* perf(libero): skip the discarded scene rebuild on reset
LIBERO's OffScreenRenderEnv defaults to hard_reset=True, so every reset() frees
the MjSim, re-serialises the scene with model.get_xml(), recompiles it with
MjSim.from_xml_string(), constructs a fresh offscreen GL context and re-wires
every observable.
When init states are in use, LiberoEnv.reset() immediately calls
set_init_state(), which overwrites the whole sim state -- so all of that work is
discarded. This passes hard_reset=not init_states instead. Without init states
the randomisation reset() performs is the only thing placing the objects, so the
hard reset is kept.
Measured on an RTX 3060 Ti (EGL, robosuite 1.4.0, mujoco 3.2.7, 256x256 x2
cameras), through LiberoEnv.reset(), fresh env per arm:
suite hard soft saved
libero_spatial 1697 ms 233 ms 1464 ms
libero_object 1394 ms 172 ms 1222 ms
libero_goal 1177 ms 164 ms 1013 ms
libero_10 1528 ms 207 ms 1321 ms
Equivalence
-----------
Immediately after set_init_state, qpos, qvel, ctrl and act are bit-identical
between the two paths on every suite tested.
After the 10 settle steps that reset() runs, 9 of 41 qpos entries differ:
robot0_joint1..7 (<= 2.4e-5 rad) and gripper0_finger_joint1/2 (<= 2.1e-4 rad).
No object joint differs on any suite. The drift is driven by the gripper
component of the settle action ([0,0,0,0,0,0,-1]); replacing it with zeros keeps
the two paths bit-identical for 12 further steps, and with num_steps_wait=0 there
is no divergence at all.
Wrist-camera pixels can differ by up to ~87/255, because a sub-millimetre finger
displacement crosses rasterisation boundaries at 256x256. The pixel metric badly
overstates the physical difference here; 2.1e-4 rad is 0.012 degrees.
So this is not bit-identical end to end, and reviewers should decide whether
0.012 degrees of gripper drift is acceptable for the benchmark. It does not
change object placement, which is what the fixed init states exist to control.
* refactor(env): config param libero + docs
---------
Co-authored-by: Dimitar Dimitrov <dvdimitrov13@gmail.com>
* refactor(training): rename eval_freq to env_eval_freq
- Rename eval_freq to env_eval_freq to distinguish sim environment evaluation from offline loss evaluation.
* feat(training): add inline offline validation with train/eval split
- Add eval_split config for balanced per-task holdout
- Add eval_steps for periodic inline eval loss computation
- Add max_eval_samples to cap eval cost
* fix(datasets): remap absolute indices in __getitem__ for filtered datasets
* fix(train): vectorize eval subset selection for max_eval_samples
* fix(datasets): Move the remapping into EpisodeAwareSampler via absolute_to_relative_idx
* fix(validation): add eval_split range check and eval_steps warning
Validate eval_split is in [0.0, 1.0) to prevent garbage splits from
out-of-range values. Raise when eval_steps > 0 but eval_split is 0.0
since no offline eval will run.
* fix(train): prepare eval dataloader with accelerator for multi-GPU
Prepare eval_dataloader through accelerator.prepare() so eval data is
sharded across ranks instead of duplicated. Reduce eval_loss across
ranks with mean reduction for consistent logging.
