. Record your Dataset and Visualize it
+
+Using what you've learned previously, you can now easily record a dataset of states and actions for one episode. You can use `busy_wait` to control the speed of teleoperation and record at a fixed `fps` (frame per seconds).
+
+Try this code to record 30 seconds at 60 fps:
+```python
+import time
+from lerobot.scripts.control_robot import busy_wait
+
+record_time_s = 30
+fps = 60
+
+states = []
+actions = []
+for _ in range(record_time_s * fps):
+    start_time = time.perf_counter()
+    observation, action = robot.teleop_step(record_data=True)
+
+    states.append(observation["observation.state"])
+    actions.append(action["action"])
+
+    dt_s = time.perf_counter() - start_time
+    busy_wait(1 / fps - dt_s)
+
+# Note that observation and action are available in RAM, but
+# you could potentially store them on disk with pickle/hdf5 or
+# our optimized format `LeRobotDataset`. More on this next.
+```
+
+Importantly, many utilities are still missing. For instance, if you have cameras, you will need to save the images on disk to not go out of RAM, and to do so in threads to not slow down communication with your robot. Also, you will need to store your data in a format optimized for training and web sharing like [`LeRobotDataset`](../lerobot/common/datasets/lerobot_dataset.py). More on this in the next section.
+
+### a. Use the `record` function
+
+You can use the `record` function from [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) to achieve efficient data recording. It encompasses many recording utilities:
+1. Frames from cameras are saved on disk in threads, and encoded into videos at the end of each episode recording.
+2. Video streams from cameras are displayed in window so that you can verify them.
+3. Data is stored with [`LeRobotDataset`](../lerobot/common/datasets/lerobot_dataset.py) format which is pushed to your Hugging Face page (unless `--control.push_to_hub=false` is provided).
+4. Checkpoints are done during recording, so if any issue occurs, you can resume recording by re-running the same command again with `--control.resume=true`. You will need to manually delete the dataset directory if you want to start recording from scratch.
+5. Set the flow of data recording using command line arguments:
+   - `--control.warmup_time_s=10` defines the number of seconds before starting data collection. It allows the robot devices to warmup and synchronize (10 seconds by default).
+   - `--control.episode_time_s=60` defines the number of seconds for data recording for each episode (60 seconds by default).
+   - `--control.reset_time_s=60` defines the number of seconds for resetting the environment after each episode (60 seconds by default).
+   - `--control.num_episodes=50` defines the number of episodes to record (50 by default).
+6. Control the flow during data recording using keyboard keys:
+   - Press right arrow `->` at any time during episode recording to early stop and go to resetting. Same during resetting, to early stop and to go to the next episode recording.
+   - Press left arrow `<-` at any time during episode recording or resetting to early stop, cancel the current episode, and re-record it.
+   - Press escape `ESC` at any time during episode recording to end the session early and go straight to video encoding and dataset uploading.
+7. Similarly to `teleoperate`, you can also use the command line to override anything.
+
+Before trying `record`, if you want to push your dataset to the hub, make sure you've logged in using a write-access token, which can be generated from the [Hugging Face settings](https://huggingface.co/settings/tokens):
+```bash
+huggingface-cli login --token ${HUGGINGFACE_TOKEN} --add-to-git-credential
+```
+Also, store your Hugging Face repository name in a variable (e.g. `cadene` or `lerobot`). For instance, run this to use your Hugging Face user name as repository:
+```bash
+HF_USER=$(huggingface-cli whoami | head -n 1)
+echo $HF_USER
+```
+If you don't want to push to hub, use `--control.push_to_hub=false`.
+
+Now run this to record 2 episodes:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=koch \
+  --control.type=record \
+  --control.single_task="Grasp a lego block and put it in the bin." \
+  --control.fps=30 \
+  --control.repo_id=${HF_USER}/koch_test \
+  --control.tags='["tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=2 \
+  --control.push_to_hub=true
+```
+
+
+This will write your dataset locally to `~/.cache/huggingface/lerobot/{repo-id}` (e.g. `data/cadene/koch_test`) and push it on the hub at `https://huggingface.co/datasets/{HF_USER}/{repo-id}`. Your dataset will be automatically tagged with `LeRobot` for the community to find it easily, and you can also add custom tags (in this case `tutorial` for example).
+
+You can look for other LeRobot datasets on the hub by searching for `LeRobot` tags: https://huggingface.co/datasets?other=LeRobot
+
+You will see a lot of lines appearing like this one:
+```
+INFO 2024-08-10 15:02:58 ol_robot.py:219 dt:33.34 (30.0hz) dtRlead: 5.06 (197.5hz) dtWfoll: 0.25 (3963.7hz) dtRfoll: 6.22 (160.7hz) dtRlaptop: 32.57 (30.7hz) dtRphone: 33.84 (29.5hz)
+```
+It contains:
+- `2024-08-10 15:02:58` which is the date and time of the call to the print function,
+- `ol_robot.py:219` which is the end of the file name and the line number where the print function is called  (`lerobot/scripts/control_robot.py` line `219`).
+- `dt:33.34 (30.0hz)` which is the "delta time" or the number of milliseconds spent between the previous call to `robot.teleop_step(record_data=True)` and the current one, associated with the frequency (33.34 ms equals 30.0 Hz) ; note that we use `--fps 30` so we expect 30.0 Hz ; when a step takes more time, the line appears in yellow.
+- `dtRlead: 5.06 (197.5hz)` which is the delta time of reading the present position of the leader arm.
+- `dtWfoll: 0.25 (3963.7hz)` which is the delta time of writing the goal position on the follower arm ; writing is asynchronous so it takes less time than reading.
+- `dtRfoll: 6.22 (160.7hz)` which is the delta time of reading the present position on the follower arm.
+- `dtRlaptop:32.57 (30.7hz) ` which is the delta time of capturing an image from the laptop camera in the thread running asynchronously.
+- `dtRphone:33.84 (29.5hz)` which is the delta time of capturing an image from the phone camera in the thread running asynchronously.
+
+Troubleshooting:
+- On Linux, if the left and right arrow keys and escape key don't have any effect during data recording, make sure you've set the `$DISPLAY` environment variable. See [pynput limitations](https://pynput.readthedocs.io/en/latest/limitations.html#linux).
+
+At the end of data recording, your dataset will be uploaded on your Hugging Face page (e.g. https://huggingface.co/datasets/cadene/koch_test) that you can obtain by running:
+```bash
+echo https://huggingface.co/datasets/${HF_USER}/koch_test
+```
+
+### b. Advice for recording dataset
+
+Once you're comfortable with data recording, it's time to create a larger dataset for training. A good starting task is grasping an object at different locations and placing it in a bin. We suggest recording at least 50 episodes, with 10 episodes per location. Keep the cameras fixed and maintain consistent grasping behavior throughout the recordings.
+
+In the following sections, you’ll train your neural network. After achieving reliable grasping performance, you can start introducing more variations during data collection, such as additional grasp locations, different grasping techniques, and altering camera positions.
+
+Avoid adding too much variation too quickly, as it may hinder your results.
+
+In the coming months, we plan to release a foundational model for robotics. We anticipate that fine-tuning this model will enhance generalization, reducing the need for strict consistency during data collection.
+
+### c. Visualize all episodes
+
+You can visualize your dataset by running:
+```bash
+python lerobot/scripts/visualize_dataset_html.py \
+  --repo-id ${HF_USER}/koch_test
+```
+
+Note: You might need to add `--local-files-only 1` if your dataset was not uploaded to hugging face hub.
+
+This will launch a local web server that looks like this:
+<div style="text-align:center;">
+  <img src="../media/tutorial/visualize_dataset_html.webp?raw=true" alt="Koch v1.1 leader and follower arms" title="Koch v1.1 leader and follower arms" width="100%">
+</div>
+
+### d. Replay episode on your robot with the `replay` function
+
+A useful feature of [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) is the `replay` function, which allows to replay on your robot any episode that you've recorded or episodes from any dataset out there. This function helps you test the repeatability of your robot's actions and assess transferability across robots of the same model.
+
+To replay the first episode of the dataset you just recorded, run the following command:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=koch \
+  --control.type=replay \
+  --control.fps=30 \
+  --control.repo_id=${HF_USER}/koch_test \
+  --control.episode=0
+```
+
+Your robot should replicate movements similar to those you recorded. For example, check out [this video](https://x.com/RemiCadene/status/1793654950905680090) where we use `replay` on a Aloha robot from [Trossen Robotics](https://www.trossenrobotics.com).
+
+## 4. Train a policy on your data
+
+### a. Use the `train` script
+
+To train a policy to control your robot, use the [`python lerobot/scripts/train.py`](../lerobot/scripts/train.py) script. A few arguments are required. Here is an example command:
+```bash
+python lerobot/scripts/train.py \
+  --dataset.repo_id=${HF_USER}/koch_test \
+  --policy.type=act \
+  --output_dir=outputs/train/act_koch_test \
+  --job_name=act_koch_test \
+  --policy.device=cuda \
+  --wandb.enable=true
+```
+
+Let's explain it:
+1. We provided the dataset as argument with `--dataset.repo_id=${HF_USER}/koch_test`.
+2. We provided the policy with `policy.type=act`. This loads configurations from [`configuration_act.py`](../lerobot/common/policies/act/configuration_act.py). Importantly, this policy will automatically adapt to the number of motor sates, motor actions and cameras of your robot (e.g. `laptop` and `phone`) which have been saved in your dataset.
+4. We provided `policy.device=cuda` since we are training on a Nvidia GPU, but you could use `policy.device=mps` to train on Apple silicon.
+5. We provided `wandb.enable=true` to use [Weights and Biases](https://docs.wandb.ai/quickstart) for visualizing training plots. This is optional but if you use it, make sure you are logged in by running `wandb login`.
+
+For more information on the `train` script see the previous tutorial: [`examples/4_train_policy_with_script.md`](../examples/4_train_policy_with_script.md)
+
+### b. (Optional) Upload policy checkpoints to the hub
+
+Once training is done, upload the latest checkpoint with:
+```bash
+huggingface-cli upload ${HF_USER}/act_koch_test \
+  outputs/train/act_koch_test/checkpoints/last/pretrained_model
+```
+
+You can also upload intermediate checkpoints with:
+```bash
+CKPT=010000
+huggingface-cli upload ${HF_USER}/act_koch_test_${CKPT} \
+  outputs/train/act_koch_test/checkpoints/${CKPT}/pretrained_model
+```
+
+## 5. Evaluate your policy
+
+Now that you have a policy checkpoint, you can easily control your robot with it using methods from [`ManipulatorRobot`](../lerobot/common/robot_devices/robots/manipulator.py) and the policy.
+
+Try this code for running inference for 60 seconds at 30 fps:
+```python
+from lerobot.common.policies.act.modeling_act import ACTPolicy
+
+inference_time_s = 60
+fps = 30
+device = "cuda"  # TODO: On Mac, use "mps" or "cpu"
+
+ckpt_path = "outputs/train/act_koch_test/checkpoints/last/pretrained_model"
+policy = ACTPolicy.from_pretrained(ckpt_path)
+policy.to(device)
+
+for _ in range(inference_time_s * fps):
+    start_time = time.perf_counter()
+
+    # Read the follower state and access the frames from the cameras
+    observation = robot.capture_observation()
+
+    # Convert to pytorch format: channel first and float32 in [0,1]
+    # with batch dimension
+    for name in observation:
+        if "image" in name:
+            observation[name] = observation[name].type(torch.float32) / 255
+            observation[name] = observation[name].permute(2, 0, 1).contiguous()
+        observation[name] = observation[name].unsqueeze(0)
+        observation[name] = observation[name].to(device)
+
+    # Compute the next action with the policy
+    # based on the current observation
+    action = policy.select_action(observation)
+    # Remove batch dimension
+    action = action.squeeze(0)
+    # Move to cpu, if not already the case
+    action = action.to("cpu")
+    # Order the robot to move
+    robot.send_action(action)
+
+    dt_s = time.perf_counter() - start_time
+    busy_wait(1 / fps - dt_s)
+```
+
+### a. Use our `record` function
+
+Ideally, when controlling your robot with your neural network, you would want to record evaluation episodes and to be able to visualize them later on, or even train on them like in Reinforcement Learning. This pretty much corresponds to recording a new dataset but with a neural network providing the actions instead of teleoperation.
+
+To this end, you can use the `record` function from [`lerobot/scripts/control_robot.py`](../lerobot/scripts/control_robot.py) but with a policy checkpoint as input. For instance, run this command to record 10 evaluation episodes:
+```bash
+python lerobot/scripts/control_robot.py \
+  --robot.type=koch \
+  --control.type=record \
+  --control.fps=30 \
+  --control.repo_id=${HF_USER}/eval_act_koch_test \
+  --control.tags='["tutorial"]' \
+  --control.warmup_time_s=5 \
+  --control.episode_time_s=30 \
+  --control.reset_time_s=30 \
+  --control.num_episodes=10 \
+  --control.push_to_hub=true \
+  --control.policy.path=outputs/train/act_koch_test/checkpoints/last/pretrained_model
+```
+
+As you can see, it's almost the same command as previously used to record your training dataset. Two things changed:
+1. There is an additional `--control.policy.path` argument which indicates the path to your policy checkpoint with  (e.g. `outputs/train/eval_koch_test/checkpoints/last/pretrained_model`). You can also use the model repository if you uploaded a model checkpoint to the hub (e.g. `${HF_USER}/act_koch_test`).
+2. The name of dataset begins by `eval` to reflect that you are running inference (e.g. `${HF_USER}/eval_act_koch_test`).
+
+### b. Visualize evaluation afterwards
+
+You can then visualize your evaluation dataset by running the same command as before but with the new inference dataset as argument:
+```bash
+python lerobot/scripts/visualize_dataset.py \
+  --repo-id ${HF_USER}/eval_act_koch_test
+```
+
+## 6. Next step
+
+Join our [Discord](https://discord.com/invite/s3KuuzsPFb) to collaborate on data collection and help us train a fully open-source foundational models for robotics!

examples/advanced/1_add_image_transforms.py

@@ -0,0 +1,67 @@
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""
+This script demonstrates how to use torchvision's image transformation with LeRobotDataset for data
+augmentation purposes. The transformations are passed to the dataset as an argument upon creation, and
+transforms are applied to the observation images before they are returned in the dataset's __getitem__.
+"""
+
+from pathlib import Path
+
+from torchvision.transforms import ToPILImage, v2
+
+from lerobot.common.datasets.lerobot_dataset import LeRobotDataset
+
+dataset_repo_id = "lerobot/aloha_static_screw_driver"
+
+# Create a LeRobotDataset with no transformations
+dataset = LeRobotDataset(dataset_repo_id, episodes=[0])
+# This is equivalent to `dataset = LeRobotDataset(dataset_repo_id, image_transforms=None)`
+
+# Get the index of the first observation in the first episode
+first_idx = dataset.episode_data_index["from"][0].item()
+
+# Get the frame corresponding to the first camera
+frame = dataset[first_idx][dataset.meta.camera_keys[0]]
+
+
+# Define the transformations
+transforms = v2.Compose(
+    [
+        v2.ColorJitter(brightness=(0.5, 1.5)),
+        v2.ColorJitter(contrast=(0.5, 1.5)),
+        v2.ColorJitter(hue=(-0.1, 0.1)),
+        v2.RandomAdjustSharpness(sharpness_factor=2, p=1),
+    ]
+)
+
+# Create another LeRobotDataset with the defined transformations
+transformed_dataset = LeRobotDataset(dataset_repo_id, episodes=[0], image_transforms=transforms)
+
+# Get a frame from the transformed dataset
+transformed_frame = transformed_dataset[first_idx][transformed_dataset.meta.camera_keys[0]]
+
+# Create a directory to store output images
+output_dir = Path("outputs/image_transforms")
+output_dir.mkdir(parents=True, exist_ok=True)
+
+# Save the original frame
+to_pil = ToPILImage()
+to_pil(frame).save(output_dir / "original_frame.png", quality=100)
+print(f"Original frame saved to {output_dir / 'original_frame.png'}.")
+
+# Save the transformed frame
+to_pil(transformed_frame).save(output_dir / "transformed_frame.png", quality=100)
+print(f"Transformed frame saved to {output_dir / 'transformed_frame.png'}.")

examples/advanced/2_calculate_validation_loss.py

@@ -0,0 +1,104 @@
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""This script demonstrates how to slice a dataset and calculate the loss on a subset of the data.
+
+This technique can be useful for debugging and testing purposes, as well as identifying whether a policy
+is learning effectively.
+
+Furthermore, relying on validation loss to evaluate performance is generally not considered a good practice,
+especially in the context of imitation learning. The most reliable approach is to evaluate the policy directly
+on the target environment, whether that be in simulation or the real world.
+"""
+
+import math
+
+import torch
+
+from lerobot.common.datasets.lerobot_dataset import LeRobotDataset, LeRobotDatasetMetadata
+from lerobot.common.policies.diffusion.modeling_diffusion import DiffusionPolicy
+
+
+def main():
+    device = torch.device("cuda")
+
+    # Download the diffusion policy for pusht environment
+    pretrained_policy_path = "lerobot/diffusion_pusht"
+    # OR uncomment the following to evaluate a policy from the local outputs/train folder.
+    # pretrained_policy_path = Path("outputs/train/example_pusht_diffusion")
+
+    policy = DiffusionPolicy.from_pretrained(pretrained_policy_path)
+    policy.eval()
+    policy.to(device)
+
+    # Set up the dataset.
+    delta_timestamps = {
+        # Load the previous image and state at -0.1 seconds before current frame,
+        # then load current image and state corresponding to 0.0 second.
+        "observation.image": [-0.1, 0.0],
+        "observation.state": [-0.1, 0.0],
+        # Load the previous action (-0.1), the next action to be executed (0.0),
+        # and 14 future actions with a 0.1 seconds spacing. All these actions will be
+        # used to calculate the loss.
+        "action": [-0.1, 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4],
+    }
+
+    # Load the last 10% of episodes of the dataset as a validation set.
+    # - Load dataset metadata
+    dataset_metadata = LeRobotDatasetMetadata("lerobot/pusht")
+    # - Calculate train and val episodes
+    total_episodes = dataset_metadata.total_episodes
+    episodes = list(range(dataset_metadata.total_episodes))
+    num_train_episodes = math.floor(total_episodes * 90 / 100)
+    train_episodes = episodes[:num_train_episodes]
+    val_episodes = episodes[num_train_episodes:]
+    print(f"Number of episodes in full dataset: {total_episodes}")
+    print(f"Number of episodes in training dataset (90% subset): {len(train_episodes)}")
+    print(f"Number of episodes in validation dataset (10% subset): {len(val_episodes)}")
+    # - Load train and val datasets
+    train_dataset = LeRobotDataset(
+        "lerobot/pusht", episodes=train_episodes, delta_timestamps=delta_timestamps
+    )
+    val_dataset = LeRobotDataset("lerobot/pusht", episodes=val_episodes, delta_timestamps=delta_timestamps)
+    print(f"Number of frames in training dataset (90% subset): {len(train_dataset)}")
+    print(f"Number of frames in validation dataset (10% subset): {len(val_dataset)}")
+
+    # Create dataloader for evaluation.
+    val_dataloader = torch.utils.data.DataLoader(
+        val_dataset,
+        num_workers=4,
+        batch_size=64,
+        shuffle=False,
+        pin_memory=device != torch.device("cpu"),
+        drop_last=False,
+    )
+
+    # Run validation loop.
+    loss_cumsum = 0
+    n_examples_evaluated = 0
+    for batch in val_dataloader:
+        batch = {k: v.to(device, non_blocking=True) for k, v in batch.items()}
+        loss, _ = policy.forward(batch)
+
+        loss_cumsum += loss.item()
+        n_examples_evaluated += batch["index"].shape[0]
+
+    # Calculate the average loss over the validation set.
+    average_loss = loss_cumsum / n_examples_evaluated
+
+    print(f"Average loss on validation set: {average_loss:.4f}")
+
+
+if __name__ == "__main__":
+    main()

examples/lekiwi/evaluate.py

@@ -1,101 +0,0 @@
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.datasets.utils import hw_to_dataset_features
-from lerobot.policies.act.modeling_act import ACTPolicy
-from lerobot.policies.factory import make_pre_post_processors
-from lerobot.record import record_loop
-from lerobot.robots.lekiwi import LeKiwiClient, LeKiwiClientConfig
-from lerobot.utils.control_utils import init_keyboard_listener
-from lerobot.utils.utils import log_say
-from lerobot.utils.visualization_utils import _init_rerun
-
-NUM_EPISODES = 2
-FPS = 30
-EPISODE_TIME_SEC = 60
-TASK_DESCRIPTION = "My task description"
-HF_MODEL_ID = "<hf_username>/<model_repo_id>"
-HF_DATASET_ID = "<hf_username>/<eval_dataset_repo_id>"
-
-# Create the robot and teleoperator configurations
-robot_config = LeKiwiClientConfig(remote_ip="172.18.134.136", id="lekiwi")
-robot = LeKiwiClient(robot_config)
-
-policy = ACTPolicy.from_pretrained(HF_MODEL_ID)
-
-# Configure the dataset features
-action_features = hw_to_dataset_features(robot.action_features, "action")
-obs_features = hw_to_dataset_features(robot.observation_features, "observation")
-dataset_features = {**action_features, **obs_features}
-
-# Create the dataset
-dataset = LeRobotDataset.create(
-    repo_id=HF_DATASET_ID,
-    fps=FPS,
-    features=dataset_features,
-    robot_type=robot.name,
-    use_videos=True,
-    image_writer_threads=4,
-)
-
-# To connect you already should have this script running on LeKiwi: `python -m lerobot.robots.lekiwi.lekiwi_host --robot.id=my_awesome_kiwi`
-robot.connect()
-
-_init_rerun(session_name="recording")
-
-listener, events = init_keyboard_listener()
-
-if not robot.is_connected:
-    raise ValueError("Robot is not connected!")
-
-preprocessor, postprocessor = make_pre_post_processors(
-    policy_cfg=policy,
-    pretrained_path=HF_MODEL_ID,
-    dataset_stats=dataset.meta.stats,
-)
-
-recorded_episodes = 0
-while recorded_episodes < NUM_EPISODES and not events["stop_recording"]:
-    log_say(f"Running inference, recording eval episode {recorded_episodes} of {NUM_EPISODES}")
-
-    # Run the policy inference loop
-    record_loop(
-        robot=robot,
-        events=events,
-        fps=FPS,
-        policy=policy,
-        preprocessor=preprocessor,
-        postprocessor=postprocessor,
-        dataset=dataset,
-        control_time_s=EPISODE_TIME_SEC,
-        single_task=TASK_DESCRIPTION,
-        display_data=True,
-    )
-
-    # Logic for reset env
-    if not events["stop_recording"] and (
-        (recorded_episodes < NUM_EPISODES - 1) or events["rerecord_episode"]
-    ):
-        log_say("Reset the environment")
-        record_loop(
-            robot=robot,
-            events=events,
-            fps=FPS,
-            control_time_s=EPISODE_TIME_SEC,
-            single_task=TASK_DESCRIPTION,
-            display_data=True,
-        )
-
-    if events["rerecord_episode"]:
-        log_say("Re-record episode")
-        events["rerecord_episode"] = False
-        events["exit_early"] = False
-        dataset.clear_episode_buffer()
-        continue
-
-    dataset.save_episode()
-    recorded_episodes += 1
-
-# Upload to hub and clean up
-dataset.push_to_hub()
-
-robot.disconnect()
-listener.stop()

examples/lekiwi/record.py

@@ -1,101 +0,0 @@
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.datasets.utils import hw_to_dataset_features
-from lerobot.record import record_loop
-from lerobot.robots.lekiwi.config_lekiwi import LeKiwiClientConfig
-from lerobot.robots.lekiwi.lekiwi_client import LeKiwiClient
-from lerobot.teleoperators.keyboard import KeyboardTeleop, KeyboardTeleopConfig
-from lerobot.teleoperators.so100_leader import SO100Leader, SO100LeaderConfig
-from lerobot.utils.control_utils import init_keyboard_listener
-from lerobot.utils.utils import log_say
-from lerobot.utils.visualization_utils import _init_rerun
-
-NUM_EPISODES = 3
-FPS = 30
-EPISODE_TIME_SEC = 30
-RESET_TIME_SEC = 10
-TASK_DESCRIPTION = "My task description"
-
-# Create the robot and teleoperator configurations
-robot_config = LeKiwiClientConfig(remote_ip="172.18.134.136", id="lekiwi")
-leader_arm_config = SO100LeaderConfig(port="/dev/tty.usbmodem585A0077581", id="my_awesome_leader_arm")
-keyboard_config = KeyboardTeleopConfig()
-
-robot = LeKiwiClient(robot_config)
-leader_arm = SO100Leader(leader_arm_config)
-keyboard = KeyboardTeleop(keyboard_config)
-
-# Configure the dataset features
-action_features = hw_to_dataset_features(robot.action_features, "action")
-obs_features = hw_to_dataset_features(robot.observation_features, "observation")
-dataset_features = {**action_features, **obs_features}
-
-# Create the dataset
-dataset = LeRobotDataset.create(
-    repo_id="<hf_username>/<dataset_repo_id>",
-    fps=FPS,
-    features=dataset_features,
-    robot_type=robot.name,
-    use_videos=True,
-    image_writer_threads=4,
-)
-
-# To connect you already should have this script running on LeKiwi: `python -m lerobot.robots.lekiwi.lekiwi_host --robot.id=my_awesome_kiwi`
-robot.connect()
-leader_arm.connect()
-keyboard.connect()
-
-_init_rerun(session_name="lekiwi_record")
-
-listener, events = init_keyboard_listener()
-
-if not robot.is_connected or not leader_arm.is_connected or not keyboard.is_connected:
-    raise ValueError("Robot, leader arm of keyboard is not connected!")
-
-recorded_episodes = 0
-while recorded_episodes < NUM_EPISODES and not events["stop_recording"]:
-    log_say(f"Recording episode {recorded_episodes}")
-
-    # Run the record loop
-    record_loop(
-        robot=robot,
-        events=events,
-        fps=FPS,
-        dataset=dataset,
-        teleop=[leader_arm, keyboard],
-        control_time_s=EPISODE_TIME_SEC,
-        single_task=TASK_DESCRIPTION,
-        display_data=True,
-    )
-
-    # Logic for reset env
-    if not events["stop_recording"] and (
-        (recorded_episodes < NUM_EPISODES - 1) or events["rerecord_episode"]
-    ):
-        log_say("Reset the environment")
-        record_loop(
-            robot=robot,
-            events=events,
-            fps=FPS,
-            teleop=[leader_arm, keyboard],
-            control_time_s=RESET_TIME_SEC,
-            single_task=TASK_DESCRIPTION,
-            display_data=True,
-        )
-
-    if events["rerecord_episode"]:
-        log_say("Re-record episode")
-        events["rerecord_episode"] = False
-        events["exit_early"] = False
-        dataset.clear_episode_buffer()
-        continue
-
-    dataset.save_episode()
-    recorded_episodes += 1
-
-# Upload to hub and clean up
-dataset.push_to_hub()
-
-robot.disconnect()
-leader_arm.disconnect()
-keyboard.disconnect()
-listener.stop()

examples/lekiwi/replay.py

@@ -1,33 +0,0 @@
-import time
-
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.robots.lekiwi.config_lekiwi import LeKiwiClientConfig
-from lerobot.robots.lekiwi.lekiwi_client import LeKiwiClient
-from lerobot.utils.robot_utils import busy_wait
-from lerobot.utils.utils import log_say
-
-EPISODE_IDX = 0
-
-robot_config = LeKiwiClientConfig(remote_ip="172.18.134.136", id="lekiwi")
-robot = LeKiwiClient(robot_config)
-
-dataset = LeRobotDataset("<hf_username>/<dataset_repo_id>", episodes=[EPISODE_IDX])
-actions = dataset.hf_dataset.select_columns("action")
-
-robot.connect()
-
-if not robot.is_connected:
-    raise ValueError("Robot is not connected!")
-
-log_say(f"Replaying episode {EPISODE_IDX}")
-for idx in range(dataset.num_frames):
-    t0 = time.perf_counter()
-
-    action = {
-        name: float(actions[idx]["action"][i]) for i, name in enumerate(dataset.features["action"]["names"])
-    }
-    robot.send_action(action)
-
-    busy_wait(max(1.0 / dataset.fps - (time.perf_counter() - t0), 0.0))
-
-robot.disconnect()

examples/lekiwi/teleoperate.py

@@ -1,47 +0,0 @@
-import time
-
-from lerobot.robots.lekiwi import LeKiwiClient, LeKiwiClientConfig
-from lerobot.teleoperators.keyboard.teleop_keyboard import KeyboardTeleop, KeyboardTeleopConfig
-from lerobot.teleoperators.so100_leader import SO100Leader, SO100LeaderConfig
-from lerobot.utils.robot_utils import busy_wait
-from lerobot.utils.visualization_utils import _init_rerun, log_rerun_data
-
-FPS = 30
-
-# Create the robot and teleoperator configurations
-robot_config = LeKiwiClientConfig(remote_ip="172.18.134.136", id="my_lekiwi")
-teleop_arm_config = SO100LeaderConfig(port="/dev/tty.usbmodem585A0077581", id="my_awesome_leader_arm")
-keyboard_config = KeyboardTeleopConfig(id="my_laptop_keyboard")
-
-robot = LeKiwiClient(robot_config)
-leader_arm = SO100Leader(teleop_arm_config)
-keyboard = KeyboardTeleop(keyboard_config)
-
-# To connect you already should have this script running on LeKiwi: `python -m lerobot.robots.lekiwi.lekiwi_host --robot.id=my_awesome_kiwi`
-robot.connect()
-leader_arm.connect()
-keyboard.connect()
-
-_init_rerun(session_name="lekiwi_teleop")
-
-if not robot.is_connected or not leader_arm.is_connected or not keyboard.is_connected:
-    raise ValueError("Robot, leader arm of keyboard is not connected!")
-
-while True:
-    t0 = time.perf_counter()
-
-    observation = robot.get_observation()
-
-    arm_action = leader_arm.get_action()
-    arm_action = {f"arm_{k}": v for k, v in arm_action.items()}
-
-    keyboard_keys = keyboard.get_action()
-    base_action = robot._from_keyboard_to_base_action(keyboard_keys)
-
-    log_rerun_data(observation=observation, action={**arm_action, **base_action})
-
-    action = {**arm_action, **base_action} if len(base_action) > 0 else arm_action
-
-    robot.send_action(action)
-
-    busy_wait(max(1.0 / FPS - (time.perf_counter() - t0), 0.0))