* fix(test): rename eval_freq to env_eval_freq for multi-GPU training
* initial commit
* change device in test
* do detailed import
* adhere to python 3.11 syntax
* fix autodocstring
* additionally
* do same in other files
* add model. prefix to all keys in state dict
* use dummy stats
* add pi05
* also shorten action_steps
* fix test
* all test pass! and fix tokenizer max length between 05 and 0
* remove test
* fix transformer dependency
* fix test
* split pi0 and pi05 policy in seperate files
* fix test
* fix push to hub test
* add some comments, license and readme
* remove warning in config
* add pi05 to factory
* remove check
* rename action_horizon to chunk_size
* clean up padding of state and action (more in line with lerobot pi0)
* add openpi image transforms for training and add more flexibility to _preprocess_images similar to lerobot pi0
* fix key match from pytorch state dict (similar keys to openpi implementation now)
* also for pi05
* update to python 3.11
* revert to openpi transformer replace python 3.11
* fix(modeling pi0): nit warning message
* use safeauto_docstring
* fix: remove unused param
* fix from pretrained
* add preprocess tests
* also compile forward method
* Do not add model prefix to normalization
* use same name for action and state dim as lerobot pi0 and remove fixed image keys
* load from pretrained_path
* temp: hardcode base model
* fix override self.pretrained_path = None overwrite
* rename to loss
* remove additional image augmentations, lerobot dataset already does this
* Add docs
* put tests in test folder
* Add test to instatiate all base models
* go back to python 3.10
* update docs
* adapt docs pi05
* change docs: finetune base model options
* minor docs fixes and dependencies
* remove todo
* cast float64 to float32 for mps
* skip if no transformers
* fix tests
* add new models to modelcard
* add back init
* fix circular input
* feat: only run pi test on GPU
* remove require_nightly_gpu
* replace decorator test_pi0_openpi
* rename action_dim, state_dim to max_action_dim, max_state_dim
* fix doc and constants
* cleanup tests
* fix from pretrained
* fix tests
* add comment pi0 pi05 tests, add image features to pi0 pi05 hub tests
* fix, state is included in language not in flow head
* Move test to specific folder
* and paligemma task with newline
* remove add_special_tokens, not needed
* feedback pr
* Remove previous pi0 and rename pi0_openpi and pi05_openpi
* Add Quantile stats to LeRobotDataset (#1985)
* - Add RunningQuantileStats class for efficient histogram-based quantile computation
- Integrate quantile parameters (compute_quantiles, quantiles) into LeRobotDataset
- Support quantile computation during episode collection and aggregation
- Add comprehensive function-based test suite (24 tests) for quantile functionality
- Maintain full backward compatibility with existing stats computation
- Enable configurable quantiles (default: [0.01, 0.99]) for robust normalization
* style fixes, make quantiles computation by default to new datasets
* fix tests
* - Added DEFAULT_QUANTILES=[0.01, 0.10, 0.50, 0.90, 0.99] to be computed for each features instead of being chosen by the user
- Fortified tests.
* - add helper functions to reshape stats
- add missing test for quantiles
* - Add QUANTILE normalization mode to normalize the data with the 1st and 99th percentiles.
- Add QUANTILE10 normalization mode to normalize the data with the 10th and 90th percentiles.
* style fixes
* Added missing lisence
* Simplify compute_stats
* - added script `augment_dataset_quantile_stats.py` so that we can add quantile stats to existing v3 datasets that dont have quatniles
- modified quantile computation instead of using the edge for the value, interpolate the values in the bin
* rename pi0/pi05 files
* Remove open pi patch and use custom transformer branch for now
* renaming
* fix
* Revert "fix"
This reverts commit 1ea65730ac.
* fix naming
* feet(pi0/pi0.5): add pipeline (#2009)
* feat(processor): convert openpi model with processor
* TODO: Make test works
* fix(modeling_pi0openpi): update attention mask value and time scaling; improve task handling in tests
- Changed the attention mask value from `self.config.attention_mask_value` to a fixed value of `-2.3819763e38`.
- Updated time scaling in the `sample_noise` method to use a constant factor of `0.999` and an offset of `0.001`.
- Enhanced task handling in tests to ensure proper formatting and batch size consistency.
- Cleaned up commented-out test code for clarity.
* refactor(pi0): rename PI0OpenPIConfig and PI0OpenPIPolicy to PI0Config and PI0Policy
- Updated imports and references throughout the codebase to reflect the new naming convention.
- Introduced a new processor file for PI0 to handle pre-processing and post-processing steps.
- Adjusted tests to utilize the renamed classes, ensuring consistency and functionality.
- Enhanced clarity and maintainability by removing outdated naming conventions.
* refactor(pi05): rename PI0OpenPIPolicy to PI0Policy and update configuration
- Renamed `PI0OpenPIPolicy` to `PI0Policy` for consistency with naming conventions.
- Updated the `PI05OpenPIConfig` to include a new `tokenizer_max_length` attribute and changed the normalization mode for state from `MEAN_STD` to `QUANTILES`.
- Simplified model initialization in `PI05OpenPIPolicy` by removing unused `dataset_stats` parameter.
- Added a new processor class for `Pi05PrepareStateTokenizerProcessorStep` with `@dataclass` for improved readability.
- Introduced a test script to compare the integration of the PI0OpenPI policy with the original implementation, ensuring local testing compatibility.
* feat(processor): convert openpi model with processor
* TODO: Make test works
* fix(modeling_pi0openpi): update attention mask value and time scaling; improve task handling in tests
- Changed the attention mask value from `self.config.attention_mask_value` to a fixed value of `-2.3819763e38`.