examples/phone_to_so100/evaluate.py

@@ -1,158 +0,0 @@
-# !/usr/bin/env python
-
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.datasets.pipeline_features import aggregate_pipeline_dataset_features
-from lerobot.datasets.utils import merge_features
-from lerobot.model.kinematics import RobotKinematics
-from lerobot.policies.act.modeling_act import ACTPolicy
-from lerobot.policies.factory import make_pre_post_processors
-from lerobot.processor.converters import (
-    to_output_robot_action,
-    to_transition_robot_observation,
-)
-from lerobot.processor.pipeline import RobotProcessor
-from lerobot.record import record_loop
-from lerobot.robots.so100_follower.config_so100_follower import SO100FollowerConfig
-from lerobot.robots.so100_follower.robot_kinematic_processor import (
-    AddRobotObservationAsComplimentaryData,
-    ForwardKinematicsJointsToEE,
-    InverseKinematicsEEToJoints,
-)
-from lerobot.robots.so100_follower.so100_follower import SO100Follower
-from lerobot.utils.control_utils import init_keyboard_listener
-from lerobot.utils.utils import log_say
-from lerobot.utils.visualization_utils import _init_rerun
-
-NUM_EPISODES = 5
-FPS = 30
-EPISODE_TIME_SEC = 60
-TASK_DESCRIPTION = "My task description"
-HF_MODEL_ID = "<hf_username>/<model_repo_id>"
-HF_DATASET_ID = "<hf_username>/<dataset_repo_id>"
-
-# Initialize the robot with degrees
-camera_config = {"front": OpenCVCameraConfig(index_or_path=0, width=640, height=480, fps=FPS)}
-robot_config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem58760434471",
-    id="my_awesome_follower_arm",
-    cameras=camera_config,
-    use_degrees=True,
-)
-
-# Initialize the robot
-robot = SO100Follower(robot_config)
-
-# NOTE: It is highly recommended to use the urdf in the SO-ARM100 repo: https://github.com/TheRobotStudio/SO-ARM100/blob/main/Simulation/SO101/so101_new_calib.urdf
-kinematics_solver = RobotKinematics(
-    urdf_path="./src/lerobot/teleoperators/sim/so101_new_calib.urdf",
-    target_frame_name="gripper_frame_link",
-    joint_names=list(robot.bus.motors.keys()),
-)
-
-# Build pipeline to convert ee pose action to joint action
-robot_ee_to_joints = RobotProcessor(
-    steps=[
-        AddRobotObservationAsComplimentaryData(robot=robot),
-        InverseKinematicsEEToJoints(
-            kinematics=kinematics_solver,
-            motor_names=list(robot.bus.motors.keys()),
-            initial_guess_current_joints=True,
-        ),
-    ],
-    to_transition=lambda tr: tr,
-    to_output=to_output_robot_action,
-)
-
-# Build pipeline to convert joint observation to ee pose observation
-robot_joints_to_ee_pose = RobotProcessor(
-    steps=[
-        ForwardKinematicsJointsToEE(kinematics=kinematics_solver, motor_names=list(robot.bus.motors.keys()))
-    ],
-    to_transition=to_transition_robot_observation,
-    to_output=lambda tr: tr,
-)
-
-# Build dataset action and gripper features
-action_ee_and_gripper = aggregate_pipeline_dataset_features(
-    pipeline=robot_ee_to_joints,
-    initial_features={},
-    use_videos=True,
-    patterns=["action.ee", "action.gripper.pos", "observation.state.gripper.pos"],
-)  # Get all ee action features + gripper pos action features
-
-# Build dataset observation features
-obs_ee = aggregate_pipeline_dataset_features(
-    pipeline=robot_joints_to_ee_pose,
-    initial_features=robot.observation_features,
-    use_videos=True,
-    patterns=["observation.state.ee"],
-)  # Get all ee observation features
-
-dataset_features = merge_features(obs_ee, action_ee_and_gripper)
-
-print("All dataset features: ", dataset_features)
-
-# Create the dataset
-dataset = LeRobotDataset.create(
-    repo_id=HF_DATASET_ID,
-    fps=FPS,
-    features=dataset_features,
-    robot_type=robot.name,
-    use_videos=True,
-    image_writer_threads=4,
-)
-
-# Initialize the keyboard listener and rerun visualization
-_, events = init_keyboard_listener()
-_init_rerun(session_name="recording_phone")
-
-# Connect the robot and teleoperator
-robot.connect()
-
-episode_idx = 0
-
-policy = ACTPolicy.from_pretrained(HF_MODEL_ID)
-preprocessor, postprocessor = make_pre_post_processors(
-    policy_cfg=policy,
-    pretrained_path=HF_MODEL_ID,
-    dataset_stats=dataset.meta.stats,
-)
-
-for episode_idx in range(NUM_EPISODES):
-    log_say(f"Running inference, recording eval episode {episode_idx + 1} of {NUM_EPISODES}")
-
-    record_loop(
-        robot=robot,
-        events=events,
-        fps=FPS,
-        policy=policy,
-        preprocessor=preprocessor,
-        postprocessor=postprocessor,
-        dataset=dataset,
-        control_time_s=EPISODE_TIME_SEC,
-        single_task=TASK_DESCRIPTION,
-        display_data=True,
-        robot_action_processor=robot_ee_to_joints,
-        robot_observation_processor=robot_joints_to_ee_pose,
-    )
-    dataset.save_episode()
-
-# Clean up
-log_say("Stop recording")
-robot.disconnect()
-dataset.push_to_hub()

examples/phone_to_so100/record.py

@@ -1,215 +0,0 @@
-# !/usr/bin/env python
-
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.datasets.pipeline_features import aggregate_pipeline_dataset_features
-from lerobot.datasets.utils import merge_features
-from lerobot.model.kinematics import RobotKinematics
-from lerobot.processor.converters import (
-    to_output_robot_action,
-    to_transition_robot_observation,
-    to_transition_teleop_action,
-)
-from lerobot.processor.pipeline import RobotProcessor
-from lerobot.record import record_loop
-from lerobot.robots.so100_follower.config_so100_follower import SO100FollowerConfig
-from lerobot.robots.so100_follower.robot_kinematic_processor import (
-    AddRobotObservationAsComplimentaryData,
-    EEBoundsAndSafety,
-    EEReferenceAndDelta,
-    ForwardKinematicsJointsToEE,
-    GripperVelocityToJoint,
-    InverseKinematicsEEToJoints,
-)
-from lerobot.robots.so100_follower.so100_follower import SO100Follower
-from lerobot.teleoperators.phone.config_phone import PhoneConfig, PhoneOS
-from lerobot.teleoperators.phone.phone_processor import MapPhoneActionToRobotAction
-from lerobot.teleoperators.phone.teleop_phone import Phone
-from lerobot.utils.control_utils import init_keyboard_listener
-from lerobot.utils.utils import log_say
-from lerobot.utils.visualization_utils import _init_rerun
-
-NUM_EPISODES = 10
-FPS = 30
-EPISODE_TIME_SEC = 60
-RESET_TIME_SEC = 30
-TASK_DESCRIPTION = "My task description"
-HF_REPO_ID = "<hf_username>/<dataset_repo_id>"
-
-# Initialize the robot and teleoperator
-camera_config = {"front": OpenCVCameraConfig(index_or_path=0, width=640, height=480, fps=FPS)}
-robot_config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem58760434471",
-    id="my_awesome_follower_arm",
-    cameras=camera_config,
-    use_degrees=True,
-)
-teleop_config = PhoneConfig(phone_os=PhoneOS.IOS)  # or PhoneOS.ANDROID
-
-# Initialize the robot and teleoperator
-robot = SO100Follower(robot_config)
-phone = Phone(teleop_config)
-
-# NOTE: It is highly recommended to use the urdf in the SO-ARM100 repo: https://github.com/TheRobotStudio/SO-ARM100/blob/main/Simulation/SO101/so101_new_calib.urdf
-kinematics_solver = RobotKinematics(
-    urdf_path="./src/lerobot/teleoperators/sim/so101_new_calib.urdf",
-    target_frame_name="gripper_frame_link",
-    joint_names=list(robot.bus.motors.keys()),
-)
-
-# Build pipeline to convert phone action to ee pose action
-phone_to_robot_ee_pose = RobotProcessor(
-    steps=[
-        MapPhoneActionToRobotAction(platform=teleop_config.phone_os),
-        AddRobotObservationAsComplimentaryData(robot=robot),
-        EEReferenceAndDelta(
-            kinematics=kinematics_solver,
-            end_effector_step_sizes={"x": 0.5, "y": 0.5, "z": 0.5},
-            motor_names=list(robot.bus.motors.keys()),
-        ),
-        EEBoundsAndSafety(
-            end_effector_bounds={"min": [-1.0, -1.0, -1.0], "max": [1.0, 1.0, 1.0]},
-            max_ee_step_m=0.20,
-            max_ee_twist_step_rad=0.50,
-        ),
-    ],
-    to_transition=to_transition_teleop_action,
-    to_output=lambda tr: tr,
-)
-
-# Build pipeline to convert ee pose action to joint action
-robot_ee_to_joints = RobotProcessor(
-    steps=[
-        InverseKinematicsEEToJoints(
-            kinematics=kinematics_solver,
-            motor_names=list(robot.bus.motors.keys()),
-            initial_guess_current_joints=True,
-        ),
-        GripperVelocityToJoint(
-            motor_names=list(robot.bus.motors.keys()),
-            speed_factor=20.0,
-        ),
-    ],
-    to_transition=lambda tr: tr,
-    to_output=to_output_robot_action,
-)
-
-# Build pipeline to convert joint observation to ee pose observation
-robot_joints_to_ee_pose = RobotProcessor(
-    steps=[
-        ForwardKinematicsJointsToEE(kinematics=kinematics_solver, motor_names=list(robot.bus.motors.keys()))
-    ],
-    to_transition=to_transition_robot_observation,
-    to_output=lambda tr: tr,
-)
-
-# Build dataset ee action features
-action_ee = aggregate_pipeline_dataset_features(
-    pipeline=phone_to_robot_ee_pose,
-    initial_features=phone.action_features,
-    use_videos=True,
-    patterns=["action.ee"],
-)
-
-# Get gripper pos action features
-gripper = aggregate_pipeline_dataset_features(
-    pipeline=robot_ee_to_joints,
-    initial_features={},
-    use_videos=True,
-    patterns=["action.gripper.pos", "observation.state.gripper.pos"],
-)
-
-# Build dataset ee observation features
-observation_ee = aggregate_pipeline_dataset_features(
-    pipeline=robot_joints_to_ee_pose,
-    initial_features=robot.observation_features,
-    use_videos=True,
-    patterns=["observation.state.ee"],
-)
-
-dataset_features = merge_features(action_ee, gripper, observation_ee)
-
-print("All dataset features: ", dataset_features)
-
-# Create the dataset
-dataset = LeRobotDataset.create(
-    repo_id=HF_REPO_ID,
-    fps=FPS,
-    features=dataset_features,
-    robot_type=robot.name,
-    use_videos=True,
-    image_writer_threads=4,
-)
-
-# Initialize the keyboard listener and rerun visualization
-_, events = init_keyboard_listener()
-_init_rerun(session_name="recording_phone")
-
-# Connect the robot and teleoperator
-robot.connect()
-phone.connect()
-
-episode_idx = 0
-while episode_idx < NUM_EPISODES and not events["stop_recording"]:
-    log_say(f"Recording episode {episode_idx + 1} of {NUM_EPISODES}")
-
-    record_loop(
-        robot=robot,
-        events=events,
-        fps=FPS,
-        teleop=phone,
-        dataset=dataset,
-        control_time_s=EPISODE_TIME_SEC,
-        single_task=TASK_DESCRIPTION,
-        display_data=True,
-        teleop_action_processor=phone_to_robot_ee_pose,
-        robot_action_processor=robot_ee_to_joints,
-        robot_observation_processor=robot_joints_to_ee_pose,
-    )
-
-    # Reset the environment if not stopping or re-recording
-    if not events["stop_recording"] and (episode_idx < NUM_EPISODES - 1 or events["rerecord_episode"]):
-        log_say("Reset the environment")
-        record_loop(
-            robot=robot,
-            events=events,
-            fps=FPS,
-            teleop=phone,
-            control_time_s=RESET_TIME_SEC,
-            single_task=TASK_DESCRIPTION,
-            display_data=True,
-            teleop_action_processor=phone_to_robot_ee_pose,
-            robot_action_processor=robot_ee_to_joints,
-            robot_observation_processor=robot_joints_to_ee_pose,
-        )
-
-    if events["rerecord_episode"]:
-        log_say("Re-recording episode")
-        events["rerecord_episode"] = False
-        events["exit_early"] = False
-        dataset.clear_episode_buffer()
-        continue
-
-    dataset.save_episode()
-    episode_idx += 1
-
-# Clean up
-log_say("Stop recording")
-robot.disconnect()
-phone.disconnect()
-dataset.push_to_hub()

examples/phone_to_so100/replay.py

@@ -1,81 +0,0 @@
-# !/usr/bin/env python
-
-# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-import time
-
-from lerobot.datasets.lerobot_dataset import LeRobotDataset
-from lerobot.model.kinematics import RobotKinematics
-from lerobot.processor.converters import to_output_robot_action, to_transition_teleop_action
-from lerobot.processor.pipeline import RobotProcessor
-from lerobot.robots.so100_follower.config_so100_follower import SO100FollowerConfig
-from lerobot.robots.so100_follower.robot_kinematic_processor import (
-    AddRobotObservationAsComplimentaryData,
-    InverseKinematicsEEToJoints,
-)
-from lerobot.robots.so100_follower.so100_follower import SO100Follower
-from lerobot.utils.robot_utils import busy_wait
-from lerobot.utils.utils import log_say
-
-EPISODE_IDX = 0
-HF_REPO_ID = "<hf_username>/<dataset_repo_id>"
-
-robot_config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem58760434471", id="my_awesome_follower_arm", use_degrees=True
-)
-robot = SO100Follower(robot_config)
-robot.connect()
-
-dataset = LeRobotDataset(HF_REPO_ID, episodes=[EPISODE_IDX])
-actions = dataset.hf_dataset.select_columns("action")
-
-# NOTE: It is highly recommended to use the urdf in the SO-ARM100 repo: https://github.com/TheRobotStudio/SO-ARM100/blob/main/Simulation/SO101/so101_new_calib.urdf
-kinematics_solver = RobotKinematics(
-    urdf_path="./src/lerobot/teleoperators/sim/so101_new_calib.urdf",
-    target_frame_name="gripper_frame_link",
-    joint_names=list(robot.bus.motors.keys()),
-)
-
-# Build pipeline to convert ee pose action to joint action
-robot_ee_to_joints = RobotProcessor(
-    steps=[
-        AddRobotObservationAsComplimentaryData(robot=robot),
-        InverseKinematicsEEToJoints(
-            kinematics=kinematics_solver,
-            motor_names=list(robot.bus.motors.keys()),
-            initial_guess_current_joints=False,  # Because replay is open loop
-        ),
-    ],
-    to_transition=to_transition_teleop_action,
-    to_output=to_output_robot_action,
-)
-
-robot_ee_to_joints.reset()
-
-log_say(f"Replaying episode {EPISODE_IDX}")
-for idx in range(dataset.num_frames):
-    t0 = time.perf_counter()
-
-    ee_action = {
-        name: float(actions[idx]["action"][i]) for i, name in enumerate(dataset.features["action"]["names"])
-    }
-
-    joint_action = robot_ee_to_joints(ee_action)
-    action_sent = robot.send_action(joint_action)
-
-    busy_wait(1.0 / dataset.fps - (time.perf_counter() - t0))
-
-robot.disconnect()

examples/phone_to_so100/teleoperate.py

@@ -1,93 +0,0 @@
-#!/usr/bin/env python
-
-# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specif
-
-import time
-
-from lerobot.model.kinematics import RobotKinematics
-from lerobot.processor import RobotProcessor
-from lerobot.processor.converters import to_output_robot_action, to_transition_teleop_action
-from lerobot.robots.so100_follower.config_so100_follower import SO100FollowerConfig
-from lerobot.robots.so100_follower.robot_kinematic_processor import (
-    AddRobotObservationAsComplimentaryData,
-    EEBoundsAndSafety,
-    EEReferenceAndDelta,
-    GripperVelocityToJoint,
-    InverseKinematicsEEToJoints,
-)
-from lerobot.robots.so100_follower.so100_follower import SO100Follower
-from lerobot.teleoperators.phone.config_phone import PhoneConfig, PhoneOS
-from lerobot.teleoperators.phone.phone_processor import MapPhoneActionToRobotAction
-from lerobot.teleoperators.phone.teleop_phone import Phone
-
-# Initialize the robot and teleoperator
-robot_config = SO100FollowerConfig(
-    port="/dev/tty.usbmodem58760434471", id="my_awesome_follower_arm", use_degrees=True
-)
-teleop_config = PhoneConfig(phone_os=PhoneOS.IOS)  # or PhoneOS.ANDROID
-
-# Initialize the robot and teleoperator
-robot = SO100Follower(robot_config)
-teleop_device = Phone(teleop_config)
-
-# NOTE: It is highly recommended to use the urdf in the SO-ARM100 repo: https://github.com/TheRobotStudio/SO-ARM100/blob/main/Simulation/SO101/so101_new_calib.urdf
-kinematics_solver = RobotKinematics(
-    urdf_path="./src/lerobot/teleoperators/sim/so101_new_calib.urdf",
-    target_frame_name="gripper_frame_link",
-    joint_names=list(robot.bus.motors.keys()),
-)
-
-# Build pipeline to convert phone action to ee pose action to joint action
-phone_to_robot_joints = RobotProcessor(
-    steps=[
-        MapPhoneActionToRobotAction(platform=teleop_config.phone_os),
-        AddRobotObservationAsComplimentaryData(robot=robot),
-        EEReferenceAndDelta(
-            kinematics=kinematics_solver,
-            end_effector_step_sizes={"x": 0.5, "y": 0.5, "z": 0.5},
-            motor_names=list(robot.bus.motors.keys()),
-        ),
-        EEBoundsAndSafety(
-            end_effector_bounds={"min": [-1.0, -1.0, -1.0], "max": [1.0, 1.0, 1.0]},
-            max_ee_step_m=0.10,
-            max_ee_twist_step_rad=0.50,
-        ),
-        InverseKinematicsEEToJoints(
-            kinematics=kinematics_solver,
-            motor_names=list(robot.bus.motors.keys()),
-        ),
-        GripperVelocityToJoint(
-            motor_names=list(robot.bus.motors.keys()),
-            speed_factor=20.0,
-        ),
-    ],
-    to_transition=to_transition_teleop_action,
-    to_output=to_output_robot_action,
-)
-
-robot.connect()
-teleop_device.connect()
-
-print("Starting teleop loop. Move your phone to teleoperate the robot.")
-while True:
-    # Get teleop observation
-    phone_obs = teleop_device.get_action()
-
-    # Phone -> EE pose -> Joints transition
-    joint_action = phone_to_robot_joints(phone_obs)
-
-    if joint_action:
-        robot.send_action(joint_action)
-
-    time.sleep(0.01)

examples/robots/lekiwi_client_app.py

@@ -0,0 +1,98 @@
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import logging
+import time
+
+from lerobot.common.datasets.lerobot_dataset import LeRobotDataset
+from lerobot.common.robots.lekiwi.config_lekiwi import LeKiwiClientConfig
+from lerobot.common.robots.lekiwi.lekiwi_client import OBS_STATE, LeKiwiClient
+from lerobot.common.teleoperators.keyboard import KeyboardTeleop, KeyboardTeleopConfig
+from lerobot.common.teleoperators.so100 import SO100Leader, SO100LeaderConfig
+
+NB_CYCLES_CLIENT_CONNECTION = 250
+
+
+def main():
+    logging.info("Configuring Teleop Devices")
+    leader_arm_config = SO100LeaderConfig(port="/dev/tty.usbmodem58760434171")
+    leader_arm = SO100Leader(leader_arm_config)
+
+    keyboard_config = KeyboardTeleopConfig()
+    keyboard = KeyboardTeleop(keyboard_config)
+
+    logging.info("Configuring LeKiwi Client")
+    robot_config = LeKiwiClientConfig(remote_ip="192.0.2.42", id="lekiwi")
+    robot = LeKiwiClient(robot_config)
+
+    logging.info("Creating LeRobot Dataset")
+
+    # The observations that we get are expected to be in body frame (x,y,theta)
+    obs_dict = {f"{OBS_STATE}." + key: value for key, value in robot.state_feature.items()}
+    # The actions that we send are expected to be in wheel frame (motor encoders)
+    act_dict = {"action." + key: value for key, value in robot.action_feature.items()}
+
+    features_dict = {
+        **act_dict,
+        **obs_dict,
+        **robot.camera_features,
+    }
+    dataset = LeRobotDataset.create(
+        repo_id="user/lekiwi" + str(int(time.time())),
+        fps=10,
+        features=features_dict,
+    )
+
+    logging.info("Connecting Teleop Devices")
+    leader_arm.connect()
+    keyboard.connect()
+
+    logging.info("Connecting remote LeKiwi")
+    robot.connect()
+
+    if not robot.is_connected or not leader_arm.is_connected or not keyboard.is_connected:
+        logging.error("Failed to connect to all devices")
+        return
+
+    logging.info("Starting LeKiwi teleoperation")
+    i = 0
+    while i < NB_CYCLES_CLIENT_CONNECTION:
+        arm_action = leader_arm.get_action()
+        base_action = keyboard.get_action()
+        action = {**arm_action, **base_action} if len(base_action) > 0 else arm_action
+
+        action_sent = robot.send_action(action)
+        observation = robot.get_observation()
+
+        frame = {**action_sent, **observation}
+        frame.update({"task": "Dummy Example Task Dataset"})
+
+        logging.info("Saved a frame into the dataset")
+        dataset.add_frame(frame)
+        i += 1
+
+    logging.info("Disconnecting Teleop Devices and LeKiwi Client")
+    robot.disconnect()
+    leader_arm.disconnect()
+    keyboard.disconnect()
+
+    logging.info("Uploading dataset to the hub")
+    dataset.save_episode()
+    dataset.push_to_hub()
+
+    logging.info("Finished LeKiwi cleanly")
+
+
+if __name__ == "__main__":
+    main()

lerobot/__init__.py

@@ -167,10 +167,15 @@ available_datasets = sorted(
     set(itertools.chain(*available_datasets_per_env.values(), available_real_world_datasets))
 )
 
-# lists all available policies from `lerobot/policies`
-available_policies = ["act", "diffusion", "tdmpc", "vqbet"]
+# lists all available policies from `lerobot/common/policies`
+available_policies = [
+    "act",
+    "diffusion",
+    "tdmpc",
+    "vqbet",
+]
 
-# lists all available robots from `lerobot/robots`
+# lists all available robots from `lerobot/common/robot_devices/robots`
 available_robots = [
     "koch",
     "koch_bimanual",
@@ -179,13 +184,13 @@ available_robots = [
     "so101",
 ]
 
-# lists all available cameras from `lerobot/cameras`
+# lists all available cameras from `lerobot/common/robot_devices/cameras`
 available_cameras = [
     "opencv",
     "intelrealsense",
 ]
 
-# lists all available motors from `lerobot/motors`
+# lists all available motors from `lerobot/common/robot_devices/motors`
 available_motors = [
     "dynamixel",
     "feetech",