- Updated time scaling in the `sample_noise` method to use a constant factor of `0.999` and an offset of `0.001`.
- Enhanced task handling in tests to ensure proper formatting and batch size consistency.
- Cleaned up commented-out test code for clarity.
* refactor(pi0): rename PI0OpenPIConfig and PI0OpenPIPolicy to PI0Config and PI0Policy
- Updated imports and references throughout the codebase to reflect the new naming convention.
- Introduced a new processor file for PI0 to handle pre-processing and post-processing steps.
- Adjusted tests to utilize the renamed classes, ensuring consistency and functionality.
- Enhanced clarity and maintainability by removing outdated naming conventions.
* refactor(pi05): rename PI0OpenPIPolicy to PI0Policy and update configuration
- Renamed `PI0OpenPIPolicy` to `PI0Policy` for consistency with naming conventions.
- Updated the `PI05OpenPIConfig` to include a new `tokenizer_max_length` attribute and changed the normalization mode for state from `MEAN_STD` to `QUANTILES`.
- Simplified model initialization in `PI05OpenPIPolicy` by removing unused `dataset_stats` parameter.
- Added a new processor class for `Pi05PrepareStateTokenizerProcessorStep` with `@dataclass` for improved readability.
- Introduced a test script to compare the integration of the PI0OpenPI policy with the original implementation, ensuring local testing compatibility.
* refactor(pi05): update imports and rename configuration classes
- Changed imports to reflect the new naming convention for PI05 configuration and policy classes.
- Renamed `PI05OpenPIConfig` to `PI05Config` and `PI05OpenPIPolicy` to `PI05Policy` for consistency.
- Introduced a new processor file for PI05, implementing pre-processing and post-processing steps.
- Updated tests to utilize the renamed classes, ensuring functionality and consistency across the codebase.
* update(pi05): increase tokenizer_max_length for improved processing
- Changed the `tokenizer_max_length` from 48 to 200 to enhance the model's capability in handling longer sequences.
- This adjustment aims to improve the overall performance and flexibility of the PI05 configuration.
* add default for state (max_state_dim)
* correct naming
* fix import
* cleanup code
* remove unused test
* us quantiles for action
* move to device
* remove discrete state assert
* fix pi05 test
* move pi05 to device
* use base models in comparison tests
* small renames for tests
* change number of tokens pi05 test
* fix openpi tokenization in test
* fix hub test
* fix test
* assert lerobot vs openpi tests
---------
Co-authored-by: Pepijn <pepijn@huggingface.co>
* add headers
* add back previously removed imports
* update if statement load processor with dataset stats
* remove to avoid circular import
* inject dataset stats for pretrained models
* check normalization before applying
* add link to quantile augument script
* fix(policies): transformers import for ci in PI0 & PI05 (#2039)
* fix(policies): transformers import for ci in PI0
* fix(policies): transformers import for ci in PI05
* test(processor): fix expected raise when normalization types are missing (#2040)
* switch normalization order pipeline for pi05
* Fix/quantiles script (#2064)
* refactor augment stats with quantiles script
add parallelization for faster processing
shift the quantile normalization between -1 1
* fix replay buffer tests
* fix comment
* overwrite the pipeline normalization features with the policy features
* remove double normalization overwrite
* cleanup from pretrained
* remove typo
* also set norm_map
* fix(augment_quantiles) images incorrectly divided by 255
* clamp quantiles
* link to lerobot base models
* rename tests
* encorperate PR feedback
* update docstring for RunningQuantileStats
* update doc links
* Revert "clamp quantiles"
This reverts commit 172207471c.
* fix self.paligemma
* fix tests related to quantiles that were scaled to [0,1], the new range is [-1, 1]
* fix libero doc and use different transformer branch
* use fix branch instead of feat
* update results libero
* add new line
* fix formatting
* precommit
* update results libero
* update libero doc
* update title
* final changes
* add quantiles to test
* run pre commit
---------
Signed-off-by: Steven Palma <imstevenpmwork@ieee.org>
Co-authored-by: Michel Aractingi <michel.aractingi@huggingface.co>
Co-authored-by: Adil Zouitine <adilzouitinegm@gmail.com>
Co-authored-by: Steven Palma <imstevenpmwork@ieee.org>
Co-authored-by: Steven Palma <steven.palma@huggingface.co>
Steven Palma