lerobot/calibrate.py

@@ -18,7 +18,7 @@ Helper to recalibrate your device (robot or teleoperator).
 Example:
 
 ```shell
-lerobot-calibrate \
+python -m lerobot.calibrate \
     --teleop.type=so100_leader \
     --teleop.port=/dev/tty.usbmodem58760431551 \
     --teleop.id=blue
@@ -31,28 +31,21 @@ from pprint import pformat
 
 import draccus
 
-from lerobot.cameras.opencv.configuration_opencv import OpenCVCameraConfig  # noqa: F401
-from lerobot.cameras.realsense.configuration_realsense import RealSenseCameraConfig  # noqa: F401
-from lerobot.robots import (  # noqa: F401
+from lerobot.common.robots import (  # noqa: F401
     Robot,
     RobotConfig,
-    hope_jr,
     koch_follower,
-    lekiwi,
     make_robot_from_config,
     so100_follower,
-    so101_follower,
 )
-from lerobot.teleoperators import (  # noqa: F401
+from lerobot.common.teleoperators import (  # noqa: F401
     Teleoperator,
     TeleoperatorConfig,
-    homunculus,
-    koch_leader,
     make_teleoperator_from_config,
-    so100_leader,
-    so101_leader,
 )
-from lerobot.utils.utils import init_logging
+from lerobot.common.utils.utils import init_logging
+
+from .common.teleoperators import koch_leader, so100_leader  # noqa: F401
 
 
 @dataclass
@@ -82,9 +75,5 @@ def calibrate(cfg: CalibrateConfig):
     device.disconnect()
 
 
-def main():
-    calibrate()
-
-
 if __name__ == "__main__":
-    main()
+    calibrate()

lerobot/common/cameras/__init__.py

@@ -13,5 +13,5 @@
 # limitations under the License.
 
 from .camera import Camera
-from .configs import CameraConfig, ColorMode, Cv2Rotation
+from .configs import CameraConfig
 from .utils import make_cameras_from_configs

lerobot/common/cameras/camera.py

@@ -0,0 +1,49 @@
+#!/usr/bin/env python
+
+# Copyright 2024 The HuggingFace Inc. team. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+import abc
+
+import numpy as np
+
+from .configs import CameraConfig, ColorMode
+
+
+class Camera(abc.ABC):
+    def __init__(self, config: CameraConfig):
+        self.fps: int | None = config.fps
+        self.width: int | None = config.width
+        self.height: int | None = config.height
+
+    @property
+    @abc.abstractmethod
+    def is_connected(self) -> bool:
+        pass
+
+    @abc.abstractmethod
+    def connect(self, do_warmup_read: bool = True) -> None:
+        pass
+
+    @abc.abstractmethod
+    def read(self, color_mode: ColorMode | None = None) -> np.ndarray:
+        pass
+
+    @abc.abstractmethod
+    def async_read(self, timeout_ms: float = 2000) -> np.ndarray:
+        pass
+
+    @abc.abstractmethod
+    def disconnect(self) -> None:
+        pass

lerobot/common/cameras/configs.py

@@ -21,12 +21,12 @@ from enum import Enum
 import draccus
 
 
-class ColorMode(str, Enum):
+class ColorMode(Enum):
     RGB = "rgb"
     BGR = "bgr"
 
 
-class Cv2Rotation(int, Enum):
+class Cv2Rotation(Enum):
     NO_ROTATION = 0
     ROTATE_90 = 90
     ROTATE_180 = 180

lerobot/common/cameras/intel/camera_realsense.py

@@ -16,20 +16,20 @@
 Provides the RealSenseCamera class for capturing frames from Intel RealSense cameras.
 """
 
+import contextlib
 import logging
+import math
+import queue
 import time
-from threading import Event, Lock, Thread
-from typing import Any
+from threading import Event, Thread
+from typing import Any, Dict, List
 
 import cv2
 import numpy as np
+import pyrealsense2 as rs
 
-try:
-    import pyrealsense2 as rs
-except Exception as e:
-    logging.info(f"Could not import realsense: {e}")
-
-from lerobot.errors import DeviceAlreadyConnectedError, DeviceNotConnectedError
+from lerobot.common.errors import DeviceAlreadyConnectedError, DeviceNotConnectedError
+from lerobot.common.utils.utils import capture_timestamp_utc
 
 from ..camera import Camera
 from ..configs import ColorMode
@@ -51,7 +51,7 @@ class RealSenseCamera(Camera):
 
     Use the provided utility script to find available camera indices and default profiles:
     ```bash
-    lerobot-find-cameras realsense
+    python -m lerobot.find_cameras
     ```
 
     A `RealSenseCamera` instance requires a configuration object specifying the
@@ -61,44 +61,53 @@ class RealSenseCamera(Camera):
     The camera's default settings (FPS, resolution, color mode) from the stream
     profile are used unless overridden in the configuration.
 
+    Args:
+        config (RealSenseCameraConfig): Configuration object containing settings like
+            serial number or name, desired FPS, width, height, color mode, rotation,
+            and whether to capture depth.
+
     Example:
         ```python
-        from lerobot.cameras.realsense import RealSenseCamera, RealSenseCameraConfig
-        from lerobot.cameras import ColorMode, Cv2Rotation
+        from lerobot.common.cameras.intel.camera_realsense import RealSenseCamera
+        from lerobot.common.cameras.intel.configuration_realsense import RealSenseCameraConfig
+        from lerobot.common.cameras.configs import ColorMode
 
         # Basic usage with serial number
-        config = RealSenseCameraConfig(serial_number_or_name="0123456789") # Replace with actual SN
+        config = RealSenseCameraConfig(serial_number="1234567890") # Replace with actual SN
         camera = RealSenseCamera(config)
-        camera.connect()
-
-        # Read 1 frame synchronously
-        color_image = camera.read()
-        print(color_image.shape)
-
-        # Read 1 frame asynchronously
-        async_image = camera.async_read()
-
-        # When done, properly disconnect the camera using
-        camera.disconnect()
+        try:
+            camera.connect()
+            print(f"Connected to {camera}")
+            color_image = camera.read() # Synchronous read (color only)
+            print(f"Read frame shape: {color_image.shape}")
+            async_image = camera.async_read() # Asynchronous read
+            print(f"Async read frame shape: {async_image.shape}")
+        except Exception as e:
+            print(f"An error occurred: {e}")
+        finally:
+            camera.disconnect()
+            print(f"Disconnected from {camera}")
 
         # Example with depth capture and custom settings
         custom_config = RealSenseCameraConfig(
-            serial_number_or_name="0123456789", # Replace with actual SN
+            serial_number="1234567890", # Replace with actual SN
             fps=30,
             width=1280,
             height=720,
             color_mode=ColorMode.BGR, # Request BGR output
-            rotation=Cv2Rotation.NO_ROTATION,
+            rotation=0,
             use_depth=True
         )
         depth_camera = RealSenseCamera(custom_config)
-        depth_camera.connect()
-
-        # Read 1 depth frame
-        depth_map = depth_camera.read_depth()
+        try:
+            depth_camera.connect()
+            color_image, depth_map = depth_camera.read() # Returns tuple
+            print(f"Color shape: {color_image.shape}, Depth shape: {depth_map.shape}")
+        finally:
+            depth_camera.disconnect()
 
         # Example using a unique camera name
-        name_config = RealSenseCameraConfig(serial_number_or_name="Intel RealSense D435") # If unique
+        name_config = RealSenseCameraConfig(name="Intel RealSense D435") # If unique
         name_camera = RealSenseCamera(name_config)
         # ... connect, read, disconnect ...
         ```
@@ -116,33 +125,37 @@ class RealSenseCamera(Camera):
 
         self.config = config
 
-        if config.serial_number_or_name.isdigit():
-            self.serial_number = config.serial_number_or_name
+        if config.name is not None:  # NOTE(Steven): Do we want to continue supporting this?
+            self.serial_number = self._find_serial_number_from_name(config.name)
+        elif config.serial_number is not None:
+            self.serial_number = str(config.serial_number)
         else:
-            self.serial_number = self._find_serial_number_from_name(config.serial_number_or_name)
+            raise ValueError("RealSenseCameraConfig must provide either 'serial_number' or 'name'.")
 
-        self.fps = config.fps
-        self.color_mode = config.color_mode
-        self.use_depth = config.use_depth
-        self.warmup_s = config.warmup_s
+        self.fps: int | None = config.fps
+        self.channels: int = config.channels
+        self.color_mode: ColorMode = config.color_mode
+        self.use_depth: bool = config.use_depth
 
         self.rs_pipeline: rs.pipeline | None = None
         self.rs_profile: rs.pipeline_profile | None = None
 
         self.thread: Thread | None = None
         self.stop_event: Event | None = None
-        self.frame_lock: Lock = Lock()
-        self.latest_frame: np.ndarray | None = None
-        self.new_frame_event: Event = Event()
+        self.frame_queue: queue.Queue = queue.Queue(maxsize=1)
+
+        self.logs: dict = {}  # For timestamping or other metadata
 
         self.rotation: int | None = get_cv2_rotation(config.rotation)
 
         if self.height and self.width:
-            self.capture_width, self.capture_height = self.width, self.height
             if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-                self.capture_width, self.capture_height = self.height, self.width
+                self.prerotated_width, self.prerotated_height = self.height, self.width
+            else:
+                self.prerotated_width, self.prerotated_height = self.width, self.height
 
     def __str__(self) -> str:
+        """Returns a string representation of the camera instance."""
         return f"{self.__class__.__name__}({self.serial_number})"
 
     @property
@@ -150,66 +163,36 @@ class RealSenseCamera(Camera):
         """Checks if the camera pipeline is started and streams are active."""
         return self.rs_pipeline is not None and self.rs_profile is not None
 
-    def connect(self, warmup: bool = True):
-        """
-        Connects to the RealSense camera specified in the configuration.
-
-        Initializes the RealSense pipeline, configures the required streams (color
-        and optionally depth), starts the pipeline, and validates the actual stream settings.
-
-        Raises:
-            DeviceAlreadyConnectedError: If the camera is already connected.
-            ValueError: If the configuration is invalid (e.g., missing serial/name, name not unique).
-            ConnectionError: If the camera is found but fails to start the pipeline or no RealSense devices are detected at all.
-            RuntimeError: If the pipeline starts but fails to apply requested settings.
-        """
-        if self.is_connected:
-            raise DeviceAlreadyConnectedError(f"{self} is already connected.")
-
-        self.rs_pipeline = rs.pipeline()
-        rs_config = rs.config()
-        self._configure_rs_pipeline_config(rs_config)
-
-        try:
-            self.rs_profile = self.rs_pipeline.start(rs_config)
-        except RuntimeError as e:
-            self.rs_profile = None
-            self.rs_pipeline = None
-            raise ConnectionError(
-                f"Failed to open {self}.Run `lerobot-find-cameras realsense` to find available cameras."
-            ) from e
-
-        self._configure_capture_settings()
-
-        if warmup:
-            time.sleep(
-                1
-            )  # NOTE(Steven): RS cameras need a bit of time to warm up before the first read. If we don't wait, the first read from the warmup will raise.
-            start_time = time.time()
-            while time.time() - start_time < self.warmup_s:
-                self.read()
-                time.sleep(0.1)
-
-        logger.info(f"{self} connected.")
-
     @staticmethod
-    def find_cameras() -> list[dict[str, Any]]:
+    def find_cameras(raise_when_empty: bool = True) -> List[Dict[str, Any]]:
         """
         Detects available Intel RealSense cameras connected to the system.
 
+        Args:
+            raise_when_empty (bool): If True, raises an OSError if no cameras are found.
+
         Returns:
             List[Dict[str, Any]]: A list of dictionaries,
             where each dictionary contains 'type', 'id' (serial number), 'name',
             firmware version, USB type, and other available specs, and the default profile properties (width, height, fps, format).
 
         Raises:
-            OSError: If pyrealsense2 is not installed.
+            OSError: If `raise_when_empty` is True and no cameras are detected,
+                     or if pyrealsense2 is not installed.
             ImportError: If pyrealsense2 is not installed.
         """
         found_cameras_info = []
         context = rs.context()
         devices = context.query_devices()
 
+        if not devices:
+            logger.warning("No RealSense devices detected.")
+            if raise_when_empty:
+                raise OSError(
+                    "No RealSense devices detected. Ensure cameras are connected, "
+                    "library (`pyrealsense2`) is installed, and firmware is up-to-date."
+                )
+
         for device in devices:
             camera_info = {
                 "name": device.get_info(rs.camera_info.name),
@@ -240,12 +223,14 @@ class RealSenseCamera(Camera):
                         camera_info["default_stream_profile"] = stream_info
 
             found_cameras_info.append(camera_info)
+            logger.debug(f"Found RealSense camera: {camera_info}")
 
+        logger.info(f"Detected RealSense cameras: {[cam['id'] for cam in found_cameras_info]}")
         return found_cameras_info
 
     def _find_serial_number_from_name(self, name: str) -> str:
         """Finds the serial number for a given unique camera name."""
-        camera_infos = self.find_cameras()
+        camera_infos = self.find_cameras(raise_when_empty=True)
         found_devices = [cam for cam in camera_infos if str(cam["name"]) == name]
 
         if not found_devices:
@@ -262,53 +247,159 @@ class RealSenseCamera(Camera):
             )
 
         serial_number = str(found_devices[0]["serial_number"])
+        logger.info(f"Found serial number '{serial_number}' for camera name '{name}'.")
         return serial_number
 
-    def _configure_rs_pipeline_config(self, rs_config):
+    def _configure_realsense_settings(self) -> rs.config:
         """Creates and configures the RealSense pipeline configuration object."""
+        rs_config = rs.config()
         rs.config.enable_device(rs_config, self.serial_number)
 
         if self.width and self.height and self.fps:
+            logger.debug(
+                f"Requesting Color Stream: {self.prerotated_width}x{self.prerotated_height} @ {self.fps} FPS, Format: {rs.format.rgb8}"
+            )
             rs_config.enable_stream(
-                rs.stream.color, self.capture_width, self.capture_height, rs.format.rgb8, self.fps
+                rs.stream.color, self.prerotated_width, self.prerotated_height, rs.format.rgb8, self.fps
             )
             if self.use_depth:
+                logger.debug(
+                    f"Requesting Depth Stream: {self.prerotated_width}x{self.prerotated_height} @ {self.fps} FPS, Format: {rs.format.z16}"
+                )
                 rs_config.enable_stream(
-                    rs.stream.depth, self.capture_width, self.capture_height, rs.format.z16, self.fps
+                    rs.stream.depth, self.prerotated_width, self.prerotated_height, rs.format.z16, self.fps
                 )
         else:
+            logger.debug(f"Requesting Color Stream: Default settings, Format: {rs.stream.color}")
             rs_config.enable_stream(rs.stream.color)
             if self.use_depth:
+                logger.debug(f"Requesting Depth Stream: Default settings, Format: {rs.stream.depth}")
                 rs_config.enable_stream(rs.stream.depth)
 
-    def _configure_capture_settings(self) -> None:
-        """Sets fps, width, and height from device stream if not already configured.
+        return rs_config
 
-        Uses the color stream profile to update unset attributes. Handles rotation by
-        swapping width/height when needed. Original capture dimensions are always stored.
+    def _validate_capture_settings(self) -> None:
+        """
+        Validates if the actual stream settings match the requested configuration.
+
+        This method compares the requested FPS, width, and height against the
+        actual settings obtained from the active RealSense profile after the
+        pipeline has started.
 
         Raises:
-            DeviceNotConnectedError: If device is not connected.
+            RuntimeError: If the actual camera settings significantly deviate
+                          from the requested ones.
+            DeviceNotConnectedError: If the camera is not connected when attempting
+                                     to validate settings.
         """
         if not self.is_connected:
             raise DeviceNotConnectedError(f"Cannot validate settings for {self} as it is not connected.")
 
-        stream = self.rs_profile.get_stream(rs.stream.color).as_video_stream_profile()
+        self._validate_fps(self.rs_profile.get_stream(rs.stream.color).as_video_stream_profile())
+        self._validate_width_and_height(self.rs_profile.get_stream(rs.stream.color).as_video_stream_profile())
+
+        if self.use_depth:
+            self._validate_fps(self.rs_profile.get_stream(rs.stream.depth).as_video_stream_profile())
+            self._validate_width_and_height(
+                self.rs_profile.get_stream(rs.stream.depth).as_video_stream_profile()
+            )
+
+    def connect(self, do_warmup_read: bool = True):
+        """
+        Connects to the RealSense camera specified in the configuration.
+
+        Initializes the RealSense pipeline, configures the required streams (color
+        and optionally depth), starts the pipeline, and validates the actual stream settings.
+
+        Raises:
+            DeviceAlreadyConnectedError: If the camera is already connected.
+            ValueError: If the configuration is invalid (e.g., missing serial/name, name not unique).
+            ConnectionError: If the camera is found but fails to start the pipeline.
+            RuntimeError: If the pipeline starts but fails to apply requested settings.
+            OSError: If no RealSense devices are detected at all.
+        """
+        if self.is_connected:
+            raise DeviceAlreadyConnectedError(f"{self} is already connected.")
+
+        logger.debug(f"Attempting to connect to camera {self.serial_number}...")
+        self.rs_pipeline = rs.pipeline()
+        rs_config = self._configure_realsense_settings()
+
+        try:
+            self.rs_profile = self.rs_pipeline.start(rs_config)
+            logger.debug(f"Successfully started pipeline for camera {self.serial_number}.")
+        except RuntimeError as e:
+            self.rs_profile = None
+            self.rs_pipeline = None
+            raise ConnectionError(
+                f"Failed to open RealSense camera {self.serial_number}. Error: {e}. "
+                f"Run 'python -m find_cameras list-cameras' for details."
+            ) from e
+
+        logger.debug(f"Validating stream configuration for {self.serial_number}...")
+        self._validate_capture_settings()
+
+        if do_warmup_read:
+            logger.debug(f"Reading a warm-up frame for {self.serial_number}...")
+            self.read()  # NOTE(Steven): For now we just read one frame, we could also loop for X frames/secs
+
+        logger.info(f"Camera {self.serial_number} connected and configured successfully.")
+
+    def _validate_fps(self, stream) -> None:
+        """Validates and sets the internal FPS based on actual stream FPS."""
+        actual_fps = stream.fps()
 
         if self.fps is None:
-            self.fps = stream.fps()
+            self.fps = actual_fps
+            logger.info(f"FPS not specified, using camera default: {self.fps} FPS.")
+            return
+
+        # Use math.isclose for robust float comparison
+        if not math.isclose(self.fps, actual_fps, rel_tol=1e-3):
+            logger.warning(
+                f"Requested FPS {self.fps} for {self}, but camera reported {actual_fps}. "
+                "This might be due to camera limitations."
+            )
+            raise RuntimeError(
+                f"Failed to set requested FPS {self.fps} for {self}. Actual value reported: {actual_fps}."
+            )
+        logger.debug(f"FPS set to {actual_fps} for {self}.")
+
+    def _validate_width_and_height(self, stream) -> None:
+        """Validates and sets the internal capture width and height based on actual stream width."""
+        actual_width = int(round(stream.width()))
+        actual_height = int(round(stream.height()))
 
         if self.width is None or self.height is None:
-            actual_width = int(round(stream.width()))
-            actual_height = int(round(stream.height()))
             if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
                 self.width, self.height = actual_height, actual_width
-                self.capture_width, self.capture_height = actual_width, actual_height
+                self.prerotated_width, self.prerotated_height = actual_width, actual_height
             else:
                 self.width, self.height = actual_width, actual_height
-                self.capture_width, self.capture_height = actual_width, actual_height
+                self.prerotated_width, self.prerotated_height = actual_width, actual_height
+            logger.info(f"Capture width set to camera default: {self.width}.")
+            logger.info(f"Capture height set to camera default: {self.height}.")
+            return
 
-    def read_depth(self, timeout_ms: int = 200) -> np.ndarray:
+        if self.prerotated_width != actual_width:
+            logger.warning(
+                f"Requested capture width {self.prerotated_width} for {self}, but camera reported {actual_width}."
+            )
+            raise RuntimeError(
+                f"Failed to set requested capture width {self.prerotated_width} for {self}. Actual value: {actual_width}."
+            )
+        logger.debug(f"Capture width set to {actual_width} for {self}.")
+
+        if self.prerotated_height != actual_height:
+            logger.warning(
+                f"Requested capture height {self.prerotated_height} for {self}, but camera reported {actual_height}."
+            )
+            raise RuntimeError(
+                f"Failed to set requested capture height {self.prerotated_height} for {self}. Actual value: {actual_height}."
+            )
+        logger.debug(f"Capture height set to {actual_height} for {self}.")
+
+    def read_depth(self, timeout_ms: int = 5000) -> np.ndarray:
         """
         Reads a single frame (depth) synchronously from the camera.
 
@@ -316,7 +407,7 @@ class RealSenseCamera(Camera):
         from the camera hardware via the RealSense pipeline.
 
         Args:
-            timeout_ms (int): Maximum time in milliseconds to wait for a frame. Defaults to 200ms.
+            timeout_ms (int): Maximum time in milliseconds to wait for a frame. Defaults to 5000ms.
 
         Returns:
             np.ndarray: The depth map as a NumPy array (height, width)
@@ -329,29 +420,35 @@ class RealSenseCamera(Camera):
 
         if not self.is_connected:
             raise DeviceNotConnectedError(f"{self} is not connected.")
+
         if not self.use_depth:
             raise RuntimeError(
-                f"Failed to capture depth frame '.read_depth()'. Depth stream is not enabled for {self}."
+                f"Failed to capture depth frame from {self}. '.read_depth()'. Depth stream is not enabled."
             )
 
         start_time = time.perf_counter()
 
-        ret, frame = self.rs_pipeline.try_wait_for_frames(timeout_ms=timeout_ms)
+        ret, frame = self.rs_pipeline.try_wait_for_frames(
+            timeout_ms=timeout_ms
+        )  # NOTE(Steven): This read has a timeout
 
         if not ret or frame is None:
-            raise RuntimeError(f"{self} read_depth failed (status={ret}).")
+            raise RuntimeError(
+                f"Failed to capture frame from {self}. '.read_depth()' returned status={ret} and frame is None."
+            )
 
         depth_frame = frame.get_depth_frame()
         depth_map = np.asanyarray(depth_frame.get_data())
 
-        depth_map_processed = self._postprocess_image(depth_map, depth_frame=True)
+        depth_map_processed = self._postprocess_image(depth_map)
 
         read_duration_ms = (time.perf_counter() - start_time) * 1e3
-        logger.debug(f"{self} read took: {read_duration_ms:.1f}ms")
+        logger.debug(f"{self} synchronous read took: {read_duration_ms:.1f}ms")
 
+        self.logs["timestamp_utc"] = capture_timestamp_utc()
         return depth_map_processed
 
-    def read(self, color_mode: ColorMode | None = None, timeout_ms: int = 200) -> np.ndarray:
+    def read(self, color_mode: ColorMode | None = None, timeout_ms: int = 5000) -> np.ndarray:
         """
         Reads a single frame (color) synchronously from the camera.
 
@@ -359,7 +456,7 @@ class RealSenseCamera(Camera):
         from the camera hardware via the RealSense pipeline.
 
         Args:
-            timeout_ms (int): Maximum time in milliseconds to wait for a frame. Defaults to 200ms.
+            timeout_ms (int): Maximum time in milliseconds to wait for a frame. Defaults to 5000ms.
 
         Returns:
             np.ndarray: The captured color frame as a NumPy array
@@ -376,10 +473,14 @@ class RealSenseCamera(Camera):
 
         start_time = time.perf_counter()
 
-        ret, frame = self.rs_pipeline.try_wait_for_frames(timeout_ms=timeout_ms)
+        ret, frame = self.rs_pipeline.try_wait_for_frames(
+            timeout_ms=timeout_ms
+        )  # NOTE(Steven): This read has a timeout while opencv doesn't
 
         if not ret or frame is None:
-            raise RuntimeError(f"{self} read failed (status={ret}).")
+            raise RuntimeError(
+                f"Failed to capture frame from {self}. '.read()' returned status={ret} and frame is None."
+            )
 
         color_frame = frame.get_color_frame()
         color_image_raw = np.asanyarray(color_frame.get_data())
@@ -387,13 +488,12 @@ class RealSenseCamera(Camera):
         color_image_processed = self._postprocess_image(color_image_raw, color_mode)
 
         read_duration_ms = (time.perf_counter() - start_time) * 1e3
-        logger.debug(f"{self} read took: {read_duration_ms:.1f}ms")
+        logger.debug(f"{self} synchronous read took: {read_duration_ms:.1f}ms")
 
+        self.logs["timestamp_utc"] = capture_timestamp_utc()
         return color_image_processed
 
-    def _postprocess_image(
-        self, image: np.ndarray, color_mode: ColorMode | None = None, depth_frame: bool = False
-    ) -> np.ndarray:
+    def _postprocess_image(self, image: np.ndarray, color_mode: ColorMode | None = None) -> np.ndarray:
         """
         Applies color conversion, dimension validation, and rotation to a raw color frame.
 
@@ -416,25 +516,25 @@ class RealSenseCamera(Camera):
                 f"Invalid requested color mode '{color_mode}'. Expected {ColorMode.RGB} or {ColorMode.BGR}."
             )
 
-        if depth_frame:
-            h, w = image.shape
-        else:
-            h, w, c = image.shape
+        h, w, c = image.shape
 
-            if c != 3:
-                raise RuntimeError(f"{self} frame channels={c} do not match expected 3 channels (RGB/BGR).")
-
-        if h != self.capture_height or w != self.capture_width:
+        if h != self.prerotated_height or w != self.prerotated_width:
             raise RuntimeError(
-                f"{self} frame width={w} or height={h} do not match configured width={self.capture_width} or height={self.capture_height}."
+                f"Captured frame dimensions ({h}x{w}) do not match configured capture dimensions ({self.prerotated_height}x{self.prerotated_width}) for {self}."
+            )
+        if c != self.channels:
+            logger.warning(
+                f"Captured frame channels ({c}) do not match configured channels ({self.channels}) for {self}."
             )
 
         processed_image = image
         if self.color_mode == ColorMode.BGR:
             processed_image = cv2.cvtColor(image, cv2.COLOR_RGB2BGR)
+            logger.debug(f"Converted frame from RGB to BGR for {self}.")
 
-        if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE, cv2.ROTATE_180]:
+        if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
             processed_image = cv2.rotate(processed_image, self.rotation)
+            logger.debug(f"Rotated frame by {self.config.rotation} degrees for {self}.")
 
         return processed_image
 
@@ -442,27 +542,29 @@ class RealSenseCamera(Camera):
         """
         Internal loop run by the background thread for asynchronous reading.
 
-        On each iteration:
-        1. Reads a color frame with 500ms timeout
-        2. Stores result in latest_frame (thread-safe)
-        3. Sets new_frame_event to notify listeners
-
-        Stops on DeviceNotConnectedError, logs other errors and continues.
+        Continuously reads frames (color and optional depth) using `read()`
+        and places the latest result (single image or tuple) into the `frame_queue`.
+        It overwrites any previous frame in the queue.
         """
+        logger.debug(f"Starting read loop thread for {self}.")
         while not self.stop_event.is_set():
             try:
-                color_image = self.read(timeout_ms=500)
+                frame_data = self.read(timeout_ms=500)
 
-                with self.frame_lock:
-                    self.latest_frame = color_image
-                self.new_frame_event.set()
+                with contextlib.suppress(queue.Empty):
+                    _ = self.frame_queue.get_nowait()
+                self.frame_queue.put(frame_data)
+                logger.debug(f"Frame data placed in queue for {self}.")
 
             except DeviceNotConnectedError:
+                logger.error(f"Read loop for {self} stopped: Camera disconnected.")
                 break
             except Exception as e:
                 logger.warning(f"Error reading frame in background thread for {self}: {e}")
 
-    def _start_read_thread(self) -> None:
+        logger.debug(f"Stopping read loop thread for {self}.")
+
+    def _ensure_read_thread_running(self):
         """Starts or restarts the background read thread if it's not running."""
         if self.thread is not None and self.thread.is_alive():
             self.thread.join(timeout=0.1)
@@ -470,33 +572,26 @@ class RealSenseCamera(Camera):
             self.stop_event.set()
 
         self.stop_event = Event()
-        self.thread = Thread(target=self._read_loop, args=(), name=f"{self}_read_loop")
+        self.thread = Thread(
+            target=self._read_loop, args=(), name=f"RealSenseReadLoop-{self}-{self.serial_number}"
+        )
         self.thread.daemon = True
         self.thread.start()
-
-    def _stop_read_thread(self):
-        """Signals the background read thread to stop and waits for it to join."""
-        if self.stop_event is not None:
-            self.stop_event.set()
-
-        if self.thread is not None and self.thread.is_alive():
-            self.thread.join(timeout=2.0)
-
-        self.thread = None
-        self.stop_event = None
+        logger.debug(f"Read thread started for {self}.")
 
     # NOTE(Steven): Missing implementation for depth for now
-    def async_read(self, timeout_ms: float = 200) -> np.ndarray:
+    def async_read(self, timeout_ms: float = 2000) -> np.ndarray:
         """
-        Reads the latest available frame data (color) asynchronously.
+        Reads the latest available frame data (color or color+depth) asynchronously.
 
-        This method retrieves the most recent color frame captured by the background
+        This method retrieves the most recent frame captured by the background
         read thread. It does not block waiting for the camera hardware directly,
-        but may wait up to timeout_ms for the background thread to provide a frame.
+        only waits for a frame to appear in the internal queue up to the specified
+        timeout.
 
         Args:
             timeout_ms (float): Maximum time in milliseconds to wait for a frame
-                to become available. Defaults to 200ms (0.2 seconds).
+                to become available in the queue. Defaults to 2000ms (2 seconds).
 
         Returns:
             np.ndarray:
@@ -505,29 +600,48 @@ class RealSenseCamera(Camera):
         Raises:
             DeviceNotConnectedError: If the camera is not connected.
             TimeoutError: If no frame data becomes available within the specified timeout.
-            RuntimeError: If the background thread died unexpectedly or another error occurs.
+            RuntimeError: If the background thread died unexpectedly or another queue error occurs.
         """
         if not self.is_connected:
             raise DeviceNotConnectedError(f"{self} is not connected.")
 
         if self.thread is None or not self.thread.is_alive():
-            self._start_read_thread()
+            self._ensure_read_thread_running()
 
-        if not self.new_frame_event.wait(timeout=timeout_ms / 1000.0):
+        try:
+            return self.frame_queue.get(timeout=timeout_ms / 1000.0)
+        except queue.Empty as e:
             thread_alive = self.thread is not None and self.thread.is_alive()
-            raise TimeoutError(
-                f"Timed out waiting for frame from camera {self} after {timeout_ms} ms. "
-                f"Read thread alive: {thread_alive}."
+            logger.error(
+                f"Timeout waiting for frame from {self} queue after {timeout_ms}ms. "
+                f"(Read thread alive: {thread_alive})"
             )
+            raise TimeoutError(
+                f"Timed out waiting for frame from camera {self.serial_number} after {timeout_ms} ms. "
+                f"Read thread alive: {thread_alive}."
+            ) from e
+        except Exception as e:
+            logger.exception(f"Unexpected error getting frame data from queue for {self}: {e}")
+            raise RuntimeError(
+                f"Error getting frame data from queue for camera {self.serial_number}: {e}"
+            ) from e
 
-        with self.frame_lock:
-            frame = self.latest_frame
-            self.new_frame_event.clear()
+    def _shutdown_read_thread(self):
+        """Signals the background read thread to stop and waits for it to join."""
+        if self.stop_event is not None:
+            logger.debug(f"Signaling stop event for read thread of {self}.")
+            self.stop_event.set()
 
-        if frame is None:
-            raise RuntimeError(f"Internal error: Event set but no frame available for {self}.")
+        if self.thread is not None and self.thread.is_alive():
+            logger.debug(f"Waiting for read thread of {self} to join...")
+            self.thread.join(timeout=2.0)
+            if self.thread.is_alive():
+                logger.warning(f"Read thread for {self} did not terminate gracefully after 2 seconds.")
+            else:
+                logger.debug(f"Read thread for {self} joined successfully.")
 
-        return frame
+        self.thread = None
+        self.stop_event = None
 
     def disconnect(self):
         """
@@ -544,12 +658,15 @@ class RealSenseCamera(Camera):
                 f"Attempted to disconnect {self}, but it appears already disconnected."
             )
 
+        logger.debug(f"Disconnecting from camera {self.serial_number}...")
+
         if self.thread is not None:
-            self._stop_read_thread()
+            self._shutdown_read_thread()
 
         if self.rs_pipeline is not None:
+            logger.debug(f"Stopping RealSense pipeline object for {self}.")
             self.rs_pipeline.stop()
             self.rs_pipeline = None
             self.rs_profile = None
 
-        logger.info(f"{self} disconnected.")
+        logger.info(f"Camera {self.serial_number} disconnected successfully.")

lerobot/common/cameras/intel/configuration_realsense.py

@@ -28,36 +28,39 @@ class RealSenseCameraConfig(CameraConfig):
     Example configurations for Intel RealSense D405:
     ```python
     # Basic configurations
-    RealSenseCameraConfig("0123456789", 30, 1280, 720)  # 1280x720 @ 30FPS
-    RealSenseCameraConfig("0123456789", 60, 640, 480)  # 640x480 @ 60FPS
+    RealSenseCameraConfig(128422271347, 30, 1280, 720)   # 1280x720 @ 30FPS
+    RealSenseCameraConfig(128422271347, 60, 640, 480)   # 640x480 @ 60FPS
 
     # Advanced configurations
-    RealSenseCameraConfig("0123456789", 30, 640, 480, use_depth=True)  # With depth sensing
-    RealSenseCameraConfig("0123456789", 30, 640, 480, rotation=Cv2Rotation.ROTATE_90)  # With 90° rotation
+    RealSenseCameraConfig(128422271347, 30, 640, 480, use_depth=True)  # With depth sensing
+    RealSenseCameraConfig(128422271347, 30, 640, 480, rotation=Cv2Rotation.ROTATE_90)     # With 90° rotation
     ```
 
     Attributes:
         fps: Requested frames per second for the color stream.
         width: Requested frame width in pixels for the color stream.
         height: Requested frame height in pixels for the color stream.
-        serial_number_or_name: Unique serial number or human-readable name to identify the camera.
+        name: Optional human-readable name to identify the camera.
+        serial_number: Optional unique serial number to identify the camera.
+                      Either name or serial_number must be provided.
         color_mode: Color mode for image output (RGB or BGR). Defaults to RGB.
+        channels: Number of color channels (currently only 3 is supported).
         use_depth: Whether to enable depth stream. Defaults to False.
         rotation: Image rotation setting (0°, 90°, 180°, or 270°). Defaults to no rotation.
-        warmup_s: Time reading frames before returning from connect (in seconds)
 
     Note:
-        - Either name or serial_number must be specified.
+        - Either name or serial_number must be specified, but not both.
         - Depth stream configuration (if enabled) will use the same FPS as the color stream.
         - The actual resolution and FPS may be adjusted by the camera to the nearest supported mode.
-        - For `fps`, `width` and `height`, either all of them need to be set, or none of them.
+        - Only 3-channel color output (RGB/BGR) is currently supported.
     """
 
-    serial_number_or_name: str
+    name: str | None = None
+    serial_number: int | None = None
     color_mode: ColorMode = ColorMode.RGB
+    channels: int | None = 3
     use_depth: bool = False
-    rotation: Cv2Rotation = Cv2Rotation.NO_ROTATION
-    warmup_s: int = 1
+    rotation: Cv2Rotation = Cv2Rotation.NO_ROTATION  # NOTE(Steven): Check if draccus can parse to an enum
 
     def __post_init__(self):
         if self.color_mode not in (ColorMode.RGB, ColorMode.BGR):
@@ -75,8 +78,10 @@ class RealSenseCameraConfig(CameraConfig):
                 f"`rotation` is expected to be in {(Cv2Rotation.NO_ROTATION, Cv2Rotation.ROTATE_90, Cv2Rotation.ROTATE_180, Cv2Rotation.ROTATE_270)}, but {self.rotation} is provided."
             )
 
-        values = (self.fps, self.width, self.height)
-        if any(v is not None for v in values) and any(v is None for v in values):
+        if self.channels != 3:
+            raise NotImplementedError(f"Unsupported number of channels: {self.channels}")
+
+        if bool(self.name) and bool(self.serial_number):
             raise ValueError(
-                "For `fps`, `width` and `height`, either all of them need to be set, or none of them."
+                f"One of them must be set: name or serial_number, but {self.name=} and {self.serial_number=} provided."
             )

lerobot/common/cameras/opencv/camera_opencv.py

@@ -16,25 +16,24 @@
 Provides the OpenCVCamera class for capturing frames from cameras using OpenCV.
 """
 
+import contextlib
 import logging
 import math
-import os
 import platform
+import queue
 import time
 from pathlib import Path
-from threading import Event, Lock, Thread
-from typing import Any
+from threading import Event, Thread
+from typing import Any, Dict, List
 
-# Fix MSMF hardware transform compatibility for Windows before importing cv2
-if platform.system() == "Windows" and "OPENCV_VIDEOIO_MSMF_ENABLE_HW_TRANSFORMS" not in os.environ:
-    os.environ["OPENCV_VIDEOIO_MSMF_ENABLE_HW_TRANSFORMS"] = "0"
 import cv2
 import numpy as np
 
-from lerobot.errors import DeviceAlreadyConnectedError, DeviceNotConnectedError
+from lerobot.common.errors import DeviceAlreadyConnectedError, DeviceNotConnectedError
+from lerobot.common.utils.utils import capture_timestamp_utc
 
 from ..camera import Camera
-from ..utils import get_cv2_backend, get_cv2_rotation
+from ..utils import IndexOrPath, get_cv2_backend, get_cv2_rotation
 from .configuration_opencv import ColorMode, OpenCVCameraConfig
 
 # NOTE(Steven): The maximum opencv device index depends on your operating system. For instance,
@@ -60,31 +59,36 @@ class OpenCVCamera(Camera):
     or port changes, especially on Linux. Use the provided utility script to find
     available camera indices or paths:
     ```bash
-    lerobot-find-cameras opencv
+    python -m lerobot.find_cameras
     ```
 
     The camera's default settings (FPS, resolution, color mode) are used unless
     overridden in the configuration.
 
+    Args:
+        config (OpenCVCameraConfig): Configuration object containing settings like
+            camera index/path, desired FPS, width, height, color mode, and rotation.
+
     Example:
         ```python
-        from lerobot.cameras.opencv import OpenCVCamera
-        from lerobot.cameras.configuration_opencv import OpenCVCameraConfig, ColorMode, Cv2Rotation
+        from lerobot.common.cameras.opencv import OpenCVCamera
+        from lerobot.common.cameras.configuration_opencv import OpenCVCameraConfig, ColorMode
 
         # Basic usage with camera index 0
         config = OpenCVCameraConfig(index_or_path=0)
         camera = OpenCVCamera(config)
-        camera.connect()
-
-        # Read 1 frame synchronously
-        color_image = camera.read()
-        print(color_image.shape)
-
-        # Read 1 frame asynchronously
-        async_image = camera.async_read()
-
-        # When done, properly disconnect the camera using
-        camera.disconnect()
+        try:
+            camera.connect()
+            print(f"Connected to {camera}")
+            color_image = camera.read() # Synchronous read
+            print(f"Read frame shape: {color_image.shape}")
+            async_image = camera.async_read() # Asynchronous read
+            print(f"Async read frame shape: {async_image.shape}")
+        except Exception as e:
+            print(f"An error occurred: {e}")
+        finally:
+            camera.disconnect()
+            print(f"Disconnected from {camera}")
 
         # Example with custom settings
         custom_config = OpenCVCameraConfig(
@@ -93,7 +97,7 @@ class OpenCVCamera(Camera):
             width=1280,
             height=720,
             color_mode=ColorMode.RGB,
-            rotation=Cv2Rotation.ROTATE_90
+            rotation=90
         )
         custom_camera = OpenCVCamera(custom_config)
         # ... connect, read, disconnect ...
@@ -110,73 +114,37 @@ class OpenCVCamera(Camera):
         super().__init__(config)
 
         self.config = config
-        self.index_or_path = config.index_or_path
+        self.index_or_path: IndexOrPath = config.index_or_path
 
-        self.fps = config.fps
-        self.color_mode = config.color_mode
-        self.warmup_s = config.warmup_s
+        self.fps: int | None = config.fps
+        self.channels: int = config.channels
+        self.color_mode: ColorMode = config.color_mode
 
-        self.videocapture: cv2.VideoCapture | None = None
+        self.videocapture_camera: cv2.VideoCapture | None = None
 
         self.thread: Thread | None = None
         self.stop_event: Event | None = None
-        self.frame_lock: Lock = Lock()
-        self.latest_frame: np.ndarray | None = None
-        self.new_frame_event: Event = Event()
+        self.frame_queue: queue.Queue = queue.Queue(maxsize=1)
+
+        self.logs: dict = {}  # NOTE(Steven): Might be removed in the future
 
         self.rotation: int | None = get_cv2_rotation(config.rotation)
-        self.backend: int = get_cv2_backend()
+        self.backend: int = get_cv2_backend()  # NOTE(Steven): If we specify backend the opencv open fails
 
         if self.height and self.width:
-            self.capture_width, self.capture_height = self.width, self.height
             if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-                self.capture_width, self.capture_height = self.height, self.width
+                self.prerotated_width, self.prerotated_height = self.height, self.width
+            else:
+                self.prerotated_width, self.prerotated_height = self.width, self.height
 
     def __str__(self) -> str:
+        """Returns a string representation of the camera instance."""
         return f"{self.__class__.__name__}({self.index_or_path})"
 
     @property
     def is_connected(self) -> bool:
         """Checks if the camera is currently connected and opened."""
-        return isinstance(self.videocapture, cv2.VideoCapture) and self.videocapture.isOpened()
-
-    def connect(self, warmup: bool = True):
-        """
-        Connects to the OpenCV camera specified in the configuration.
-
-        Initializes the OpenCV VideoCapture object, sets desired camera properties
-        (FPS, width, height), and performs initial checks.
-
-        Raises:
-            DeviceAlreadyConnectedError: If the camera is already connected.
-            ConnectionError: If the specified camera index/path is not found or the camera is found but fails to open.
-            RuntimeError: If the camera opens but fails to apply requested FPS/resolution settings.
-        """
-        if self.is_connected:
-            raise DeviceAlreadyConnectedError(f"{self} is already connected.")
-
-        # Use 1 thread for OpenCV operations to avoid potential conflicts or
-        # blocking in multi-threaded applications, especially during data collection.
-        cv2.setNumThreads(1)
-
-        self.videocapture = cv2.VideoCapture(self.index_or_path, self.backend)
-
-        if not self.videocapture.isOpened():
-            self.videocapture.release()
-            self.videocapture = None
-            raise ConnectionError(
-                f"Failed to open {self}.Run `lerobot-find-cameras opencv` to find available cameras."
-            )
-
-        self._configure_capture_settings()
-
-        if warmup:
-            start_time = time.time()
-            while time.time() - start_time < self.warmup_s:
-                self.read()
-                time.sleep(0.1)
-
-        logger.info(f"{self} connected.")
+        return isinstance(self.videocapture_camera, cv2.VideoCapture) and self.videocapture_camera.isOpened()
 
     def _configure_capture_settings(self) -> None:
         """
@@ -199,57 +167,122 @@ class OpenCVCamera(Camera):
         if not self.is_connected:
             raise DeviceNotConnectedError(f"Cannot configure settings for {self} as it is not connected.")
 
-        if self.fps is None:
-            self.fps = self.videocapture.get(cv2.CAP_PROP_FPS)
-        else:
-            self._validate_fps()
+        self._validate_fps()
+        self._validate_width_and_height()
 
-        default_width = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_WIDTH)))
-        default_height = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_HEIGHT)))
+    def connect(self, do_warmup_read: bool = True):
+        """
+        Connects to the OpenCV camera specified in the configuration.
 
-        if self.width is None or self.height is None:
-            self.width, self.height = default_width, default_height
-            self.capture_width, self.capture_height = default_width, default_height
-            if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
-                self.width, self.height = default_height, default_width
-                self.capture_width, self.capture_height = default_width, default_height
-        else:
-            self._validate_width_and_height()
+        Initializes the OpenCV VideoCapture object, sets desired camera properties
+        (FPS, width, height), and performs initial checks.
+
+        Raises:
+            DeviceAlreadyConnectedError: If the camera is already connected.
+            ValueError: If the specified camera index/path is not found or accessible.
+            ConnectionError: If the camera is found but fails to open.
+            RuntimeError: If the camera opens but fails to apply requested FPS/resolution settings.
+        """
+        if self.is_connected:
+            raise DeviceAlreadyConnectedError(f"{self} is already connected.")
+
+        # Use 1 thread for OpenCV operations to avoid potential conflicts or
+        # blocking in multi-threaded applications, especially during data collection.
+        cv2.setNumThreads(1)
+
+        logger.debug(f"Attempting to connect to camera {self.index_or_path} using backend {self.backend}...")
+        self.videocapture_camera = cv2.VideoCapture(self.index_or_path)
+
+        if not self.videocapture_camera.isOpened():
+            self.videocapture_camera.release()
+            self.videocapture_camera = None
+            raise ConnectionError(
+                f"Failed to open OpenCV camera {self.index_or_path}."
+                f"Run 'python -m find_cameras list-cameras' for details."
+            )
+
+        logger.debug(f"Successfully opened camera {self.index_or_path}. Applying configuration...")
+        self._configure_capture_settings()
+
+        if do_warmup_read:
+            logger.debug(f"Reading a warm-up frame for {self.index_or_path}...")
+            self.read()  # NOTE(Steven): For now we just read one frame, we could also loop for X frames/secs
+
+        logger.debug(f"Camera {self.index_or_path} connected and configured successfully.")
 
     def _validate_fps(self) -> None:
         """Validates and sets the camera's frames per second (FPS)."""
 
-        success = self.videocapture.set(cv2.CAP_PROP_FPS, float(self.fps))
-        actual_fps = self.videocapture.get(cv2.CAP_PROP_FPS)
+        if self.fps is None:
+            self.fps = self.videocapture_camera.get(cv2.CAP_PROP_FPS)
+            logger.info(f"FPS set to camera default: {self.fps}.")
+            return
+
+        success = self.videocapture_camera.set(cv2.CAP_PROP_FPS, float(self.fps))
+        actual_fps = self.videocapture_camera.get(cv2.CAP_PROP_FPS)
         # Use math.isclose for robust float comparison
         if not success or not math.isclose(self.fps, actual_fps, rel_tol=1e-3):
-            raise RuntimeError(f"{self} failed to set fps={self.fps} ({actual_fps=}).")
+            logger.warning(
+                f"Requested FPS {self.fps} for {self}, but camera reported {actual_fps} (set success: {success}). "
+                "This might be due to camera limitations."
+            )
+            raise RuntimeError(
+                f"Failed to set requested FPS {self.fps} for {self}. Actual value reported: {actual_fps}."
+            )
+        logger.debug(f"FPS set to {actual_fps} for {self}.")
 
     def _validate_width_and_height(self) -> None:
         """Validates and sets the camera's frame capture width and height."""
 
-        width_success = self.videocapture.set(cv2.CAP_PROP_FRAME_WIDTH, float(self.capture_width))
-        height_success = self.videocapture.set(cv2.CAP_PROP_FRAME_HEIGHT, float(self.capture_height))
+        default_width = int(round(self.videocapture_camera.get(cv2.CAP_PROP_FRAME_WIDTH)))
+        default_height = int(round(self.videocapture_camera.get(cv2.CAP_PROP_FRAME_HEIGHT)))
 
-        actual_width = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_WIDTH)))
-        if not width_success or self.capture_width != actual_width:
-            raise RuntimeError(
-                f"{self} failed to set capture_width={self.capture_width} ({actual_width=}, {width_success=})."
-            )
+        if self.width is None or self.height is None:
+            if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
+                self.width, self.height = default_height, default_width
+                self.prerotated_width, self.prerotated_height = default_width, default_height
+            else:
+                self.width, self.height = default_width, default_height
+                self.prerotated_width, self.prerotated_height = default_width, default_height
+            logger.info(f"Capture width set to camera default: {self.width}.")
+            logger.info(f"Capture height set to camera default: {self.height}.")
+            return
 
-        actual_height = int(round(self.videocapture.get(cv2.CAP_PROP_FRAME_HEIGHT)))
-        if not height_success or self.capture_height != actual_height:
-            raise RuntimeError(
-                f"{self} failed to set capture_height={self.capture_height} ({actual_height=}, {height_success=})."
+        success = self.videocapture_camera.set(cv2.CAP_PROP_FRAME_WIDTH, float(self.prerotated_width))
+        actual_width = int(round(self.videocapture_camera.get(cv2.CAP_PROP_FRAME_WIDTH)))
+        if not success or self.prerotated_width != actual_width:
+            logger.warning(
+                f"Requested capture width {self.prerotated_width} for {self}, but camera reported {actual_width} (set success: {success})."
             )
+            raise RuntimeError(
+                f"Failed to set requested capture width {self.prerotated_width} for {self}. Actual value: {actual_width}."
+            )
+        logger.debug(f"Capture width set to {actual_width} for {self}.")
+
+        success = self.videocapture_camera.set(cv2.CAP_PROP_FRAME_HEIGHT, float(self.prerotated_height))
+        actual_height = int(round(self.videocapture_camera.get(cv2.CAP_PROP_FRAME_HEIGHT)))
+        if not success or self.prerotated_height != actual_height:
+            logger.warning(
+                f"Requested capture height {self.prerotated_height} for {self}, but camera reported {actual_height} (set success: {success})."
+            )
+            raise RuntimeError(
+                f"Failed to set requested capture height {self.prerotated_height} for {self}. Actual value: {actual_height}."
+            )
+        logger.debug(f"Capture height set to {actual_height} for {self}.")
 
     @staticmethod
-    def find_cameras() -> list[dict[str, Any]]:
+    def find_cameras(
+        max_index_search_range=MAX_OPENCV_INDEX, raise_when_empty: bool = True
+    ) -> List[Dict[str, Any]]:
         """
         Detects available OpenCV cameras connected to the system.
 
         On Linux, it scans '/dev/video*' paths. On other systems (like macOS, Windows),
-        it checks indices from 0 up to `MAX_OPENCV_INDEX`.
+        it checks indices from 0 up to `max_index_search_range`.
+
+        Args:
+            max_index_search_range (int): The maximum index to check on non-Linux systems.
+            raise_when_empty (bool): If True, raises an OSError if no cameras are found.
 
         Returns:
             List[Dict[str, Any]]: A list of dictionaries,
@@ -259,10 +292,15 @@ class OpenCVCamera(Camera):
         found_cameras_info = []
 
         if platform.system() == "Linux":
+            logger.info("Linux detected. Scanning '/dev/video*' device paths...")
             possible_paths = sorted(Path("/dev").glob("video*"), key=lambda p: p.name)
             targets_to_scan = [str(p) for p in possible_paths]
+            logger.debug(f"Found potential paths: {targets_to_scan}")
         else:
-            targets_to_scan = list(range(MAX_OPENCV_INDEX))
+            logger.info(
+                f"{platform.system()} system detected. Scanning indices from 0 to {max_index_search_range}..."
+            )
+            targets_to_scan = list(range(max_index_search_range))
 
         for target in targets_to_scan:
             camera = cv2.VideoCapture(target)
@@ -285,8 +323,15 @@ class OpenCVCamera(Camera):
                 }
 
                 found_cameras_info.append(camera_info)
+                logger.debug(f"Found OpenCV camera:: {camera_info}")
                 camera.release()
 
+        if not found_cameras_info:
+            logger.warning("No OpenCV devices detected.")
+            if raise_when_empty:
+                raise OSError("No OpenCV devices detected. Ensure cameras are connected.")
+
+        logger.info(f"Detected OpenCV cameras: {[cam['id'] for cam in found_cameras_info]}")
         return found_cameras_info
 
     def read(self, color_mode: ColorMode | None = None) -> np.ndarray:
@@ -317,16 +362,21 @@ class OpenCVCamera(Camera):
 
         start_time = time.perf_counter()
 
-        ret, frame = self.videocapture.read()
+        # NOTE(Steven): Are we okay with this blocking an undefined amount of time?
+        ret, frame = self.videocapture_camera.read()
 
         if not ret or frame is None:
-            raise RuntimeError(f"{self} read failed (status={ret}).")
+            raise RuntimeError(
+                f"Failed to capture frame from {self}. '.read()' returned status={ret} and frame is None."
+            )
 
+        # Post-process the frame (color conversion, dimension check, rotation)
         processed_frame = self._postprocess_image(frame, color_mode)
 
         read_duration_ms = (time.perf_counter() - start_time) * 1e3
-        logger.debug(f"{self} read took: {read_duration_ms:.1f}ms")
+        logger.debug(f"{self} synchronous read took: {read_duration_ms:.1f}ms")
 
+        self.logs["timestamp_utc"] = capture_timestamp_utc()
         return processed_frame
 
     def _postprocess_image(self, image: np.ndarray, color_mode: ColorMode | None = None) -> np.ndarray:
@@ -350,25 +400,28 @@ class OpenCVCamera(Camera):
 
         if requested_color_mode not in (ColorMode.RGB, ColorMode.BGR):
             raise ValueError(
-                f"Invalid color mode '{requested_color_mode}'. Expected {ColorMode.RGB} or {ColorMode.BGR}."
+                f"Invalid requested color mode '{requested_color_mode}'. Expected {ColorMode.RGB} or {ColorMode.BGR}."
             )
 
         h, w, c = image.shape
 
-        if h != self.capture_height or w != self.capture_width:
+        if h != self.prerotated_height or w != self.prerotated_width:
             raise RuntimeError(
-                f"{self} frame width={w} or height={h} do not match configured width={self.capture_width} or height={self.capture_height}."
+                f"Captured frame dimensions ({h}x{w}) do not match configured capture dimensions ({self.prerotated_height}x{self.prerotated_width}) for {self}."
+            )
+        if c != self.channels:
+            logger.warning(
+                f"Captured frame channels ({c}) do not match configured channels ({self.channels}) for {self}."
             )
-
-        if c != 3:
-            raise RuntimeError(f"{self} frame channels={c} do not match expected 3 channels (RGB/BGR).")
 
         processed_image = image
         if requested_color_mode == ColorMode.RGB:
             processed_image = cv2.cvtColor(image, cv2.COLOR_BGR2RGB)
+            logger.debug(f"Converted frame from BGR to RGB for {self}.")
 
-        if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE, cv2.ROTATE_180]:
+        if self.rotation in [cv2.ROTATE_90_CLOCKWISE, cv2.ROTATE_90_COUNTERCLOCKWISE]:
             processed_image = cv2.rotate(processed_image, self.rotation)
+            logger.debug(f"Rotated frame by {self.config.rotation} degrees for {self}.")
 
         return processed_image
 
@@ -376,27 +429,29 @@ class OpenCVCamera(Camera):
         """
         Internal loop run by the background thread for asynchronous reading.
 
-        On each iteration:
-        1. Reads a color frame
-        2. Stores result in latest_frame (thread-safe)
-        3. Sets new_frame_event to notify listeners
-
-        Stops on DeviceNotConnectedError, logs other errors and continues.
+        Continuously reads frames from the camera using the synchronous `read()`
+        method and places the latest frame into the `frame_queue`. It overwrites
+        any previous frame in the queue.
         """
+        logger.debug(f"Starting read loop thread for {self}.")
         while not self.stop_event.is_set():
             try:
                 color_image = self.read()
 
-                with self.frame_lock:
-                    self.latest_frame = color_image
-                self.new_frame_event.set()
+                with contextlib.suppress(queue.Empty):
+                    _ = self.frame_queue.get_nowait()
+                self.frame_queue.put(color_image)
+                logger.debug(f"Frame placed in queue for {self}.")
 
             except DeviceNotConnectedError:
+                logger.error(f"Read loop for {self} stopped: Camera disconnected.")
                 break
             except Exception as e:
                 logger.warning(f"Error reading frame in background thread for {self}: {e}")
 
-    def _start_read_thread(self) -> None:
+        logger.debug(f"Stopping read loop thread for {self}.")
+
+    def _ensure_read_thread_running(self):
         """Starts or restarts the background read thread if it's not running."""
         if self.thread is not None and self.thread.is_alive():
             self.thread.join(timeout=0.1)
@@ -404,32 +459,25 @@ class OpenCVCamera(Camera):
             self.stop_event.set()
 
         self.stop_event = Event()
-        self.thread = Thread(target=self._read_loop, args=(), name=f"{self}_read_loop")
+        self.thread = Thread(
+            target=self._read_loop, args=(), name=f"OpenCVCameraReadLoop-{self}-{self.index_or_path}"
+        )
         self.thread.daemon = True
         self.thread.start()
+        logger.debug(f"Read thread started for {self}.")
 
-    def _stop_read_thread(self) -> None:
-        """Signals the background read thread to stop and waits for it to join."""
-        if self.stop_event is not None:
-            self.stop_event.set()
-
-        if self.thread is not None and self.thread.is_alive():
-            self.thread.join(timeout=2.0)
-
-        self.thread = None
-        self.stop_event = None
-
-    def async_read(self, timeout_ms: float = 200) -> np.ndarray:
+    def async_read(self, timeout_ms: float = 2000) -> np.ndarray:
         """
         Reads the latest available frame asynchronously.
 
         This method retrieves the most recent frame captured by the background
         read thread. It does not block waiting for the camera hardware directly,
-        but may wait up to timeout_ms for the background thread to provide a frame.
+        only waits for a frame to appear in the internal queue up to the specified
+        timeout.
 
         Args:
             timeout_ms (float): Maximum time in milliseconds to wait for a frame
-                to become available. Defaults to 200ms (0.2 seconds).
+                to become available in the queue. Defaults to 2000ms (2 seconds).
 
         Returns:
             np.ndarray: The latest captured frame as a NumPy array in the format
@@ -438,29 +486,46 @@ class OpenCVCamera(Camera):
         Raises:
             DeviceNotConnectedError: If the camera is not connected.
             TimeoutError: If no frame becomes available within the specified timeout.
-            RuntimeError: If an unexpected error occurs.
+            RuntimeError: If an unexpected error occurs while retrieving from the queue.
         """
         if not self.is_connected:
             raise DeviceNotConnectedError(f"{self} is not connected.")
 
         if self.thread is None or not self.thread.is_alive():
-            self._start_read_thread()
+            self._ensure_read_thread_running()
 
-        if not self.new_frame_event.wait(timeout=timeout_ms / 1000.0):
+        try:
+            return self.frame_queue.get(timeout=timeout_ms / 1000.0)
+        except queue.Empty as e:
             thread_alive = self.thread is not None and self.thread.is_alive()
-            raise TimeoutError(
-                f"Timed out waiting for frame from camera {self} after {timeout_ms} ms. "
-                f"Read thread alive: {thread_alive}."
+            logger.error(
+                f"Timeout waiting for frame from {self} queue after {timeout_ms}ms. "
+                f"(Read thread alive: {thread_alive})"
             )
+            raise TimeoutError(
+                f"Timed out waiting for frame from camera {self.index_or_path} after {timeout_ms} ms. "
+                f"Read thread alive: {thread_alive}."
+            ) from e
+        except Exception as e:
+            logger.exception(f"Unexpected error getting frame from queue for {self}: {e}")
+            raise RuntimeError(f"Error getting frame from queue for camera {self.index_or_path}: {e}") from e
 
-        with self.frame_lock:
-            frame = self.latest_frame
-            self.new_frame_event.clear()
+    def _shutdown_read_thread(self):
+        """Signals the background read thread to stop and waits for it to join."""
+        if self.stop_event is not None:
+            logger.debug(f"Signaling stop event for read thread of {self}.")
+            self.stop_event.set()
 
-        if frame is None:
-            raise RuntimeError(f"Internal error: Event set but no frame available for {self}.")
+        if self.thread is not None and self.thread.is_alive():
+            logger.debug(f"Waiting for read thread of {self} to join...")
+            self.thread.join(timeout=2.0)
+            if self.thread.is_alive():
+                logger.warning(f"Read thread for {self} did not terminate gracefully after 2 seconds.")
+            else:
+                logger.debug(f"Read thread for {self} joined successfully.")
 
-        return frame
+        self.thread = None
+        self.stop_event = None
 
     def disconnect(self):
         """
@@ -473,13 +538,18 @@ class OpenCVCamera(Camera):
             DeviceNotConnectedError: If the camera is already disconnected.
         """
         if not self.is_connected and self.thread is None:
-            raise DeviceNotConnectedError(f"{self} not connected.")
+            raise DeviceNotConnectedError(
+                f"Attempted to disconnect {self}, but it appears already disconnected."
+            )
+
+        logger.debug(f"Disconnecting from camera {self.index_or_path}...")
 
         if self.thread is not None:
-            self._stop_read_thread()
+            self._shutdown_read_thread()
 
-        if self.videocapture is not None:
-            self.videocapture.release()
-            self.videocapture = None
+        if self.videocapture_camera is not None:
+            logger.debug(f"Releasing OpenCV VideoCapture object for {self}.")
+            self.videocapture_camera.release()
+            self.videocapture_camera = None
 
-        logger.info(f"{self} disconnected.")
+        logger.info(f"Camera {self.index_or_path} disconnected successfully.")

lerobot/common/cameras/opencv/configuration_opencv.py

@@ -44,8 +44,8 @@ class OpenCVCameraConfig(CameraConfig):
         width: Requested frame width in pixels for the color stream.
         height: Requested frame height in pixels for the color stream.
         color_mode: Color mode for image output (RGB or BGR). Defaults to RGB.
+        channels: Number of color channels (currently only 3 is supported).
         rotation: Image rotation setting (0°, 90°, 180°, or 270°). Defaults to no rotation.
-        warmup_s: Time reading frames before returning from connect (in seconds)
 
     Note:
         - Only 3-channel color output (RGB/BGR) is currently supported.
@@ -53,8 +53,8 @@ class OpenCVCameraConfig(CameraConfig):
 
     index_or_path: int | Path
     color_mode: ColorMode = ColorMode.RGB
+    channels: int = 3  # NOTE(Steven): Why is this a config?
     rotation: Cv2Rotation = Cv2Rotation.NO_ROTATION
-    warmup_s: int = 1
 
     def __post_init__(self):
         if self.color_mode not in (ColorMode.RGB, ColorMode.BGR):
@@ -71,3 +71,6 @@ class OpenCVCameraConfig(CameraConfig):
             raise ValueError(
                 f"`rotation` is expected to be in {(Cv2Rotation.NO_ROTATION, Cv2Rotation.ROTATE_90, Cv2Rotation.ROTATE_180, Cv2Rotation.ROTATE_270)}, but {self.rotation} is provided."
             )
+
+        if self.channels != 3:
+            raise NotImplementedError(f"Unsupported number of channels: {self.channels}")

lerobot/common/cameras/utils.py

@@ -18,6 +18,9 @@ import platform
 from pathlib import Path
 from typing import TypeAlias
 
+import numpy as np
+from PIL import Image
+
 from .camera import Camera
 from .configs import CameraConfig, Cv2Rotation
 
@@ -34,7 +37,7 @@ def make_cameras_from_configs(camera_configs: dict[str, CameraConfig]) -> dict[s
             cameras[key] = OpenCVCamera(cfg)
 
         elif cfg.type == "intelrealsense":
-            from .realsense.camera_realsense import RealSenseCamera
+            from .intel.camera_realsense import RealSenseCamera
 
             cameras[key] = RealSenseCamera(cfg)
         else:
@@ -43,25 +46,28 @@ def make_cameras_from_configs(camera_configs: dict[str, CameraConfig]) -> dict[s
     return cameras
 
 
-def get_cv2_rotation(rotation: Cv2Rotation) -> int | None:
+def get_cv2_rotation(rotation: Cv2Rotation) -> int:
     import cv2
 
-    if rotation == Cv2Rotation.ROTATE_90:
-        return cv2.ROTATE_90_CLOCKWISE
-    elif rotation == Cv2Rotation.ROTATE_180:
-        return cv2.ROTATE_180
-    elif rotation == Cv2Rotation.ROTATE_270:
-        return cv2.ROTATE_90_COUNTERCLOCKWISE
-    else:
-        return None
+    return {
+        Cv2Rotation.ROTATE_270: cv2.ROTATE_90_COUNTERCLOCKWISE,
+        Cv2Rotation.ROTATE_90: cv2.ROTATE_90_CLOCKWISE,
+        Cv2Rotation.ROTATE_180: cv2.ROTATE_180,
+    }.get(rotation)
 
 
 def get_cv2_backend() -> int:
     import cv2
 
-    if platform.system() == "Windows":
-        return cv2.CAP_MSMF  # Use MSMF for Windows instead of AVFOUNDATION
-    # elif platform.system() == "Darwin":  # macOS
-    #     return cv2.CAP_AVFOUNDATION
-    else:  # Linux and others
-        return cv2.CAP_ANY
+    return {
+        "Linux": cv2.CAP_DSHOW,
+        "Windows": cv2.CAP_AVFOUNDATION,
+        "Darwin": cv2.CAP_ANY,
+    }.get(platform.system(), cv2.CAP_V4L2)
+
+
+def save_image(img_array: np.ndarray, camera_index: int, frame_index: int, images_dir: Path):
+    img = Image.fromarray(img_array)
+    path = images_dir / f"camera_{camera_index:02d}_frame_{frame_index:06d}.png"
+    path.parent.mkdir(parents=True, exist_ok=True)
+    img.save(str(path), quality=100)

lerobot/common/constants.py

@@ -21,17 +21,9 @@ OBS_ENV_STATE = "observation.environment_state"
 OBS_STATE = "observation.state"
 OBS_IMAGE = "observation.image"
 OBS_IMAGES = "observation.images"
-OBS_LANGUAGE = "observation.language"
 ACTION = "action"
-REWARD = "next.reward"
-TRUNCATED = "next.truncated"
-DONE = "next.done"
-
-OBS_LANGUAGE_TOKENS = "observation.language.tokens"
-OBS_LANGUAGE_ATTENTION_MASK = "observation.language.attention_mask"
 
 ROBOTS = "robots"
-ROBOT_TYPE = "robot_type"
 TELEOPERATORS = "teleoperators"
 
 # files & directories
@@ -45,9 +37,6 @@ OPTIMIZER_STATE = "optimizer_state.safetensors"
 OPTIMIZER_PARAM_GROUPS = "optimizer_param_groups.json"
 SCHEDULER_STATE = "scheduler_state.json"
 
-PREPROCESSOR_DEFAULT_NAME = "robot_preprocessor"
-POSTPROCESSOR_DEFAULT_NAME = "robot_postprocessor"
-
 if "LEROBOT_HOME" in os.environ:
     raise ValueError(
         f"You have a 'LEROBOT_HOME' environment variable set to '{os.getenv('LEROBOT_HOME')}'.\n"

lerobot/common/datasets/backward_compatibility.py

@@ -20,7 +20,7 @@ The dataset you requested ({repo_id}) is in {version} format.
 We introduced a new format since v2.0 which is not backward compatible with v1.x.
 Please, use our conversion script. Modify the following command with your own task description:
 ```
-python -m lerobot.datasets.v2.convert_dataset_v1_to_v2 \\
+python lerobot/common/datasets/v2/convert_dataset_v1_to_v2.py \\
     --repo-id {repo_id} \\
     --single-task "TASK DESCRIPTION."  # <---- /!\\ Replace TASK DESCRIPTION /!\\
 ```
@@ -40,7 +40,7 @@ The dataset you requested ({repo_id}) is in {version} format.
 While current version of LeRobot is backward-compatible with it, the version of your dataset still uses global
 stats instead of per-episode stats. Update your dataset stats to the new format using this command:
 ```
-python -m lerobot.datasets.v21.convert_dataset_v20_to_v21 --repo-id={repo_id}
+python lerobot/common/datasets/v21/convert_dataset_v20_to_v21.py --repo-id={repo_id}
 ```
 
 If you encounter a problem, contact LeRobot maintainers on [Discord](https://discord.com/invite/s3KuuzsPFb)

lerobot/common/datasets/card_template.md

@@ -1,8 +1,7 @@
 ---
 # For reference on dataset card metadata, see the spec: https://github.com/huggingface/hub-docs/blob/main/datasetcard.md?plain=1
 # Doc / guide: https://huggingface.co/docs/hub/datasets-cards
-# prettier-ignore
-{{card_data}}
+{{ card_data }}
 ---
 
 This dataset was created using [LeRobot](https://github.com/huggingface/lerobot).

lerobot/common/datasets/compute_stats.py

@@ -15,7 +15,7 @@
 # limitations under the License.
 import numpy as np
 
-from lerobot.datasets.utils import load_image_as_numpy
+from lerobot.common.datasets.utils import load_image_as_numpy
 
 
 def estimate_num_samples(

lerobot/common/datasets/factory.py

@@ -18,14 +18,14 @@ from pprint import pformat
 
 import torch
 
-from lerobot.configs.policies import PreTrainedConfig
-from lerobot.configs.train import TrainPipelineConfig
-from lerobot.datasets.lerobot_dataset import (
+from lerobot.common.datasets.lerobot_dataset import (
     LeRobotDataset,
     LeRobotDatasetMetadata,
     MultiLeRobotDataset,
 )
-from lerobot.datasets.transforms import ImageTransforms
+from lerobot.common.datasets.transforms import ImageTransforms
+from lerobot.configs.policies import PreTrainedConfig
+from lerobot.configs.train import TrainPipelineConfig
 
 IMAGENET_STATS = {
     "mean": [[[0.485]], [[0.456]], [[0.406]]],  # (c,1,1)